giriiş
The Hunter NODE600 is a battery-powered irrigation controller designed for isolated sites or areas without AC power. This manual provides detailed instructions for the installation, programming, and maintenance of your NODE600 controller to ensure efficient and reliable operation of your irrigation system.
Ürün Bittiview
The NODE600 controller is built with a robust, waterproof exterior, making it suitable for installation within a valve box. It operates on 9V batteries and features an LCD screen for easy programming. The controller supports up to 6 stations, offering flexible scheduling options.
Şekil 1: Hunter NODE Controller Interface. This image displays the front panel of a Hunter NODE controller, showing the LCD screen, programming buttons (PRG, plus, minus, arrow keys, enter), and wiring connections for common (COM) and sensor (SEN) inputs. The screen shows a time of 3:43 PM and battery status.
Kurulum ve Yükleme
- Pil Montajı: The NODE600 requires one or two 9V alkaline batteries for operation. Open the battery compartment, insert the batteries, ensuring correct polarity, and securely close the compartment.
- Montaj: The controller is designed to mount directly to a valve's solenoid or within a valve box. Ensure the mounting location is secure and allows for easy access for programming and maintenance.
- Kablo Bağlantıları:
- Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled 'COM' on the controller.
- Station Wires: Connect each station wire from your valves to the corresponding numbered terminal (1-6) on the controller.
- Sensor Wires (Optional): If using a rain or soil moisture sensor, connect its wires to the terminals labeled 'SEN'. Refer to your sensor's manual for specific wiring instructions.
Kullanım Talimatları
The NODE600 utilizes standard Hunter controller programming logic, featuring 3 programs (A, B, C) and 4 start times per program.
Basic Programming Steps:
- Geçerli Saati ve Günü Ayarlayın:
- Basın PRG Zaman göstergesi yanıp sönene kadar düğmeye basın.
- Kullanın + or - Saati ayarlamak için düğmelere basın, ardından arrow right button to move to minutes and adjust.
- Basın arrow right button again to set the current day of the week. Use + or - seçmek için.
- Basmak PRG kaydedip çıkmak için.
- Program Start Times:
- Basmak PRG until 'START TIME' appears.
- Kullanın arrow right button to select Program A, B, or C.
- Kullanmak + or - to set the desired start time for the first cycle.
- Basmak arrow right to move to the next start time (up to 4 per program). Set or leave blank if not needed.
- Basmak PRG kaydetmek için.
- Set Station Run Times:
- Basmak PRG until 'RUN TIME' appears.
- Kullanın arrow right button to select the desired station (1-6) and program (A, B, or C).
- Kullanmak + or - to set the run time in minutes for that station.
- Repeat for all active stations in each program.
- Basmak PRG kaydetmek için.
- Set Watering Days:
- Basmak PRG until 'WATER DAYS' appears.
- Kullanın arrow right button to select Program A, B, or C.
- Choose your watering schedule: specific days of the week (MO, TU, WE, TH, FR, SA, SU), Odd/Even days, or Interval watering. Use + or - to select and the arrow right button to confirm or move between options.
- Basmak PRG kaydetmek için.
For detailed programming sequences, refer to the official Hunter Industries support resources or video tutorials, as the interface can require careful navigation.
Bakım
- Pil Değişimi: Replace 9V batteries annually or when the low battery indicator appears on the LCD screen. Use high-quality alkaline batteries for optimal performance.
- Çevre Koruma: While the NODE600 has a waterproof exterior, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions and physical damage.
- Temizlik: Kontrol ünitesinin dış yüzeyini periyodik olarak bir temizleyici ile temizleyin.amp Kir ve döküntüleri temizlemek için bir bez kullanın. Sert kimyasallar kullanmayın.
Sorun giderme
- Kontrol Cihazı Açılmıyor: Pil bağlantısını kontrol edin ve pillerin yeni olduğundan emin olun. Gerekirse değiştirin.
- Su Akışı Yok:
- Verify that the main water supply is on.
- Check wiring connections to valves and the common wire.
- Ensure run times and start times are correctly programmed.
- If a sensor is connected, check its status; it might be preventing watering.
- Programlama Zorlukları: The programming interface can be complex. Refer to the detailed programming steps in this manual or consult Hunter's official support resources for visual guides and further assistance.
- Tutarlı Olmayan İşlem: Ensure batteries are not low. Check for loose wiring connections.
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | DÜĞÜM600 |
| Ürün Boyutları | 5 x 7 x 10 inç |
| Ürün Ağırlığı | 1.2 pound |
| Güç Kaynağı | One or two 9V batteries |
| İstasyon Sayısı | 6 |
Garanti Bilgileri
Hunter Industries typically offers a warranty on its products. For specific warranty terms and conditions applicable to your NODE600 controller, please refer to the official documentation provided with your purchase or visit the Hunter Industries website. Warranty periods may be based on the product's manufacturing date code.
Müşteri Desteği
For further assistance, technical support, or detailed programming guidance, please contact Hunter Industries customer support. A reported support number is 1-800-733-2833, available from 6 AM to 4 PM Pacific Time. It is recommended to verify current contact information on the official Hunter Industries webalan.
