BWT CR10 NA 10" Karbon ve Reçine Kartuş Kullanım Kılavuzu

giriiş

This manual provides essential instructions for the installation, operation, and maintenance of your BWT CR10 NA 10" Carbon & Resin Cartridge. Please read this manual thoroughly before installation and retain it for future reference.

Ürün Bittiview

The BWT CR10 is a specialized carbon and resin cartridge designed for water filtration systems. It is engineered to fit standard BWT NDL2 filter housings. This cartridge effectively reduces chlorine, organic chemicals, and helps in minimizing scale and scum formation in water.

Temel Özellikler:

• Klor Azaltma: Significantly reduces chlorine content in water.
• Organic Chemical Removal: Filters out various organic chemicals for improved water quality.
• Scale and Scum Control: Aids in reducing the buildup of scale and scum.
• Standart Uyum: Designed to fit BWT NDL2 filter housings.

Özellikler

Kurulum ve Yükleme

Önemli: Installation should be performed by a qualified professional or someone with adequate plumbing experience. Always shut off the main water supply before beginning installation.

1. Sistemi Hazırlayın: Turn off the main water supply to the area where the filter housing is located. Open a nearby faucet to relieve pressure in the lines.
2. Access Filter Housing: Locate your BWT NDL2 filter housing. Depending on your setup, you may need a filter wrench to open the housing.
3. Eski kartuşu çıkarın (varsa): Carefully unscrew the filter housing sump. Remove the old cartridge and dispose of it properly.
4. Temiz Konut: Clean the inside of the filter housing sump with warm, soapy water and rinse thoroughly. Inspect the O-ring for any damage; replace if necessary. Lubricate the O-ring with a food-grade silicone grease if recommended by the housing manufacturer.
5. Yeni Kartuşu Takın: Unwrap the new BWT CR10 cartridge. Insert the cartridge into the filter housing, ensuring it is seated correctly in the center standpipe.
6. Muhafazayı Yeniden Birleştirin: Carefully screw the filter housing sump back onto the cap. Hand-tighten first, then use a filter wrench for a snug fit. Aşırı sıkmayın.
7. Su Teminini Geri Kazandırın: Ana su kaynağını yavaşça açın. Filtre yuvasının etrafında sızıntı olup olmadığını kontrol edin.
8. Sifon Sistemi: Open a nearby cold water faucet and allow water to run for several minutes (e.g., 5-10 minutes) to flush out any air and fine carbon particles from the new cartridge. The water may appear cloudy initially; this is normal and will clear.

Şekil 1: Ön view of the BWT CR10 filter cartridge, showing its cylindrical shape and blue color.

Kullanım Talimatları

Once installed and flushed, the BWT CR10 cartridge operates automatically as water flows through your filtration system. No further user interaction is required for its daily function.

• Ensure the water pressure remains within the specified limits (Maximum Pressure: 5 Bars).
• The cartridge is designed for cold water applications; do not exceed the maximum water temperature of 45 degrees C.

Şekil 2: Açılı view of the BWT CR10 filter cartridge, highlighting its overall form factor.

Bakım

Regular replacement of the BWT CR10 cartridge is crucial to maintain optimal water quality and system performance.

• Değiştirme Sıklığı: It is recommended that cartridges be changed at least every 3 ila 6 ay, or after approximately 1500 litre of filtered water, whichever comes first. This frequency may vary depending on local water quality and usage.
• Signs of Depletion: A noticeable decrease in water flow, a return of unpleasant tastes or odors, or a change in water clarity can indicate that the cartridge needs replacement.
• Değiştirme Prosedürü: Follow the "Setup and Installation" steps (1-7) for replacing the cartridge.

Şekil 3: Alt view of the BWT CR10 filter cartridge, showing the inlet/outlet structure.

Sorun giderme

This section addresses common issues you might encounter with your BWT CR10 cartridge.

• Azaltılmış Su Akışı:
  • Neden: Tıkalı filtre kartuşu.
  • Çözüm: Replace the cartridge. Ensure proper installation and flushing.
• Hoş Olmayan Tat veya Koku Geri Dönüyor:
  • Neden: Cartridge has reached its capacity.
  • Çözüm: Kartuşu değiştirin.
• Leaks Around Filter Housing:
  • Neden: Improperly seated O-ring, damaged O-ring, or housing not tightened correctly.
  • Çözüm: Shut off water, open housing, inspect and reseat/replace O-ring, then re-tighten housing.
• Cloudy Water After Cartridge Replacement:
  • Neden: Air or fine carbon particles from the new cartridge.
  • Çözüm: Flush the system by running cold water for 5-10 minutes until clear. This is normal.

Şekil 4: Tepe view of the BWT CR10 filter cartridge, showing the internal structure and sealing surface.

Garanti ve Destek

Specific warranty information for the BWT CR10 NA 10" Carbon & Resin Cartridge is not provided in this manual. For warranty details, technical support, or further assistance, please contact BWT customer service or refer to the official BWT webalan.

Üretici: BWT

Parça Numarası: CR10