Extech LT40 LED Işık Ölçer Kullanım Kılavuzu

1. Giriş

The Extech LT40 is a compact and accurate LED Light Meter designed for measuring light levels from white LED light sources, as well as standard light sources. This device is essential for professionals needing to monitor and optimize environmental light levels in various settings such as offices, warehouses, public lots, hallways, and stairways. It provides measurements in both Lux and Foot-Candle (FC) units.

Figure 1: Extech LT40 LED Light Meter

2. Güvenlik Bilgileri

Please read all safety information before operating the Extech LT40 LED Light Meter. Failure to follow these instructions may result in damage to the device or personal injury.

• Do not expose the meter to extreme temperatures or high humidity.
• Avoid dropping the meter or subjecting it to severe impact.
• Keep the sensor clean and free from obstructions to ensure accurate readings.
• Do not attempt to open the meter casing; İçerisinde kullanıcının müdahale edebileceği herhangi bir parça bulunmamaktadır.
• Pilleri yerel düzenlemelere göre atın.

3. Ürün Bittiview

3.1 Temel Özellikler

• USB interface for easy setup and data download.
• Seçilebilir verilerampling rates from 1 second to 24 hours.
• LCD displays current readings, min/max, and alarm status.
• Includes Windows 2000, XP, and Vista compatible analysis software.
• Measures white LED and standard lighting in Lux or Foot-Candle (FC) units.
• Features cosine and color corrected sensor for accurate measurements.

3.2 Bileşenler

The Extech LT40 LED Light Meter consists of the following main components:

• Işık Sensörü: Located at the top of the meter, responsible for detecting light.
• LCD Ekran: Ölçüm değerlerini, birimleri ve durum göstergelerini gösterir.
• Kontrol Düğmeleri:
  • Güç Düğmesi: Turns the meter on/off.
  • LUX/FC Düğmesi: Toggles between Lux and Foot-Candle units.
  • CAL/ZERO Button: Used for calibration and zeroing the sensor.
  • MAKS/DAK Düğmesi: Displays maximum and minimum recorded readings.
  • TUTMA Düğmesi: Ekrandaki mevcut okumayı dondurur.
• Pil Bölmesi: Ünitenin arka tarafında bulunur.
• USB Bağlantı Noktası: Veri aktarımı için bilgisayara bağlanmak üzere.

4. Kurulum

4.1 Pil Kurulumu

1. Locate the battery compartment on the back of the LT40 meter.
2. Pil kapağını kaydırarak açın.
3. Insert two (2) AAA batteries, ensuring correct polarity (+/-). The batteries are included with the meter.
4. Pil kapağını sıkıca kapatın.

4.2 Yazılım Kurulumu

The LT40 includes analysis software compatible with Windows 2000, XP, and Vista. Refer to the software's installation guide for detailed instructions on installing and configuring the software for data download and analysis.

5. Kullanım Talimatları

5.1 Bir Ölçüm Yapma

1. Basın Güç Sayacı açmak için düğmesine basın.
2. İstediğiniz birimi (Lux veya FC) seçmek için tuşuna basın. LUX/FC düğme.
3. Place the light sensor in the area where you wish to measure the light level. Ensure the sensor is facing the light source directly for accurate readings.
4. Read the light level displayed on the LCD.

Figure 2: Measuring light levels with the Extech LT40

5.2 Zeroing the Meter

To ensure accuracy, it is recommended to zero the meter before taking measurements, especially in low light conditions.

1. Place the protective cap over the light sensor to block all light.
2. Basın CAL/ZERO button. The display should show '0' or a very low value.
3. Remove the cap to begin measurements.

5.3 Using MAX/MIN and HOLD Functions

• MAKS/MIN: Basın MAKSİMUM/MİNİMUM button to cycle through the maximum, minimum, and current readings. This is useful for monitoring light level fluctuations over time.
• TUTMAK: Basın TUTMAK Ekrandaki mevcut okumayı dondurmak için düğmeye basın. Dondurma işlemini kaldırmak ve canlı ölçümlere devam etmek için tekrar basın.

5.4 Veri Kaydı ve Aktarımı

The LT40 supports data logging with selectable sampling rates. Connect the meter to a computer using the USB interface and utilize the included software to configure logging parameters, download recorded data, and perform analysis.

6. Bakım

Proper maintenance ensures the longevity and accuracy of your Extech LT40 LED Light Meter.

• Temizlik: Wipe the meter clean with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure the light sensor is free of dust and debris.
• Depolamak: Uzun süre kullanılmadığında, sızıntıyı önlemek için pilleri çıkarın. Ölçüm cihazını serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• Kalibrasyon: While the meter is designed for high accuracy, periodic professional calibration may be required depending on your application and industry standards. Refer to Extech's official support for calibration services.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

Extech Instruments is a trusted brand by professionals, sold in over 100 countries for over 45 years.

• Üretici: Ekstech
• Garanti: Üreticinin resmi açıklamasına bakın website or the documentation included with your product for specific warranty details and terms.
• Kullanım Kılavuzu (PDF): For a downloadable PDF version of the user manual, please visit the official Extech website or access it via this link: Extech LT40 User Manual PDF.
• Çevrimiçi destek: For additional support, FAQs, and product information, visit the official Extech store: Extech Mağazası Amazon'da.