PROEL Mi12 12-Channel Mixer with Effect User Manual

1. Giriş

This manual provides detailed instructions for the proper setup, operation, and maintenance of your PROEL Mi12 12-Channel Mixer with Effect. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. The Mi12 is a compact 12-channel, 2-bus mixer designed for various audio applications, featuring an integrated effects processor.

2. Güvenlik Talimatları

• Güç Kaynağı: Yalnızca belirtilen güç adaptörünü kullanın. Voltajın düşük olduğundan emin olun.tage yerel elektrik kaynağınıza uygundur.
• Su ve Nem: Bu cihazı yağmur veya neme maruz bırakmayın. Üzerine vazo gibi sıvı dolu nesneler koymayın.
• Havalandırma: Yeterli havalandırma sağlayın. Havalandırma açıklıklarını kapatmayın.
• Sıcaklık: Radyatörler, ısıtma petekleri, sobalar veya diğer cihazlar (dahil olmak üzere) gibi ısı kaynaklarının yakınına koymayın. amp(ısı üreten)
• Temizlik: Sadece kuru bezle temizleyin.
• Servis: Bu ürüne kendiniz servis vermeye çalışmayın. Tüm servis işlemleri için kalifiye servis personeline başvurun.
• Topraklama: Polarize veya topraklama tipi fişlerin güvenlik amacını ortadan kaldırmayın.

3. Paket İçeriği

Lütfen paketinizin aşağıdaki öğeleri içerdiğinden emin olun:

• PROEL Mi12 12-Channel Mixer
• Güç Adaptörü
• Kullanım Kılavuzu (bu belge)

4. Ürün Bittiview

The PROEL Mi12 is a versatile 12-channel mixer featuring a compact design and a comprehensive set of controls for various audio mixing tasks. It includes multiple input types, a 3-band EQ on mono channels, two auxiliary sends, and a built-in digital effects processor.

Şekil 4.1: Tepe view of the PROEL Mi12 mixer, illustrating the layout of all channels, controls, and the master section. This image provides a comprehensive look at the user interface, including input gains, EQ sections, auxiliary sends, pan controls, channel faders, the effects processor, and the main mix controls.

The mixer's top panel (Figure 4.1) is divided into several sections:

• Giriş Kanalları: Channels 1-4 feature XLR microphone inputs and 1/4" line inputs. Channels 5/6, 7/8, 9/10, and 11/12 are stereo line inputs.
• EQ Bölümü: Each mono channel (1-4) includes a 3-band equalizer (HIGH, MID, LOW).
• Yardımcı Gönderiler: Two auxiliary sends (AUX 1 PRE, AUX 2 POST) per channel for monitoring or external effects.
• Effects Processor (PROFX): A dedicated section with 256 digital effects, including reverbs, delays, and chorus.
• Ana Bölüm: Controls for the main mix output, control room output, headphone output, and level meters.

5. Kurulum

Follow these steps to set up your PROEL Mi12 mixer:

Şekil 5.1: Rear panel of the PROEL Mi12 mixer, highlighting the power input (18V) and the main power switch. This view is crucial for initial power connection and understanding the mixer's physical interface.

5.1 Güç Bağlantısı

1. Ensure the mixer's power switch (Figure 5.1) is in the OFF position.
2. Connect the supplied power adapter to the 18V DC input on the rear panel of the mixer.
3. Güç adaptörünü uygun bir AC elektrik prizine takın.
4. Turn the power switch to the ON position. The power indicator LED on the front panel should illuminate.

5.2 Ses Giriş Bağlantıları

• Microphones (Channels 1-4): Connect microphones using balanced XLR-F cables to the MIC inputs. If using condenser microphones, activate the +48V Phantom Power switch located in the master section.
• Hat Girişleri (Kanallar 1-4): Connect line-level instruments or devices (e.g., keyboards, guitars with preamps) using balanced 1/4" JACK cables to the LINE inputs.
• Stereo Line Inputs (Channels 5/6, 7/8, 9/10, 11/12): Connect stereo line-level sources (e.g., media players, synthesizers) using 1/4" JACK cables. Use both LEFT and RIGHT inputs for stereo, or only the LEFT input for mono operation.

5.3 Ses Çıkış Bağlantıları

• Main Mix Output: Connect the MAIN MIX LEFT and RIGHT outputs (1/4" JACK) to your power ampdaha yüksek ses veren, güçlendirilmiş hoparlörler veya kayıt cihazı.
• Control Room Output: Connect C.ROOM LEFT and RIGHT outputs (1/4" JACK) to your studio monitors.
• Kulaklık Çıkışı: Connect your headphones to the PHONES output (1/4" JACK).

6. Kullanım Talimatları

6.1 Input Channels (1-12)

• KAZANÇ: Adjusts the input sensitivity for the connected microphone or line source. Set this so the PEAK LED flashes only occasionally during the loudest parts of the signal.
• LO CUT (Channels 1-4): Activates a 75 Hz high-pass filter to remove unwanted low-frequency rumble.
• EQ (HIGH, MID, LOW - Channels 1-4): These knobs adjust the treble (12 kHz), midrange (2.5 kHz), and bass (80 Hz) frequencies of the input signal. Use them to shape the tone of your instrument or vocal.
• AUX 1 PRE: Sends a portion of the channel signal to the AUX 1 output, independent of the channel fader. Typically used for monitor mixes.
• AUX 2 POST / FX: Sends a portion of the channel signal to the AUX 2 output and the internal effects processor, after the channel fader. Typically used for effects sends.
• PAN (Mono Kanallar) / BAL (Stereo Kanallar): Adjusts the position of the channel signal within the stereo field (left to right).
• Tepe LED'i: Giriş sinyali çok yüksek olduğunda yanar ve olası kırpılmayı gösterir. Bu LED sık sık yanıyorsa GAIN değerini azaltın.
• Channel Fader/Level: Controls the overall volume of the channel sent to the main mix.

6.2 Effects Processor (PROFX)

The Mi12 features a digital effects processor with 256 effects (16 presets x 16 variations).

• ÖN AYARLAR: Turn this knob to select one of the 16 effect types (e.g., Hall, Room, Vocal, Plate Reverbs, Delays, Chorus).
• VARYASYON: Turn this knob to select one of the 16 variations for the chosen effect preset.
• FX TO AUX 1: Controls the amount of the effect signal sent to the AUX 1 output.
• FX'TEN ANA ... Controls the amount of the effect signal sent to the main stereo mix.
• MUSLUK: Press this button to set the tempo for delay effects.

6.3 Ana Bölüm

• ANA MİKS Fader'ı: Ana stereo miksin genel çıkış ses seviyesini kontrol eder.
• MAIN MIX Meters: LED meters display the output level of the main mix. Aim for levels around 0 dB during normal operation, avoiding consistent red (clip) indications.
• C.ROOM / PHONES Level: Adjusts the volume for the Control Room outputs and the Headphone output.
• HAYALET AÇIK/KAPALI: Activates or deactivates +48V phantom power for condenser microphones connected to XLR inputs. Ensure this is OFF before connecting/disconnecting microphones.

7. Bakım

• Temizlik: Disconnect the mixer from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
• Depolamak: Uzun süre kullanılmadığı zamanlarda mikseri serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• Toz Koruması: Cover the mixer with a dust cover when not in use to prevent dust accumulation on controls and connectors.

8. Sorun Giderme

• Ses Çıkışı Yok:
  • Check all power connections and ensure the mixer is turned ON.
  • Verify that the MAIN MIX fader is up and not muted.
  • Check individual channel faders and GAIN controls.
  • Ensure output cables are correctly connected to your amplifier/speakers and that they are powered on.
• Bozuk Ses:
  • Reduce the GAIN control on the input channel if the PEAK LED is constantly lit.
  • Lower the channel fader or MAIN MIX fader if the main meters are consistently in the red.
  • Kablolarda veya bağlantılarda arıza olup olmadığını kontrol edin.
• Efektler Çalışmıyor:
  • Ensure the AUX 2 POST / FX knob on the desired channel is turned up.
  • Check the FX TO MAIN knob in the effects section.
  • Verify that an effect preset and variation are selected.

9. Özellikler

10. Garanti ve Destek

PROEL products are designed and manufactured to the highest quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official PROEL website. For technical support or service inquiries, please contact your authorized PROEL dealer or distributor.