Serta Comfort Ergo Executive Office Chair Instruction Manual

giriiş

Thank you for choosing the Serta Comfort Ergo Executive Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

Güvenlik Bilgileri

• Sandalyeyi her zaman verilen talimatlara göre monte edin.
• Lütfen azami ağırlık sınırını aşmayın. 275 kilo.
• Be cautious while moving the chair to prevent tipping or instability.
• Kullanmadan önce tüm cıvata ve vidaların iyice sıkıldığından emin olun. Periyodik olarak kontrol edin ve gerekirse tekrar sıkın.
• Sandalyenin üzerine çıkmaktan veya onu basamak olarak kullanmaktan kaçının.

Paket İçeriği

Montaja başlamadan önce tüm parçaların eksiksiz ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa lütfen müşteri desteğiyle iletişime geçin.

• Sandalye Arkalığı
• Sandalye Koltuk
• Kolçaklar (2)
• Yıldız Tabanı
• Tekerlekler (5)
• Gaz Kaldırma Silindiri
• Mekanizma Plakası
• Donanım Paketi (vidalar, rondelalar, Allen anahtarı)

Montaj Talimatları

Follow these step-by-step instructions for proper assembly. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

Adım 1: Tekerlekleri tabana takın

Yıldız tabanın her ayağının ucundaki deliklere beş tekerleği yerleştirin. Yerlerine oturana kadar sıkıca bastırın.

Image: The five-star base with casters inserted into each leg, ready for the gas lift.

Step 2: Insert Gas Lift Cylinder

Place the gas lift cylinder into the center hole of the assembled star base. No tools are required for this step; it will rest in place.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack, tightening with the Allen wrench.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and seat, aligning all holes and securing with screws. Do not fully tighten all screws until all components are loosely attached to allow for adjustment.

Adım 5: Koltuk Tertibatını Gazlı Asansöre Bağlayın

Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Apply gentle downward pressure to secure.

Ürün Özellikleri

The Serta Comfort Ergo Executive Office Chair is designed with several features to enhance your comfort and productivity:

• Ergonomic Mid-Back Design: Features subtle contours and lumbar support to promote proper posture.
• Semi-Plush Comfort: Double-layer seat cushion and padded armrests are generously filled with high-density foam.
• Durable Upholstery: Covered in soft velvet fabric for a luxurious feel.
• Ayarlanabilir yükseklik: Easily adjust the seat height to your preferred position.
• Tilt Lock Mechanism: Lock the chair in an upright position or allow for rocking motion.
• 360° Dönme: Allows for easy rotation and movement around your workspace.
• Sorunsuz Dönen Tekerlekler: Dual casters designed for easy mobility on various surfaces.

Image: A visual representation of the chair highlighting its key features, including the cushioned headrest, curved back support, padded armrests, foam-filled seat cushion, adjustable comfort, and 360-degree motion.

Resim: Yakın çekim view of the chair's headrest, emphasizing the specialized curved cushions for lasting comfort throughout the day.

Resim: Ayrıntılı view of the chair's foam-filled seat cushion, illustrating its high-quality foam for comfort and support.

Kullanım Talimatları

Yükseklik Ayarı

To adjust the seat height, lift the lever located on the right side of the chair (when seated) upwards. While holding the lever, either stand up to raise the seat or remain seated to lower it. Release the lever to lock the height in place.

Image: A diagram illustrating the height adjustment mechanism. Lift the lever on the side of the chair to raise or lower the seat.

Yatırma Ayarı

To unlock the recline mechanism, pull the same lever (on the right side) outwards. The chair back will now allow for a rocking motion. To lock the chair in an upright position, push the lever inwards. To adjust the tension of the recline, twist the round knob located underneath the seat at the front of the mechanism. Turn clockwise to increase tension (stiffer recline) and counter-clockwise to decrease tension (looser recline).

Image: A diagram showing the recline adjustment lever and the tension adjustment knob located beneath the seat. Pull the lever to unlock recline and twist the knob to adjust tension.

Sandalye Hareketi

The chair is equipped with 360° motion casters, allowing for easy movement and rotation around your workspace. Ensure the floor surface is clear of obstructions for smooth gliding.

Resim: Yakın çekim view of the chair's dual-wheel casters, illustrating their 360-degree motion capability for easy movement.

Bakım ve Özen

To maintain the appearance and longevity of your Serta Comfort Ergo Executive Office Chair, follow these care instructions:

• Temizlik: Yumuşak, d ile silerek temizleyinamp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the velvet fabric.
• Düzenli Kontroller: Tüm cıvata ve vidaların sıkı olduğundan emin olmak için periyodik olarak kontrol edin. Stabilite ve güvenliği sağlamak için gerekirse tekrar sıkın.
• Doğrudan Güneş Işığından Kaçının: Doğrudan güneş ışığına uzun süre maruz kalmak kumaşın solmasına neden olabilir.
• Ağırlık sınırı: Adhere to the maximum weight recommendation of 275 lbs to prevent structural damage.

Sorun giderme

If you encounter any issues with your chair, consider the following:

• Sandalye sallanıyor: Check all assembly screws and bolts. Ensure they are fully tightened.
• Gas lift not adjusting: Ensure the height adjustment lever is fully engaged or disengaged as required. If the issue persists, the gas lift may need replacement.
• Tekerlekler düzgün dönmüyor: Check for debris (hair, lint) caught in the caster wheels. Clean as necessary.
• Recline not working: Ensure the recline lock lever is disengaged. Adjust the tension knob if the recline feels too stiff or too loose.

For further assistance, please contact Serta Customer Support.

Özellikler

Image: A detailed diagram illustrating the product dimensions, including width, depth, back height, inner seat width, chair height, and seat height, along with the 275 lb weight capacity.

Garanti ve Destek

Serta chairs are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or contact Serta customer support.

Müşteri Desteği

Our dedicated U.S. based team is ready to assist you with your Serta chair and any help needed with its assembly or operation.

Image: Serta Customer Service contact information, including a phone number (800) 379 - 9773 and operating hours (6am - 5pm PST).

Telefon: (800) 379 - 9773
Saat: 6am - 5pm PST

Ürün Bittiview Video

Genel bir bakış için bu videoyu izleyin.view of Serta chairs and their design philosophy.