Hager WITTY Elektrikli Araç Şarj İstasyonu (Model XEV103) Kullanım Kılavuzu

1. Giriş

1.1. Üzeriview

The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.

1.2. Güvenlik Talimatları

• Kurulum, yerel ve ulusal elektrik yönetmeliklerine uygun olarak yetkili bir elektrikçi tarafından yapılmalıdır.
• Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
• Şarj istasyonunun doğru şekilde topraklanmış olduğundan emin olun.
• Do not use the charging station if it is damaged or shows signs of malfunction.
• Keep children and unauthorized persons away from the charging station during operation.
• Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.

2. Ürün Açıklaması

2.1. Özellikler

• Compatible with Mode 3 (Type 3) and Mode 2 charging.
• Free access operation.
• Power output: 4 kW to 22 kW.
• Input: 3-phase + Neutral, 32A.
• Integrated status indicator light.

2.2. Bileşenler

The Hager WITTY charging station typically includes:

• Şarj istasyonu ünitesi
• Montaj donanımı (vidalar, dübeller)
• Kullanım kılavuzu (bu belge)

Şekil 1: Ön view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.

Şekil 2: Taraf view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.

Şekil 3: Detaylı ön view of the Hager WITTY charging station, emphasizing the integrated green status light.

3. Kurulum

3.1. Kurulum Yeri

Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.

3.2. Montaj

1. Verilen şablonu kullanarak (varsa) veya ünitedeki montaj deliklerini ölçerek delme noktalarını duvara işaretleyin.
2. Delikler açın ve uygun duvar dübellerini yerleştirin.
3. Secure the charging station to the wall using the provided screws.

3.3. Elektriksel bağlantı

UYARI: Elektrik kurulumu kalifiye bir elektrikçi tarafından yapılmalıdır.

1. Ensure the main power supply is disconnected before beginning any electrical work.
2. Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
3. Uygun topraklamanın kurulduğundan emin olun.
4. Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
5. Close the charging station cover securely.

4. Çalıştırma

4.1. Starting a Charge

1. Ensure the charging station is powered on and the status indicator light is green (ready).
2. Şarj kablosunu elektrikli aracınızın şarj portuna bağlayın.
3. Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
4. The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.

4.2. Stopping a Charge

1. Öncelikle şarj kablosunu elektrikli aracınızdan çıkarın.
2. Disconnect the charging cable from the charging station.
3. The charging station will return to a ready state (green indicator light).

4.3. Durum Göstergeleri

• Yeşil ışık: Ready for charging.
• Blue Light (or flashing green): Şarj işlemi devam ediyor.
• Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
• Işık Yok: Power off or system fault.

5. Bakım

5.1. Temizlik

Clean the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.

5.2. Muayene

Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

Garanti bilgileri ve teknik destek için lütfen resmi Hager web sitesine başvurun. website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.

Spare parts availability: Information not available.