Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign User Manual

Model: EDG 1 R EL M6

1. Giriş

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign. This edge-lit sign is designed for emergency egress lighting in commercial and institutional environments, ensuring clear visibility during power outagee.

The EDG 1 R EL M6 features a durable aluminum construction, energy-efficient LED illumination, and a reliable battery backup system. Adherence to these instructions will ensure proper function and compliance with safety standards.

2. Güvenlik Bilgileri

Tüm talimatları okuyunuz: Before beginning installation or maintenance, carefully read and understand all instructions provided in this manual.
Gücü kesin: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the unit. Failure to do so may result in electric shock or serious injury.
Kalifiye personel: Installation, servicing, and testing must be performed by qualified personnel in accordance with all national and local electrical codes and safety regulations.
UL 924 Uyumluluğu: This product is designed to meet UL 924 standards for emergency lighting and power equipment. Ensure all installations comply with these and other applicable standards.
Pil kullanımı: The unit contains a sealed, maintenance-free nickel-cadmium battery. Do not attempt to open or service the battery. Dispose of batteries according to local regulations.
Çevresel koşullar: Install in locations where ambient temperatures are within the specified operating range. Do not install near gas or electric heaters.

3. Paket İçeriği

Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun:

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign (Battery-Powered, Red)
Mounting Hardware (typically includes screws, anchors, and canopy)
Instruction Sheet / Wiring Diagram

4. Kurulum ve Kurulum

The EDG 1 R EL M6 is designed for surface mounting. Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight.

4.1 Montaj Seçenekleri

This unit supports various surface mounting configurations. Refer to the included wiring diagram for specific instructions on ceiling, wall, or end mounting.

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, top-down view.

Resim: Yukarıdan aşağıya view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, showing the brushed aluminum housing and clear acrylic panel with red 'EXIT' letters.

4.2 Elektrik Bağlantıları

Güç Kaynağı: The unit is dual voltage (120/277V). Connect the appropriate AC power supply wires to the fixture's input terminals as indicated in the wiring diagram.
Pil Bağlantısı: Ensure the internal battery is properly connected after wiring the AC power. The battery is typically pre-connected but may require a final plug-in during installation.
Başlangıç ücreti: After installation and power connection, allow the unit to charge for a minimum of 24 hours before conducting any tests. This ensures the nickel-cadmium battery reaches full capacity.

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, side view.

Resim: Yan view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, highlighting its slim profile and edge-lit design.

5. Kullanım Talimatları

The Lithonia Lighting EDG 1 R EL M6 operates automatically once properly installed and charged.

Normal Çalışma: When AC power is present, the LED 'EXIT' letters will be illuminated. The internal battery will continuously charge to maintain readiness for emergency operation.
Acil durum operasyonu: In the event of an AC power failure, the unit will automatically switch to battery power, illuminating the 'EXIT' letters for a minimum of 90 minutes.
Test Düğmesi: A test button is typically located on the side or bottom of the unit. Pressing this button simulates an AC power failure, allowing you to verify the emergency lighting function. The 'EXIT' letters should illuminate when the button is pressed and extinguish when released (assuming AC power is present).

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, front view.

Resim: Ön view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, clearly showing the red 'EXIT' letters.

6. Bakım

The EDG 1 R EL M6 is designed for low maintenance. However, regular checks are essential to ensure continued reliability.

Aylık Test: Press the test button for at least 30 seconds to ensure the emergency lights operate.
Yıllık Testler: Disconnect AC power to the unit for a full 90-minute discharge test. The unit should remain illuminated for the entire duration. Reconnect AC power after the test.
Temizlik: Clean the exterior surfaces and acrylic panel with a soft, damp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın. Temizlemeden önce elektriğin kesildiğinden emin olun.
Pil Değişimi: The nickel-cadmium battery is maintenance-free and has a long lifespan. If the unit fails to hold a charge or operate for the required 90 minutes during testing, the battery may need replacement by qualified service personnel.
NFPA Compliance: All life safety equipment, including emergency lighting for paths of egress, must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes.

7. Sorun Giderme

If your EDG 1 R EL M6 LED Emergency Exit Sign is not functioning as expected, refer to the following common issues and solutions:

Sorun	Olası Neden	Çözüm
'EXIT' letters do not illuminate during AC power failure.	Battery not charged or faulty; AC power not connected.	Ensure AC power is connected and allow 24 hours for initial charge. If problem persists, battery may need replacement.
'EXIT' letters do not illuminate when test button is pressed.	Battery not connected or faulty; unit not receiving AC power.	Verify AC power connection. Check battery connection. Allow 24 hours for charge.
Unit does not stay illuminated for 90 minutes during annual test.	Battery capacity reduced due to age or defect.	Battery needs replacement. Contact qualified service personnel.
'EXIT' letters are dim.	Low battery charge; dirty acrylic panel.	Allow unit to charge for 24 hours. Clean the acrylic panel.

For issues not listed above, or if troubleshooting steps do not resolve the problem, contact Lithonia Lighting customer support or a qualified electrician.

8. Özellikler

Detailed technical specifications for the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign:

Model Numarası: EDG 1 R EL M6
Parça Numarası: LTHEDG1RELM6
Üretici: Lithonia Aydınlatma
Boyutlar: Approximately 13 inches (Width) x 11.12 inches (Height)
Ürün Ağırlığı: 2.2 pound (1 Kilogram)
Renk: Red (letters)
Stil: Pil ile çalışan
Sona ermek: Fırçalanmış alüminyum
Malzeme: Aluminum (housing), Acrylic (panel)
Güç Kaynağı: AC (şarj için)
Cilttage: 120/277V (Dual Voltage)
Netage: 3 watt
Ampul Tipi: NEDEN OLMUŞ
Montaj Tipi: Surface Mount (Ceiling, Wall, End)
Sertifikasyon: UL Listeli
Pil: Sealed, maintenance-free Nickel-Cadmium
Emergency Operation Duration: en az 90 dakika
LED Solamp Hayat: 100,000 saate kadar
Letter Height: 6 inç
Stroke Width: 3/4 inç
ViewMesafe: 100 feet (UL 924 standard)

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign with dimensions: 13 inches wide, 8 inches high.

Image: Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign with key dimensions indicated.

9. Garanti ve Destek

For detailed warranty information, product registration, or technical support, please visit the official Lithonia Lighting webSite üzerinden satın alabilir veya müşteri hizmetleri departmanıyla iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.

Lithonia Lighting Customer Service: Lütfen ürün ambalajında veya resmi marka web sitesinde yer alan iletişim bilgilerine bakın. webalan.

	Lithonia Lighting ELT Serisi Endüstriyel Çelik Acil Durum Aydınlatması - Özellikler ve Sipariş Lithonia Lighting'in ELT16, ELT24, ELT36 ve ELT50 Endüstriyel Çelik Acil Durum Aydınlatma ünitelerine ait detaylı teknik özellikler, özellikler ve sipariş bilgileri. Elektrik, pil, montaj detayları ve garanti bilgileri de dahildir.
	Lithonia Lighting LRP/LRP2 LED Kenar Aydınlatmalı Acil Çıkış İşareti Kurulum ve Bakım Kılavuzu Lithonia Lighting LRP/LRP2 Serisi 120/277V LED Kenar Aydınlatmalı Acil Çıkış İşaretleri için DC flaşör ve sesli alarm özelliklerine sahip F, FA ve FI seçenekleri dahil kapsamlı kurulum, inceleme ve bakım talimatları.
	Lithonia Lighting LED Combo Exit & Emergency Light Installation Instructions Comprehensive installation, operation, and maintenance guide for Lithonia Lighting's LED Combo Exit & Emergency Light, covering safety, mounting procedures, wiring, and battery backup.
	Lithonia Lighting ECBRM Quantum Running Man LED Light Bar Combo Unit - Emergency Lighting Specification Detailed specifications for the Lithonia Lighting ECBRM Quantum Running Man LED Light Bar Combo Unit, an emergency lighting fixture designed for path of egress illumination and marking. Includes features, construction, electrical, battery, installation, listings, warranty, ordering information, and spacing guidelines.
	Lithonia Lighting LED Combo Exit & Emergency Light Installation Instructions (EMCSA00802) Detailed installation instructions for the Lithonia Lighting LED Combo Exit & Emergency Light (Model EMCSA00802 Rev. F). Includes safety warnings, mounting procedures for back, top, and side installations, wiring diagrams, and operation details.
	Lithonia LED Combo Exit & Emergency Light Installation Instructions Comprehensive installation guide for the Lithonia LED Combo Exit & Emergency Light, covering safety warnings, installation procedures for various mounting types, operation details, maintenance, and wiring diagrams.