giriiş
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your InSinkErator SS-200-27 2 HP Commercial Garbage Disposer. Please read this manual thoroughly before installation or operation and retain it for future reference.
Önemli Güvenlik Bilgileri
UYARI: Bu güvenlik talimatlarına uyulmaması ciddi yaralanmalara veya maddi hasara yol açabilir.
- Always disconnect power before servicing or installing the disposer.
- This appliance must be installed by a qualified professional in accordance with all local codes and ordinances.
- Do not put hands or utensils into the disposer while it is operating.
- Do not dispose of non-food items, glass, metal, plastic, or large bones.
- Elektrik çarpması riskini azaltmak için topraklamanın uygun olduğundan emin olun.
Kurulum ve Yükleme
Installation of the InSinkErator SS-200-27 commercial garbage disposer requires specialized knowledge and tools. It is strongly recommended that installation be performed by a licensed plumber or qualified service technician.
Kurulum Öncesi Kontrol Listesi:
- Tüm bileşenlerin mevcut ve hasarsız olduğunu doğrulayın.
- Ensure the installation location meets local plumbing and electrical codes.
- Confirm adequate space for the disposer and its connections.
- Have necessary tools and materials ready.
Genel Kurulum Adımları (Profesyonel Kurulum Önerilir):
- Montaj: Securely attach the disposer to the sink opening using the provided mounting assembly. Ensure a watertight seal.
- Sıhhi Tesisat Bağlantıları: Connect the disposer to the drain line. Ensure proper trap and venting according to local codes.
- Elektrik Tesisatı: Connect the disposer to a dedicated, properly grounded electrical circuit. This unit requires a 2 HP motor, so ensure the circuit can handle the load.
- Su Temini: Connect the cold water line to the disposer.
- Test: After installation, run cold water and test the disposer for leaks and proper operation.
Şekil 1: InSinkErator SS-200-27 2 HP Commercial Garbage Disposer. This image shows the stainless steel body of the disposer with its top mounting flange and the red reset button on the side.
Kullanım Talimatları
Follow these steps for safe and effective operation of your commercial garbage disposer:
- Soğuk suyu açın: Before activating the disposer, turn on a strong stream of cold water. This helps flush food waste and keeps the grinding chamber cool.
- Atık öğütücüsünü etkinleştirin: Öğütücünün şalterini açın.
- Gıda Atıklarını Besin Olarak Kullanın: Yiyecek artıklarını yavaş yavaş öğütücü açıklığına doldurun. Cihazı aşırı doldurmaktan kaçının.
- Su akışına devam edin: Allow the cold water to run for at least 15-20 seconds after the grinding stops to ensure all waste is flushed through the drain.
- Çöp öğütücüsünü kapatın: Öğütücünün şalterini kapatın.
- Suyu Kapatın: Soğuk suyu kapatın.
Do Not Dispose Of:
- Grease, fats, or oils (pour into a separate container and dispose of in trash).
- Fibrous materials like corn husks, artichokes, or onion skins in large quantities.
- Large bones, fruit pits, or hard shells.
- Non-food items such as plastic, metal, glass, or cleaning rags.
Bakım
Düzenli bakım, atık öğütücünüzün optimum performans göstermesini sağlar ve ömrünü uzatır.
- Günlük Temizlik: After each use, run cold water for 15-20 seconds to flush the grinding chamber.
- Derinlemesine Temizlik (Aylık): Grind a tray of ice cubes followed by citrus peels (lemon, orange) to clean the grinding elements and freshen the drain.
- Dış Temizlik: Dış yüzeyi reklamla silinamp bezle silin. Aşındırıcı temizleyiciler kullanmayın.
- Profesyonel Muayene: Schedule periodic professional inspections to ensure all components are functioning correctly and to address any potential issues.
Sorun giderme
Before attempting any repairs, always disconnect power to the disposer.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Öğütücü başlamıyor. | No power; tripped circuit breaker; jammed motor. | Check power supply. Reset circuit breaker. Press the red reset button on the bottom/side of the disposer. If jammed, turn off power, use a disposer wrench to free the impellers. |
| Öğütücü vızıldıyor ama öğütmüyor. | Sıkışmış öğütme plakası. | Turn off power. Use a disposer wrench (or hex key) in the center hole on the bottom of the disposer and turn it back and forth to free the jam. Remove the object with tongs. |
| Çöp öğütücüsünden sızıntı. | Loose connections; cracked housing. | Check and tighten all plumbing connections. If housing is cracked, professional repair or replacement is required. |
| Hoş olmayan kokular. | Food particles accumulated in grinding chamber or drain. | Grind ice cubes and citrus peels. Clean the splash guard. |
Bu çözümleri denedikten sonra sorunlar devam ederse, yetkili bir servis teknisyenine başvurun.
Özellikler
| Özellik | Detay |
|---|---|
| Marka | InSinkErator |
| Model Numarası | SS-200-27 |
| Beygir gücü | 2 beygir |
| Kurulum Türü | Solo |
| Başvuru | Reklam |
| ASIN | B00BMV987C |
| İlk Mevcut Tarih | 28 Şubat 2013 |
Garanti ve Destek
InSinkErator products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official InSinkErator webSite. Satın alma belgenizi garanti talepleriniz için saklayın.
For technical support, service, or to locate an authorized service center, please contact InSinkErator customer service or visit their official website. Contact information is typically provided in the product packaging or on the manufacturer's webalan.
