giriiş
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teka Baltic Sport Shower Set model 790026700. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Güvenlik Bilgileri
- Herhangi bir kurulum veya bakım çalışmasına başlamadan önce ana su kaynağını mutlaka kapatın.
- Sızıntıları önlemek için tüm bağlantıların güvenli olduğundan emin olun.
- Krom yüzeylerde aşındırıcı temizleyiciler veya sert kimyasallar kullanmayın, çünkü bu hasara neden olabilir.
- Kurulum sürecinin herhangi bir noktasında emin değilseniz, kalifiye bir tesisatçıya danışın.
Paket İçeriği
Kurulum işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Shower Set (including shower head, hose, and rail)
- Montaj Donanımı
- Kurulum Kılavuzu (bu belge)
Kurulum ve Yükleme
Follow these steps for proper installation of your Teka Baltic Sport Shower Set:
- Kurulum Alanını Hazırlayın: Turn off the main water supply. Clear the area where the shower set will be installed.
- Mount the Shower Rail: Position the shower rail on the wall at the desired height. Mark the drilling points for the mounting brackets. Drill holes and insert wall plugs. Secure the mounting brackets to the wall using the provided screws.
- Attach the Shower Rail: Slide the shower rail onto the mounted brackets and secure it according to the specific design of your rail.
- Connect the Shower Hose: Attach one end of the 175 cm braided steel hose to the shower mixer outlet (not included) and the other end to the shower head. Ensure all connections are hand-tightened, then use a wrench to gently tighten further, being careful not to overtighten.
- Place the Shower Head: Insert the shower head into the adjustable holder on the shower rail.
- Sızıntı Testi: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly until they stop.
Image 1: The complete Teka Baltic Sport Shower Set, including the shower rail, adjustable holder, and round shower head, ready for installation. This image illustrates the components that need to be assembled and mounted on the wall.
Kullanım Talimatları
The Teka Baltic Sport Shower Set is designed for ease of use:
- Adjusting Water Flow and Temperature: Use your existing shower mixer (not included) to control the water flow and temperature.
- Duş Başlığının Kullanımı: The round shower head features an anti-limescale system. Water sprays from multiple nozzles.
- Duş Başlığı Yüksekliğini Ayarlama: The shower head holder on the rail can be easily adjusted up or down to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image 2: A close-up front view of the Teka Baltic Sport round shower head, showcasing its multiple nozzles and anti-limescale design.
Resim 3: Bir taraf view of the Teka Baltic Sport shower head, highlighting its ergonomic handle and chrome finish.
Bakım
Regular cleaning and maintenance will ensure the longevity and appearance of your shower set:
- Krom Yüzeyin Temizlenmesi: Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Kireç Önleyici Sistem: The shower head is equipped with an anti-limescale system. Periodically rub the rubber nozzles on the shower head to dislodge any mineral deposits. For stubborn deposits, a solution of white vinegar and water can be used, but ensure it is rinsed off completely.
- Hortum Bakımı: Inspect the braided steel hose periodically for any signs of wear or damage. Replace if necessary.
Sorun giderme
Karşılaşabileceğiniz yaygın sorunlara yönelik çözümler şunlardır:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Duş başlığından gelen su basıncı düşük. | Clogged nozzles or mineral buildup. | Clean the shower head nozzles by rubbing them to remove limescale. If necessary, soak the shower head in a descaling solution. |
| Bağlantılardan su sızıyor | Gevşek bağlantılar veya aşınmış rondelalar. | Ensure all connections are tightened properly. Check and replace any worn rubber washers. |
| Shower head not staying in position | Holder mechanism is loose or worn. | Tighten the holder mechanism if possible. If worn, the holder may need replacement. |
Özellikler
| Özellik | Detay |
|---|---|
| Marka | Teka |
| Model Numarası | 790026700 |
| Renk | Krom |
| Bitiş Türü | Krom kaplamalı |
| Kol Sayısı | 1 (for shower mixer, not included) |
| Ürün Ağırlığı | 5.8 Kilogram |
| Hortum Uzunluğu | 175 cm (Braided Steel) |
| GTIN | 08413509203667 |
| Üretici | Teka |
Garanti ve Destek
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Teka webSite. Satın alma belgenizi herhangi bir garanti talebi için saklayın.
