Oxford Heaterz Premium Sport Heated Grips

Ürün Bittiview

The Oxford Heaterz Premium Sport Heated Grips are designed to enhance riding comfort by providing adjustable heat to your motorcycle handlebars. Featuring ergonomically engineered surface structures, these grips optimize riding performance with a soft, ultra-grippy diamond tread inspired by race grips for superior comfort and feedback.

Temel özellikler şunlardır:

• 5 heat settings for customizable warmth.
• Intelligent heat controller for precise temperature management.
• Designed to fit 22mm (0.86") handlebars.
• Adjustable length from 123mm (4.84") down to 114mm (4.48") for a tailored fit.
• Optimized tread pattern for enhanced grip.
• Weatherproof design, sealed for life, and a rainproof switch for durability.
• Basit kurulum süreci.
• Battery saving mode to prevent battery drain, drawing under 4A.

Image: Oxford Heaterz Premium Sport Heated Grips and Intelligent Heat Controller.

Paket İçeriği

Your Oxford Heaterz Premium Sport Heated Grips package should contain the following items:

• 2 x HotGrips (left and right)
• 1 x Intelligent Heat Control unit
• 1 x Metal bracket and fittings for mounting the heat controller
• 1 x Wiring loom with 5A fuse
• Kablo bağları
• Grip glue
• 1 x Instruction booklet and warranty form

Resim: Ayrıntılı view of all components included in the Oxford Heaterz Premium Sport Heated Grips package.

Kurulum ve Yükleme

Installation of the Oxford Heaterz Premium Sport Heated Grips is designed to be straightforward. Please follow these general steps. Refer to the included instruction booklet for detailed, model-specific guidance and safety warnings.

1. Hazırlık: Ensure your motorcycle is turned off and the battery is disconnected. Remove existing grips from the handlebars. Clean the handlebar surfaces thoroughly.
2. Grip Installation: The grips have a hard plastic inner shell. Apply the provided grip glue sparingly to the handlebar, particularly on the inner section, to avoid excess glue being pushed out. Quickly slide the new heated grips into place. Ensure the wire side of the grip faces downwards for optimal routing. For the throttle side, ensure there is sufficient play for full throttle rotation without binding the wire.
3. Kablolama: Route the wiring loom from the grips to the intelligent heat control unit, and then to the motorcycle's battery. It is recommended to connect the wiring to the battery first. The system includes an auto-shutoff feature to prevent battery drain if the grips are left on after the bike is powered off. Use the provided cable ties to secure all wiring neatly and safely, away from moving parts or heat sources.
4. Kontrol Cihazının Montajı: Mount the intelligent heat control unit using the provided metal bracket and fittings in a convenient and accessible location on your handlebars or fairing.
5. Son Kontroller: Reconnect the battery. Before riding, perform a thorough check to ensure all connections are secure, grips are firmly in place, and there is no interference with steering or controls.

Note: Some motorcycle throttle tubes may have ridges that need to be sanded down for proper fitment of the heated grip. The grip glue sets quickly, so plan your placement before application.

Kullanım Talimatları

The intelligent heat controller allows for precise temperature adjustment of your Oxford Heaterz grips.

Image: Close-up of the intelligent heat controller showing power and heat level buttons.

1. Güç Açma/Kapatma: To turn the grips on, press the '+' or '-' button. To turn them off, repeatedly press the '-' button until the lowest setting is reached, then press it one more time.
2. Isı Ayarlarının Düzenlenmesi: Use the '+' button to increase the heat level and the '-' button to decrease it. There are 5 distinct heat settings (30%, 40%, 50%, 75%, 100%) indicated by LED lights on the controller.
3. Pil Tasarruf Modu: The intelligent controller features a battery saving mode that automatically turns off the grips if the motorcycle's engine is not running, preventing battery drain.
4. Optimum Kullanım: For cold conditions, you may start at a higher setting to quickly warm the grips, then reduce the setting as your hands become comfortable. The grips provide consistent heat across both sides.

Bakım

The Oxford Heaterz Premium Sport Heated Grips are designed for durability and minimal maintenance.

• Temizlik: Clean the grips and controller with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the rubber or electronic components.
• Hava koşullarına dayanıklı tasarım: The grips and switch are designed to be weatherproof and sealed for life, requiring no special waterproofing maintenance.
• Kablolama Denetimi: Periodically inspect the wiring loom for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• Grip Integrity: Check the grips for any signs of loosening or damage. If the grips become loose, they may need to be re-secured or replaced.

Sorun giderme

If you encounter issues with your Oxford Heaterz Premium Sport Heated Grips, consider the following common troubleshooting steps:

• Grips Not Heating:
  • Check all electrical connections, ensuring they are secure and free from corrosion.
  • Verify the 5A fuse in the wiring loom is intact. Replace if blown.
  • Ensure the motorcycle's battery has sufficient charge. The battery saving mode will prevent operation if voltage çok düşük.
  • Inspect the wiring for any kinks or damage, especially near connectors or where it might be pinched.
• One Grip Not Heating:
  • This often indicates an issue with the wiring or connection specific to that grip. Check the individual connections for the non-heating grip.
  • Ensure the grip is properly seated and the internal heating elements are not damaged (though this is rare with sealed units).
• Denetleyici Yanıt Vermiyor:
  • Check the main power connection to the controller.
  • Ensure the motorcycle's ignition is on and the battery has adequate power.
• Grips Becoming Loose:
  • If grips become loose, they may need to be re-glued. Ensure the handlebar surface is clean and dry before re-applying a suitable grip adhesive.

If these steps do not resolve the issue, please contact Oxford customer support.

Özellikler

Image: Technical diagram illustrating the dimensions of the heated grips.

Garanti ve Destek

Your Oxford Heaterz Premium Sport Heated Grips come with a warranty. Please refer to the included instruction booklet and warranty form for specific details regarding warranty coverage, terms, and conditions.

For technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact Oxford customer support directly. Contact information can typically be found on the product packaging or the official Oxford Products webalan.

Çevrimiçi Kaynaklar: For additional information, product registration, or frequently asked questions, visit the official Oxford webalan: www.oxfordproducts.com