Fenton WPP16

Fenton WPP16 6.5-inch Woofer Instruction Manual

1. Giriş

Thank you for choosing the Fenton WPP16 6.5-inch Woofer. This manual provides essential information for the proper installation, operation, and maintenance of your new audio component. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

The Fenton WPP16 is a high-quality 6.5-inch (16cm) woofer designed for excellent bass reproduction. It is suitable for various applications, including HiFi speaker systems, car audio installations, or as a replacement driver for existing enclosures.

Fenton WPP16 6.5-inch Woofer front view

Resim 1: Ön view of the Fenton WPP16 6.5-inch Woofer, showcasing its polypropylene cone and rubber surround.

2. Güvenlik Talimatları

  • Elektriksel Güvenlik: Always disconnect power from any amplifier or audio system before installing or servicing the woofer. Improper wiring can cause damage to the woofer, amplifier, or pose an electrical hazard.
  • İşleme: Handle the woofer carefully. Avoid touching the cone or surround with sharp objects. Do not drop the woofer.
  • Empedans Eşleşmesi: Ensure the woofer's impedance (8 Ohms) is compatible with your amplifier's output specifications. Mismatched impedance can lead to amplifier overheating or damage.
  • Havalandırma: Ensure adequate ventilation around the woofer and its enclosure to prevent overheating, especially during prolonged high-power operation.
  • Ses Seviyeleri: Avoid operating the woofer at excessively high volume levels for extended periods, as this can cause permanent damage to the speaker.

3. Paket İçeriği

  • One (1) Fenton WPP16 6.5-inch Woofer

4. Ürün Özellikleri

The Fenton WPP16 woofer is engineered with the following key features:

  • Polipropilen Koni: Provides excellent rigidity and damping for accurate bass reproduction.
  • Rubber Suspension: Durable and flexible, allowing for extended cone excursion and improved low-frequency response.
  • Yüksek Güç Kullanımı: Capable of handling up to 175 Watts maximum power (85 Watts RMS).
  • Standart Empedans: 8 Ohms, compatible with a wide range of audio ampcankurtaranlar
  • Geniş Frekans Aralığı: Designed to reproduce frequencies from 35 Hz to 8 kHz.
  • Sağlam Yapı: Features a heat-resistant voice coil and a substantial 850g (30 oz) magnet for reliable performance.
Fenton WPP16 Woofer with key features listed

Image 2: The Fenton WPP16 Woofer highlighting its 6.5-inch polypropylene cone, 175W power handling, and 8 Ohm impedance.

5. Kurulum ve Kurulum

Proper installation is crucial for the performance and safety of your woofer. Follow these steps carefully:

5.1 Montaj

  1. Choose an Enclosure: The WPP16 is designed for use in a suitable speaker enclosure (e.g., sealed, ported, or bandpass). The enclosure's volume and tuning will significantly impact the woofer's performance. Consult speaker design resources for optimal enclosure parameters.
  2. Montaj deliğini hazırlayın: Cut a circular hole in your enclosure with a diameter of 145 mm (5.7 inç). Ensure the mounting surface is flat and rigid.
  3. Ölçüleri kontrol edin: Verify that the woofer's overall diameter (165 mm) and mounting depth (78 mm) fit your chosen location.
  4. Secure the Woofer: Place the woofer into the mounting hole. Align the mounting holes on the woofer frame with the pre-drilled holes in your enclosure. Use appropriate screws (not included) to secure the woofer firmly, ensuring an airtight seal. Do not overtighten.
Fenton WPP16 Woofer dimensions diagram

Image 3: Diagram illustrating the dimensions of the Fenton WPP16 Woofer, including overall diameter, mounting depth, and cutout diameter.

5.2 Kablolama

  1. Terminalleri Tanımlayın: The woofer has two terminals on the back. Typically, the wider terminal is positive (+) and the narrower one is negative (-). Refer to any markings on the woofer itself for confirmation.
  2. Hoparlör kablosunu bağlayın: Use high-quality speaker wire of appropriate gauge for your power levels and cable length. Connect the positive (+) terminal of the woofer to the positive (+) output of your amplifier. Connect the negative (-) terminal of the woofer to the negative (-) output of your ampcankurtaran.
  3. Kutupların doğru olduğundan emin olun: Sisteminizdeki tüm hoparlörlerde doğru kutupluluğu korumak, doğru ses üretimi ve faz hizalaması için çok önemlidir.
  4. Güvenli Bağlantılar: Ensure all connections are tight and free from short circuits.
Fenton WPP16 Woofer back view terminalleri gösteriyor

Resim 4: Arka view of the Fenton WPP16 Woofer, showing the speaker terminals for wiring connections.

6. Operating the Woofer

Once installed and wired correctly, the Fenton WPP16 woofer operates as part of your audio system. Ensure your amplifier is powered on and set to a low volume level before playing audio. Gradually increase the volume to your desired listening level. For optimal performance, consider using a crossover network to direct only low frequencies to the woofer, preventing it from attempting to reproduce frequencies outside its intended range.

7. Bakım

  • Temizlik: Use a soft, dry cloth to gently wipe dust from the cone and frame. Avoid using harsh chemicals or abrasive materials.
  • Denetleme: Periodically inspect the woofer's cone, surround, and dust cap for any signs of damage or wear.
  • Çevre: Keep the woofer away from direct sunlight, extreme temperatures, and excessive moisture.

8. Sorun Giderme

If you encounter issues with your Fenton WPP16 woofer, refer to the following common problems and solutions:

SorunOlası NedenÇözüm
No sound from woofer
  • Gevşek veya yanlış kablolama
  • Ampyükseltici kapalı veya arızalı
  • Çapraz bağlantı ayarları yanlış
  • Tüm hoparlör kablosu bağlantılarının sıkı ve doğru kutuplu olup olmadığını kontrol edin.
  • Emin olmak ampLifier açık ve düzgün çalışıyor.
  • Verify crossover settings are allowing low frequencies to reach the woofer.
Bozuk ses
  • Overpowering the woofer
  • Uygunsuz muhafaza
  • Damaged woofer
  • Ampkesici kırpma
  • Ses seviyesini azaltın veya amplifer kazancı.
  • Ensure the woofer is installed in an appropriate enclosure.
  • Inspect the cone and surround for physical damage.
  • Kontrol etmek ampSes seviyesinde bozulma (kopma) belirtileri için yükselticiyi kontrol edin.
Zayıf veya bulanık bas
  • Yanlış polarite
  • Yanlış kasa ayarı
  • Yetersiz amplif gücü
  • Verify correct polarity for all speakers in the system.
  • Review enclosure design and tuning.
  • Emin olmak amplifier provides adequate power for the woofer.

9. Özellikler

Detailed technical specifications for the Fenton WPP16 6.5-inch Woofer:

ŞartnameDeğer
Hoparlör TipiWoofer
Model NumarasıWPP16
Hoparlör Boyutu6.5 inç (16 cm)
Koni MalzemesiPolipropilen
Surround MalzemeLastik
Maksimum Güç Çıkışı175 Watt
RMS Güç Çıkışı85 Watt
Empedans8 Ohm
Frekans Tepkisi35 Hz - 8 kHz
Mıknatıs Ağırlığı850 gr (30 oz)
SPL @ 1W/1m89 dB
Ses Bobini Çapı2 inç (5 cm)
Genel Çap165 mm
Mounting Cutout Diameter145 mm
Kurulum Derinliği78 mm
Ürün Boyutları (U x G x Y)19x19x11 cm
Ürün Ağırlığı2.15 Kilogram
Önerilen KullanımHiFi audio systems, home cinema, music studios
SPL vs Frequency Response Graph for Fenton WPP16 Woofer

Image 5: SPL vs Frequency Response graph, illustrating the acoustic performance characteristics of the Fenton WPP16 Woofer.

10. Garanti ve Destek

The Fenton WPP16 Woofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please reach out to the Fenton customer service department or your authorized dealer.

İlgili Belgeler - WPP16

Önview Fenton SHFS Serisi Aktif Subwoofer Kullanım Kılavuzu
Fenton SHFS Serisi Aktif Subwoofer için kurulum, çalıştırma, güvenlik önlemleri ve teknik özellikler dahil olmak üzere kapsamlı kullanım kılavuzu. Birden fazla dilde mevcuttur.
Önview Fenton SHFS-SERIES Aktif Subwoofer Kullanım Kılavuzu
Fenton SHFS-SERIES Aktif Subwoofer için kapsamlı kullanım kılavuzu; güvenlik önlemleri, kurulum, arka panel kontrolleri ve teknik özellikler hakkında bilgi içerir. Fenton subwoofer'ınızı güvenli bir şekilde nasıl kuracağınızı ve çalıştıracağınızı öğrenin.
Önview Fenton SHFS12 Aktif Subwoofer Kullanım Kılavuzu ve Güvenlik Rehberi
Fenton SHFS12 Aktif Subwoofer için kurulum, çalıştırma, güvenlik önlemleri, bağlantılar ve teknik özellikler dahil olmak üzere kapsamlı kullanım kılavuzu. Çok dilli güvenlik bilgileri içerir.
Önview Fenton FT210LED Taşınabilir Sistem 2x10" Kullanım Kılavuzu
Fenton FT210LED Taşınabilir Sistem 2x10" için kullanım kılavuzu. Güvenlik, kutudan çıkarma, kontroller, uzaktan çalıştırma, Bluetooth bağlantısı, kayıt özellikleri ve teknik özellikler konularını kapsamaktadır. Fenton ses sisteminizi nasıl kuracağınızı ve kullanacağınızı öğrenin.
Önview Fenton AV360BT Amplifier USB/SD/BT Kullanım Kılavuzu
Bu kılavuz Fenton AV360BT için kapsamlı talimatlar sağlar AmpKurulum, çalıştırma, güvenlik önlemleri ve USB, SD ve Bluetooth bağlantısı gibi özellikleri kapsayan bir eğitim.
Önview Fenton FT10LED Taşınabilir Sistem Kullanım Kılavuzu
Bu kılavuz, Fenton FT10LED Taşınabilir Sistem için ambalaj açma, güç kaynağı, kontroller, bağlantılar ve teknik özellikleri kapsayan talimatlar sağlar. Güvenlik önlemleri ve garanti bilgilerini de içerir.