DISH DISH211 4 Cihazlı Evrensel Uzaktan Kumanda Kullanım Kılavuzu

giriiş

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DISH DISH211 4-Device Universal Remote. Designed for ease of use, this remote supports DISH TV receivers and can control up to four different devices, including TVs and other entertainment systems. Its ability to learn commands from original remotes makes it a versatile replacement.

Figure 1: The DISH DISH211 4-Device Universal Remote, showcasing ergonomik tasarımı ve tuş dizilimi.

Kurmak

1. Pil Kurulumu

The DISH211 remote requires two (2) AA batteries for operation. To install:

1. Uzaktan kumandanın arkasındaki pil bölmesini bulun.
2. Pil kapağını aşağı doğru kaydırın ve açmak için yukarı kaldırın.
3. İki adet AA pil takın ve pozitif (+) ve negatif (-) kutupların bölmenin içindeki göstergelerle hizalandığından emin olun.
4. Replace the battery cover by sliding it upwards until it clicks into place.

2. Device Pairing and Programming

The DISH211 remote can be programmed to control your DISH receiver and other devices. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication, depending on your receiver model.

Figure 2: Cover of the official DISH Remote User Guide, which provides detailed programming instructions.

For DISH Receiver Pairing (UHF/IR):

Some DISH receivers may require setting the remote's address and communication type (UHF or IR). A small switch near the battery compartment may allow selection between UHF and IR modes. Ensure this switch is set correctly for your receiver type.

To address the remote to your receiver:

1. Basın Sistem Bilgisi button on the front of your receiver to access the system information screen.
2. Basılı tutun DOYGUNLUK button on the remote until all mode lights illuminate.
3. Enter a number between 1-15 on the remote keypad. This number corresponds to the TV-2 UHF address displayed on your receiver's screen.
4. Basın # (pound) button once.
5. Basın Kayıt düğmesine üç kez basın.
6. Seçme Tamamlamak on the system info screen and test the remote's functionality.

For Other Devices (TV, DVD, AUX):

The remote has a large code library and can learn commands from your original remotes. Refer to the official DISH remote user guide (often included with the product or available online) for specific programming codes and learning instructions for various brands and device types.

Figure 3: The back of the DISH remote packaging, indicating compatible DISH receiver models for both IR and IR/UHF configurations.

Kullanım Talimatları

The DISH211 remote is designed for intuitive control of your entertainment system. It features backlit active MODE keys for visibility in low light conditions and dedicated DVR controls.

1. Mod Seçimi

Press the desired mode button (e.g., DOYGUNLUK for DISH receiver, TV for television, DVD for DVD player, Yardımcı for auxiliary device) at the top of the remote to select the device you wish to control. The selected mode button will illuminate.

2. Temel Kontroller

• Güç: Basın GÜÇ seçili cihazı açma veya kapatma düğmesi.
• Hacim: Kullanın SES YUKARI/AŞAĞI buttons to adjust the audio level of your television.
• Kanal: Kullanın KANAL YUKARI/AŞAĞI buttons to change channels on your DISH receiver or television.
• Sesini kapatmak: Basın SESSİZ sesi kapatmak için düğme.
• Giriş: Basın GİRİŞ button to cycle through video inputs on your television.

3. DVR Controls

The remote includes dedicated buttons for DVR functionality:

• Kayıt: Mevcut programın kaydını başlatır.
• Oynat/Duraklat: Starts or pauses playback of recorded content or live TV.
• Durdur: Oynatmayı durdurur.
• Geri Sarma/Hızlı İleri Sarma: Controls playback speed and direction.
• Skip Forward (DISH Skip Forward): Allows quick skipping through commercials or segments.
• Geriye Atla: Skips backward in recorded content.

Şekil 4: Yakın çekim view of the DISH DISH211 remote, highlighting the central navigation and DVR control buttons.

Bakım

1. Pil Değişimi

When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

2. Temizlik

Uzaktan kumandanızı temizlemek için yüzeyini yumuşak, kuru bir bezle nazikçe silin. İnatçı kirler için hafifçe kurulayın.ampen the cloth with water or a mild, non-abrasive cleaner. Avoid using excessive liquid or harsh chemicals, as these can damage the remote's electronics or finish.

Sorun giderme

Uzaktan Kumanda Yanıt Vermiyor

• Pilleri Kontrol Edin: Pillerin doğru şekilde takıldığından ve yeterli şarja sahip olduğundan emin olun. Gerekirse değiştirin.
• Line of Sight (IR): If using IR mode, ensure there is a clear line of sight between the remote and the device's IR receiver. Obstructions can block the signal.
• Mod Seçimi: Verify that the correct mode button (e.g., SAT, TV) is selected for the device you are trying to control.
• Remote Address/UHF-IR Switch: For DISH receivers, confirm the remote's address is correctly set and the UHF/IR switch (if present) matches your receiver's configuration. Incorrect settings can prevent communication.

Aralıklı İşlevsellik

• Parazit yapmak: Other electronic devices or strong light sources (like plasma TV IR interference) can sometimes interfere with IR signals. Try operating the remote from a different angle or location.
• DVR Directory Update: If experiencing lag or unresponsiveness with DVR functions, ensure your DVR's directory is updated. Consult your DISH receiver's manual for instructions on updating its software or directory.

Düğmeler Çalışmıyor

• Uzaktan Kumandayı Temizle: Dirt or debris under buttons can cause them to stick or become unresponsive. Clean the remote as described in the Maintenance section.
• Reprogram: If specific buttons for a device are not working, the remote may need to be reprogrammed for that device.

Özellikler

Garanti ve Destek

Garanti Bilgileri

The DISH DISH211 Universal Remote typically comes with a Sınırlı 90 Günlük Garanti. Please refer to the documentation enclosed with your product for specific terms, conditions, and details regarding warranty claims.

Müşteri Desteği

For further assistance with programming, troubleshooting, or general inquiries, it is recommended to consult the official DISH Network support resources. This may include their website, online user guides, or customer service contact information. The manufacturer of this product is Audiovox Accessories Corporation.