Deca 300300 Matic 116 Traditional Electronic Battery Charger User Manual

1. Giriş

This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Güvenlik Bilgileri

Always observe the following safety precautions when using the battery charger:

• Elektriksel Güvenlik: Ensure the charger is connected to a grounded outlet. Do not operate the charger with damaged cords or plugs. Avoid contact with water or wet surfaces.
• Patlayıcı Gazlar: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
• Göz ve Cilt Koruması: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
• Çocuklar ve Yetkisiz Kişiler: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
• Pil Uyumluluğu: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltagee.
• Havalandırma: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
• Bağlantıyı Kesme: Always disconnect the AC power from the charger before disconnecting the battery clamps.

3. Ürün Bittiview

The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.

3.1. Şarj Cihazı Bileşenleri

Şekil 1: Ön view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.

The front panel includes indicator lights to show the charging status:

• Kırmızı LED: Indicates an error, such as reverse polarity connection or a faulty battery.
• Yellow LED (CHARGE): Pil aktif olarak şarj olurken yanar.
• Green LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.

4. Kurulum

Follow these steps to set up your Deca 300300 Matic 116 charger:

1. Hazırlık: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
2. Havalandırma: Place the battery and charger in a well-ventilated area.
3. Cl'yi bağlayınamps:
   • Bağlan kırmızı (+) clamp için pozitif (+) terminal pilin.
   • Bağlan siyah (-) clamp için negatif (-) terminal pilin.

   Önemli: Ensure correct polarity. Reverse polarity will trigger the red error LED.
4. Güce Bağlanın: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.

5. Kullanım Talimatları

Once the charger is set up and connected, it will automatically begin the charging process:

1. Şarjı Başlatın: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
2. Monitör Şarjı: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
3. Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
4. Bağlantıyı Kesme:
   • Öncelikle şarj cihazınızın fişini prizden çekin.
   • Next, disconnect the black (-) clamp akünün negatif terminalinden.
   • Finally, disconnect the red (+) clamp akünün pozitif terminalinden.

6. Bakım

Düzenli bakım, şarj cihazınızın uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar:

• Temizlik: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp bez. Sert kimyasallar veya solventler kullanmayın.
• Kablo ve Clamp Denetleme: Periodically inspect the power cord, charging cables, and clampHerhangi bir hasar, yıpranma veya korozyon belirtisi olup olmadığını kontrol edin. Hasarlı bileşenleri hemen değiştirin.
• Depolamak: Şarj cihazını kullanılmadığı zamanlarda serin ve kuru bir yerde saklayın. Doğrudan güneş ışığından, nemden ve aşırı sıcaklıklardan uzak tutun.

7. Sorun Giderme

If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:

8. Özellikler

Key technical specifications for the Deca 300300 Matic 116 charger:

• Marka: On yıl
• Model Numarası: 300300
• Güç Kaynağı: 1ph - 230 V - 50/60 Hz
• Giriş Voltage: 230 Volt (AC)
• Pil Hacmitage: 12V
• Average Charging Current: 4A
• Uyumlu Pil Tipleri: Lead-acid (wet, AGM, gel)
• Pil Kapasite Aralığı: 5 Ah (minimum) to 90 Ah (maximum)
• Fiş Tipi: CEE 7/16 Europlug
• Üretici: Deca S.P.A.

9. Garanti ve Destek

Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.