Klipsch R-5650-S II In-Wall Speaker User Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the Klipsch R-5650-S II In-Wall Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read these instructions thoroughly before beginning installation or use to ensure optimal performance and safety.

Temel Özellikler:

• Dual 1-inch (2.54cm) Titanium diaphragm compression driver mated to a pivoting 90° x 90° square Tractrix Horn.
• 6.5-inch Cerametallic cone woofer for robust bass response.
• Two vertically stacked Tractrix Horn-loaded tweeters designed to enhance surround sound effects.
• Horn-loaded technology engineered to increase acoustic output and reduce distortion.
• IR receiver knock out for integration with remote control systems.

2. Güvenlik Talimatları

Always observe the following safety precautions to prevent damage to the speaker or injury to yourself:

• Talimatları okuyun: Ürün çalıştırılmadan önce tüm güvenlik ve çalıştırma talimatları okunmalıdır.
• Talimatları Saklayın: Güvenlik ve kullanım talimatları ileride başvurmak üzere saklanmalıdır.
• Uyarıları Dikkate Alın: Ürün üzerinde ve kullanım kılavuzunda yer alan tüm uyarılara mutlaka uyulmalıdır.
• Kurulum: Installation should only be performed by qualified personnel. Ensure the mounting surface can support the speaker's weight.
• Kablolama: Ensure all wiring is correctly connected and insulated to prevent short circuits or electrical hazards. Turn off power to the ampBağlantıları yapmadan önce lifier.
• Nem: This speaker is not waterproof. Do not expose it to water or excessive moisture.
• Temizlik: Unplug the product from the amplifier before cleaning. Use a dry cloth only.

3. Paket İçeriği

The Klipsch R-5650-S II In-Wall Speaker package typically includes:

• One (1) Klipsch R-5650-S II In-Wall Speaker
• Installation Template (usually printed on the packaging)

Note: Additional tools and wiring are required for installation and are not included.

4. Kurulum ve Kurulum

Proper installation is crucial for optimal sound performance and speaker longevity. Consult a professional installer if you are unsure about any steps.

4.1 Konuşmacı Yerleştirme Planlaması

For surround sound applications, position the R-5650-S II speakers on the side or rear walls, typically at or slightly above ear level when seated. The unique horn array allows for flexible placement while maintaining an enveloping sound field.

4.2 Duvar Hazırlığı

1. Saplamaları Bul: Use a stud finder to locate wall studs and avoid them when choosing your mounting location. Ensure there are no electrical wires or plumbing in the desired area.
2. Trace Cutout: Use the provided cutout template to trace the opening on the wall.
3. Kesim Açılışı: Carefully cut the opening in the drywall using a drywall saw.

4.3 Kablo Bağlantıları

Herhangi bir bağlantı kurmadan önce, şunlardan emin olun: amplifier or receiver is turned off and unplugged from the power outlet.

1. Run speaker wire (minimum 16-gauge, heavier for longer runs) from your ampAsansörü duvardaki açıklığa getirin.
2. Hoparlör kablolarının uçlarından yaklaşık 1/2 inç (12 mm) kadar yalıtımı soyun.
3. Hoparlörün pozitif (+) terminalini hoparlörün pozitif (+) terminaline bağlayın. amplifier. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.

Şekil 1: Dahili view of the Klipsch R-5650-S II In-Wall Speaker, showing the woofer, dual tweeters, and crossover components.

4.4 Hoparlörün Montajı

1. Hoparlörü dikkatlice duvardaki açıklığa yerleştirin.
2. Tighten the dog-leg mounting clamps (usually by turning screws on the front baffle) until the speaker is securely fastened to the wall. Do not overtighten.
3. Attach the magnetic grille to the speaker baffle. The grille is designed to snap into place.

5. Kullanım Talimatları

Once installed and connected, your Klipsch R-5650-S II In-Wall Speaker is ready for use.

1. Tüm bağlantıların güvenli olduğundan emin olun.
2. Takın ve gücünüzü açın amplifier veya alıcı.
3. Select the appropriate input source on your ampcankurtaran.
4. Start playback at a low volume and gradually increase it to your desired listening level.

The pivoting Tractrix Horn allows you to direct the high-frequency sound towards the primary listening area for optimized sound imaging.

6. Bakım

Your Klipsch R-5650-S II In-Wall Speaker requires minimal maintenance.

• Temizlik: Use a soft, dry cloth to gently wipe the speaker grille and frame. Avoid using abrasive cleaners, solvents, or excessive moisture.
• Izgara Bakımı: The magnetic grille can be removed for cleaning if necessary. Handle with care to avoid bending or damaging it.
• Denetleme: Periodically check speaker wire connections to ensure they remain secure.

7. Sorun Giderme

If you encounter issues with your speaker, refer to the following common troubleshooting steps:

8. Özellikler

9. Garanti Bilgileri

The Klipsch R-5650-S II In-Wall Speaker comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Klipsch webSatın alma işleminize dahil olan garanti belgesini veya web sitesini ziyaret edin. Garanti talepleriniz için satın alma belgenizi saklayın.

10. Destek

Daha fazla yardım, teknik destek veya view additional product information, please visit the official Klipsch webalan:

www.klipsch.com