TS-20D Under Desk Push Button DPDT Alternate Action User Manual

giriiş

The Alarm Controls TS-20D is a robust under-desk push button designed for various control applications requiring a Double Pole Double Throw (DPDT) alternate action switch. This device is ideal for discreet installation, providing reliable latching contact closure for security, access control, or industrial automation systems.

Güvenlik Bilgileri

Please read and understand all instructions before installing or operating the TS-20D. Failure to follow these instructions may result in damage to the device, property, or personal injury.

Elektriksel Güvenlik: Installation should only be performed by qualified personnel. Disconnect all power to the circuit before wiring.
Montaj: Ensure the mounting surface is stable and can support the device securely.
Kullanım Amacı: Use this product only for its intended purpose as a control switch.
Çevresel Koşullar: Cihazı aşırı sıcaklıklara, neme veya aşındırıcı ortamlara maruz bırakmayın.

Paket İçeriği

Kuruluma başlamadan önce tüm öğelerin mevcut olduğundan emin olun:

1 x TS-20D Under Desk Push Button
Mounting Screws (typically included, but may vary)
Installation Template (if applicable, not specified but common)

Ürün Bittiview

Figure 1: Alarm Controls TS-20D Under Desk Push Button. This image shows the compact design of the push button, typically featuring a durable casing and the push button mechanism itself, designed for discreet mounting.

The TS-20D is an alternate action (latching) push button switch. This means that when the button is pressed, it latches into the "ON" position, and remains there until pressed again to return to the "OFF" position. It features Double Pole Double Throw (DPDT) contacts, providing two independent sets of Normally Open (NO) and Normally Closed (NC) contacts, allowing for versatile wiring configurations.

Butona basınız: The primary interface for activation.
Mounting Flange/Bracket: For secure installation under a desk or similar surface.
Terminal Bloğu: For electrical connections (typically screw terminals).

Kurulum ve Yükleme

Follow these steps for proper installation of the TS-20D:

Montaj Konumunu Seçin: Select a discreet and secure location under a desk, counter, or similar surface. Ensure there is sufficient space for the button and wiring, and that the surface material can hold the mounting screws.
Kablolamayı Hazırlayın: Disconnect all power to the circuit where the TS-20D will be connected. Identify the wires for your application (e.g., power, control signal, common).
Düğmeyi takın:
- Position the TS-20D in the desired location.
- Mark the screw hole locations using a pencil.
- Drill pilot holes if necessary, appropriate for the mounting screws and surface material.
- Secure the TS-20D using the provided mounting screws. Do not overtighten.
Wire the Contacts: The TS-20D features DPDT contacts. Refer to the wiring diagram specific to your application.
A DPDT switch has 6 terminals: two common (COM), two normally open (NO), and two normally closed (NC). When the button is in its default (unpressed) state, COM is connected to NC. When pressed, COM connects to NO.
- Connect your input signal to the Common (COM) terminals.
- Connect your output/controlled device to either the Normally Open (NO) or Normally Closed (NC) terminals, depending on whether you want the circuit to be active when the button is pressed (NO) or released (NC).
- Tüm bağlantıların güvenli ve yalıtılmış olduğundan emin olun.
Test İşlemi: Once wiring is complete and secure, reapply power to the circuit. Test the button's functionality to ensure it operates as expected for your application.

Kullanım Talimatları

The TS-20D is an alternate action (latching) push button. Its operation is straightforward:

Etkinleştirmek: Press the button firmly. The button will click and remain in the depressed position, changing the state of its DPDT contacts.
Devre Dışı Bırakmak için: Press the button firmly again. The button will click and return to its original extended position, reverting the state of its DPDT contacts.

The specific action (e.g., locking/unlocking a door, activating/deactivating an alarm) depends on how the DPDT contacts are wired into your system.

Bakım

The TS-20D is designed for long-term, reliable operation with minimal maintenance.

Temizlik: If necessary, gently wipe the button and casinYumuşak ve kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
Denetleme: Periodically check the mounting screws for tightness and the wiring connections for security.
Engellemelerden Kaçının: Ensure no objects obstruct the button's movement.

Sorun giderme

Sorun	Olası Neden	Çözüm
Button does not latch/unlatch	İç mekanizmada sorun veya tıkanıklık var.	Ensure no physical obstruction. If issue persists, the unit may be faulty and require replacement.
Cihaz düğmeye basıldığında yanıt vermiyor	Incorrect wiring, loose connections, or no power to the controlled device.	Verify all wiring connections are secure and correct according to your system's diagram. Check power supply to the controlled device.
Düğme gevşek veya sallanıyor gibi hissediliyor.	Gevşek montaj vidaları.	Tighten mounting screws. Do not overtighten.

Özellikler

Modeli: TS-20D
Tip: Under Desk Push Button
Aksiyon: Alternate Action (Latching)
İletişim Yapılandırması: DPDT (Çift Direkli Çift Atış)
Üretici: ALARM KONTROLLERİ
ASIN: B005S3GPLC
İlk Mevcut Tarih: 3 Ekim 2011
Note: Specific electrical ratings (e.g., voltage, current) are not provided in the product data. Refer to the product packaging or manufacturer's official datasheet for detailed electrical specifications.

Garanti ve Destek

For warranty information, technical support, or service inquiries, please contact Alarm Controls directly or refer to their official webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.

Alarm Controls Contact Information:

Webalan: www.alarmcontrols.com (Not: Bu bir yer tutucudur URL, please verify the actual manufacturer webdestek sitesi.)
Müşteri Hizmetleri: Üreticinin talimatlarına bakın webİletişim numaraları veya e-posta desteği için site.

	TS-27 Request to Exit Station - ALARM CONTROLS Access Control Detailed information on the ALARM CONTROLS TS-27 Request to Exit Station, featuring a large mushroom push button, stainless steel finish, and options for timed output. Specifications include UL 294 and CSA certifications.
	TS-18, TS-19, TS-20 Under Desk Door Release Alarm Controls TS-18, TS-19, and TS-20 are push button controlled under desk/counter door releases for remote control of doors and access controls. Ideal for front desk and reception or hard to wire areas requiring discreet control of locking devices.
	TS-12, TS-13 Vandal Resistant Request to Exit Station \| Alarm Controls Alarm Controls TS-12 and TS-13 are vandal-resistant request-to-exit stations designed for commercial and industrial applications, offering secure egress with a durable push button and optional timer relay.
	TS-32 Latching Panic Station - Alarm Controls Product Overview Detailed specifications and features for the Alarm Controls TS-32 Latching Panic Station, a single gang emergency door release with a red mushroom button.
	EB Series Request to Exit Egress Stations - Alarm Controls The EB Series from Alarm Controls offers single-gang request-to-exit egress stations with momentary push-button switches. These stations remain active as long as the button is depressed and feature compatibility with most systems. Key features include a stainless steel wall plate, a 1-1/2" red mushroom button, and a screened "EXIT" plate. Options for finishes, illumination (LED in various voltages), guard rings, and lift-up covers are available. Specifications include UL and CSA certification, contacts rated 10A at 35 VDC or 120 VAC, screw terminal connections, and a switch depth of 2-1/2". The operating temperature range is -13F to +158F. The document also provides a table for ordering different configurations.
	Alarm Controls SC628 Sonalert Buzzer and PA100 Piezo Buzzer Specifications Detailed specifications for Alarm Controls SC628 Sonalert Buzzer and PA100 Piezo Buzzer, including features, mounting options, and electrical requirements.

Alarm Controls TS-20D