giriiş
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Güvenlik Bilgileri
- Cihazı her zaman güvenli bir şekilde kullanın.
- Cihazı aşırı sıcaklıklara veya neme maruz bırakmayın.
- Çocukların erişemeyeceği yerde saklayınız.
- Pilleri yerel düzenlemelere uygun şekilde atın.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Paket İçeriği
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Depolama Kasası
- Kullanım Kılavuzu (bu belge)
Note: A 9V battery is required for operation and is sold separately.
Kurulum: Pil Kurulumu
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- Bölmeyi açmak için kapağı kaydırın veya açın.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Pil bölmesi kapağını güvenli bir şekilde yerine takın.
- Cihazınız artık kullanıma hazırdır.
Kullanım Talimatları
Açma/Kapatma
- To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- To turn the detector KAPALI, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Hassasiyet Azaltma
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Düşük Pil Uyarısı
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Özellikler
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Düşük pil uyarısı.
- Comes with a handy carrying case.
Bakım
- Temizlik: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Depolamak: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Pil: Remove the battery if the device will not be used for an extended period to prevent leakage and damage.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Detector does not turn on. | Pil bitmiş veya yanlış takılmış. | Check battery polarity. Replace with a fresh 9V battery. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
Özellikler
| Marka | Cen-Tech |
| Model Numarası | 94138 |
| Güç Kaynağı | 9V Pil (dahil değildir) |
| Algılama Türü | Metal |
| Wand Size | 6 inç |
| Uyarılar | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Özel Özellikler | 50% Sensitivity Reduction Button |
| Boyutlar | 16.5 x 5 x 2 inç |
| Ürün Ağırlığı | 1.45 pound |
| Malzeme | Wood, Metal (referring to detected materials) |
| Uluslararası Koruma Derecelendirmesi | IP54 |
Garanti ve Destek
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech website. Herhangi bir garanti talebi için satın alma belgeniz olarak satın alma makbuzunuzu saklayın.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
