1. Ürün Bittiview
The Nice Mindy TT1N is a control logic unit designed for the precise control of 230V motors used in applications such as blinds and roller shutters. This unit features an integrated radio receiver, simplifying installation and programming, and offers compatibility with various Nice remote controls and external sensors.
Temel Özellikler:
- Controls motors up to 500 W.
- Stores up to 30 stations (remote controls).
- Adjustable operating time from 4 seconds to 4 minutes.
- Kompakt boyutlar: 98 x 26 x 20 mm.
- Manufactured in Italy.
Figure 1: Nice Mindy TT1N Control Logic Unit. This image shows the compact white control unit with two white cables extending from one end. The unit has clear labeling for electrical connections and product specifications, including "Nice TT1N", "230V 50Hz", "Imax = 2,2A", "Pmax = 500W/400VA", and "IP55". A wiring diagram is also visible on the unit's surface.
2. Kurulum ve Kurulum
The Nice Mindy TT1N is designed for simple installation and programming. Ensure all power is disconnected before proceeding with any wiring.
2.1. Kablolama Şeması
Refer to the diagram printed on the unit for correct electrical connections. The unit is designed for 230V 50Hz power supply.
Şekil 2: Ayrıntılı view of the Nice Mindy TT1N wiring diagram. The diagram shows terminals for motor connection (M, COM, Ground) and power supply (L, N). Numbered terminals (1-7) are also visible, indicating connections for control inputs and accessories. This diagram is crucial for proper installation.
- L (Çizgi) Ve N (Nötr): Connect to the 230V AC power supply.
- M (Motor) Ve COM (Ortak): Connect to the motor's power input.
- Zemin Sembolü: Connect to the electrical ground.
- 1-7 arası terminaller: These terminals are used for various control inputs and accessories, such as remote control programming and external sensor connections. Consult the full product manual for specific functions of each terminal.
2.2. Uzaktan Kumandaların Programlanması
The unit features an integrated 433 MHz radio receiver. It is compatible with Nice Way, Nice Ergo, Nice Plano, and Nice Flor-S remote controls. Refer to your remote control's manual for specific pairing instructions. Generally, programming involves pressing a button on the control unit and then a button on the remote control to establish communication.
2.3. Sensor Association
The TT1N can be associated with external sun, wind, and rain sensors (not supplied). These sensors allow for automated operation of the motor based on environmental conditions. Consult the sensor's manual and the TT1N's detailed programming guide for integration steps.
3. Kullanım Talimatları
Once installed and programmed, the Nice Mindy TT1N allows for convenient control of your motor.
3.1. Temel İşlem
Use your paired Nice remote control to operate the connected motor. Typically, there are buttons for 'Up', 'Down', and 'Stop'.
- Basın 'Up' button to raise the blind/shutter.
- Basın 'Down' button to lower the blind/shutter.
- Basın 'Stop' button to halt movement at any point.
3.2. Automatic Operation (with Sensors)
If external sensors are connected and configured, the system can operate automatically:
- Sun Sensor: May automatically lower blinds/shutters when intense sunlight is detected.
- Rüzgar Sensörü: May automatically raise blinds/shutters to protect them during high winds.
- Yağmur sensörü: May automatically close windows or retract awnings during rain.
4. Bakım
The Nice Mindy TT1N is designed for long-term reliability and requires minimal maintenance.
- Temizlik: Cihazın dış yüzeyini periyodik olarak yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Denetleme: Annually inspect wiring connections to ensure they are secure and free from damage.
- Çevre Koruma: Ensure the unit remains within its specified IP55 rating environment, protected from excessive dust and water jets.
5. Sorun Giderme
If you encounter issues with your Nice Mindy TT1N, consider the following common solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Motor uzaktan kumandaya yanıt vermiyor. | Remote control not paired or battery low. Power supply issue. | Re-pair the remote control. Check remote battery. Verify power to the TT1N unit. |
| Motor beklenmedik bir şekilde durdu. | Overload protection activated. Sensor input. | Check motor for obstructions. Verify sensor readings (e.g., high wind). Allow unit to cool if overloaded. |
| Ünite açılmıyor. | Güç kaynağı yok. Kablolama yanlış. | Check main power supply. Inspect L and N connections. |
Sorun devam ederse, yetkili teknik destek ekibiyle iletişime geçin.
6. Özellikler
| Özellik | Detay |
|---|---|
| Marka | GÜZEL |
| Örnek | TT1N |
| Güç Kaynağı | 230V 50Hz |
| Max Current (Imax) | 2.2A |
| Maksimum Güç (Pmax) | 500W / 400VA |
| Koruma Derecesi | IP55 |
| Boyutlar (U x G x Y) | 98 x 26 x 20 mm (approx. from package dimensions) |
| Radyo frekansı | 433 MHz |
| Remote Control Memory | Up to 30 stations |
| Operating Time Programming | 4 seconds minimum to 4 minutes maximum |
7. Garanti ve Destek
For warranty information, please refer to the documentation provided with your purchase or contact your local Nice distributor. Technical support can be obtained through the official Nice website veya yetkili servis merkezleri.
Daha fazla yardım için lütfen şu adresi ziyaret edin: Nice official webalan.
