1. Giriş
This user manual provides instructions for the safe and effective operation of your Physio Logic Accuflex 10 Digital Thermometer. Please read this manual thoroughly before using the device and keep it for future reference. This thermometer is designed for accurate temperature measurement in approximately 10 seconds.
2. Temel Özellikler
- Clinically proven accuracy for reliable temperature readings.
- Fast results in less than 10 seconds, displayed in Fahrenheit or Celsius.
- Flexible Gentle-Flex Tip for enhanced comfort and safety during use.
- Accuracy within 0.2 degrees F / 0.1 degrees C.
- Audible beep indicates peak temperature has been reached.
- Memory recall function stores the last 5 readings.
- Automatic shut-off feature to preserve battery life.
- Includes a convenient storage case.
- Kolay temizlik için su geçirmez tasarım.
3. Kurulum ve Hazırlık
3.1. Pil Kurulumu
The thermometer comes with one Lithium Ion battery pre-installed. If replacement is needed, refer to the maintenance section.
3.2. Açma/Kapama
To turn on the thermometer, press the power button. The display will show a brief self-test, then the last measured temperature, followed by "Lo" (indicating it's ready for a new measurement). The device will automatically shut off after approximately 10 minutes of inactivity to conserve battery life.
3.3. Switching Between Celsius and Fahrenheit
With the thermometer turned off, press and hold the power button for approximately 5 seconds until the display changes from °F to °C or vice versa. Release the button to select the desired unit.
4. Kullanım Talimatları
Ensure the thermometer is clean before each use. Remove the protective cap from the flexible tip.
Image: The Physio Logic Accuflex 10 Digital Thermometer featuring its flexible tip, designed for comfortable and safe temperature measurement.
4.1. Oral Measurement
- Place the thermometer tip under the tongue as far back as comfortable.
- Close your mouth and hold the thermometer in place.
- Wait for the thermometer to beep (approximately 10 seconds). The display will show the peak temperature.
4.2. Axillary (Underarm) Measurement
- Place the thermometer tip in the armpit, ensuring good skin contact.
- Hold the arm firmly against the body to keep the thermometer in place.
- Wait for the thermometer to beep (measurement time may be slightly longer than oral). The display will show the peak temperature.
4.3. Rectal Measurement
Rectal temperature is generally considered the most accurate for infants and young children. Lubricate the tip with a water-soluble jelly before insertion.
- Gently insert the tip no more than 1/2 inch into the rectum.
- Hold the thermometer in place until it beeps. The display will show the peak temperature.
Caution: Do not force the thermometer. If resistance is met, discontinue insertion immediately.
4.4. Hafıza Geri Çağırma
When the thermometer is turned on, it will briefly display the last measured temperature before showing "Lo". This allows you to track recent readings.
5. Bakım ve Onarım
5.1. Temizleme ve Dezenfeksiyon
The Physio Logic Accuflex 10 Digital Thermometer is waterproof. After each use, clean the thermometer tip with soap and warm water, or wipe with an alcohol swab. Rinse thoroughly and dry before storing. Do not immerse the entire thermometer in water for extended periods.
5.2. Depolama
Store the thermometer in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
Image: The Physio Logic Accuflex 10 Digital Thermometer stored securely in its transparent protective case.
5.3. Pil Değişimi
When the low battery indicator appears on the display, replace the Lithium Ion battery (LR44 or equivalent). Open the battery compartment cover, remove the old battery, and insert the new one with the correct polarity. Close the cover securely.
6. Sorun Giderme
If you encounter any issues with your thermometer, please refer to the table below:
| Hata Simgesi | Sorun | Çözüm |
|---|---|---|
| Lo | Temperature reading lower than 32.0°C (90°F). | Turn off, wait 1 minute and take a new reading. "Lo" does not mean the battery is low. For Digiflex10 thermometer initial screen will show "Lo" which means that your device is getting ready to take a reading. See instructions for more information. |
| Hi | Temperature reading higher than 42.9°C (109.9°F). | Turn off and wait 1 minute. Take new reading. |
| Pil Simgesi | Pil zayıf. | The battery in your digital thermometer needs to be replaced. |
Image: Visual representation of common error icons and their solutions for the digital thermometer.
7. Ürün Özellikleri
- Marka: Fizyo Mantık
- Model Numarası: 016-635
- Ürün Ölçüleri: 13.97 x 2.54 x 1.27 cm; 31.75 g
- Güç Kaynağı: Pille Çalışan (1 Lityum İyon pil gereklidir)
- Görüntüleme Türü: Dijital
- Özellik: Su geçirmez
- Malzeme: Plastik
- Yaş Aralığı (Açıklama): Adult (suitable for all ages with appropriate measurement method)
- Ürün Bakım Talimatları: Sadece elde yıkama
- Menşei ülke: Çin
8. Garanti ve Destek
The Physio Logic Accuflex 10 Digital Thermometer is designed for durability and accuracy. The product packaging indicates "Guaranteed for Life," suggesting a comprehensive warranty. For specific warranty details, claims, or technical support, please refer to the contact information provided on the product packaging or visit the official Physio Logic webalan.
9. Önemli Güvenlik Bilgileri
Yasal Uyarı:
Gerçek ürün ambalajı ve malzemeleri, sitemizde gösterilenlerden daha fazla ve farklı bilgiler içerebilir. webSitemizde sunulan bilgilere tamamen güvenmemenizi ve bir ürünü kullanmadan veya tüketmeden önce her zaman etiketleri, uyarıları ve kullanım talimatlarını okumanızı öneririz.
Always consult with a healthcare professional for medical advice, diagnosis, or treatment. This thermometer is intended for home use and should not replace professional medical consultation.
