giriiş
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your robbe Happy-Fly Electric Glider Assembly Kit 3157. Please read this manual thoroughly before beginning assembly or operation to ensure safe and correct usage. This product is an electric glider model designed for enthusiasts aged 14 years and older.
Güvenlik Bilgileri
Always prioritize safety when assembling and operating your electric glider.
- Yetişkin Denetimi: This product is recommended for ages 14 and up. Younger users should always be supervised by an adult.
- Toplantı: Follow all assembly instructions carefully. Incorrect assembly can lead to malfunction or injury.
- Pil Güvenliği: The product is battery-powered (batteries not included). Use only recommended battery types and follow all battery charging and handling safety guidelines. Do not short-circuit or expose batteries to extreme temperatures.
- Çalışma Ortamı: Operate the glider in open, clear areas away from people, animals, buildings, power lines, and other obstacles. Avoid flying in strong winds or adverse weather conditions.
- Uçuş Öncesi Kontrol: Uçuş öncesinde her zaman kapsamlı bir kontrol yaparak tüm bileşenlerin güvenli bir şekilde takılı olduğundan ve doğru şekilde çalıştığından emin olun.
- Bakım: Regularly inspect the glider for damage or wear. Do not operate a damaged glider.
- Oyuncak değil: While categorized as a toy, this is a sophisticated model aircraft requiring careful handling and operation.
Paket İçeriği
The robbe Happy-Fly Electric Glider Assembly Kit 3157 includes the following components:
- Glider airframe components (wings, fuselage, tail sections)
- Electric motor and propeller assembly
- Control surfaces (ailerons, rudder, elevator)
- Small parts bag (screws, connectors, pushrods, hinges)
- Kullanım kılavuzu (bu belge)
Not: Batteries, charger, and remote control are dahil değil ve ayrıca satın alınması gerekir.
Kurulum ve Montaj
Assembly of the Happy-Fly Electric Glider requires patience and attention to detail. Ensure you have a clean, well-lit workspace.
- Bileşenleri Paketinden Çıkarın: Tüm parçaları ambalajından dikkatlice çıkarın ve paket içeriği listesiyle karşılaştırın.
- Gövde Montajı: Assemble the fuselage sections according to the diagrams. Secure all joints with appropriate adhesive (not included, recommended type specified in diagrams).
- Kanat Eklentisi: Attach the wings to the fuselage. Ensure they are securely seated and aligned.
- Tail Section Installation: Install the horizontal and vertical stabilizers. Pay close attention to alignment for proper flight characteristics.
- Motor and Propeller: Mount the electric motor securely in its designated position. Attach the propeller, ensuring it is balanced and facing the correct direction for thrust.
- Control Surface Linkages: Connect the pushrods from the servos (if applicable, or direct linkages) to the control surfaces (ailerons, rudder, elevator). Ensure free movement and correct throw.
- Elektronik Tesisat: Install your receiver, Electronic Speed Controller (ESC), and servos (if not pre-installed) into the fuselage. Secure wiring to prevent interference with moving parts.
- Pil Bölmesi: Ensure the battery compartment is accessible and secure for battery installation.
- Ağırlık Merkezi (CG): Crucially, balance the glider to achieve the recommended Center of Gravity (CG) as indicated in the assembly diagrams. This is vital for stable flight. Adjust battery position if necessary.
Figure 1: An assembled robbe Happy-Fly Electric Glider, showcasing its sleek white design with red "Happy-Fly" branding on the wings. The glider features a long, slender fuselage, broad wings, and a T-tail configuration, set against a clear blue background.
Kullanım Talimatları
Once assembled and balanced, your Happy-Fly Electric Glider is ready for flight.
- Pil Montajı: Insert the fully charged flight battery into the designated compartment, ensuring it is secured and connected correctly to the ESC.
- Verici Kurulumu: Turn on your remote control transmitter first, then power on the glider's receiver. Ensure proper binding between the transmitter and receiver.
- Kontrol Kontrolü: Before launch, verify that all control surfaces (ailerons, elevator, rudder) respond correctly to transmitter inputs. Check for full and free movement.
- Öğle yemeği: For hand launch, hold the glider firmly and launch it into the wind with a gentle, level throw while applying throttle. For ground launch, ensure sufficient runway and apply throttle smoothly.
- Uçuş Kontrolü:
- Asansör: Uçağın eğimini (yukarı/aşağı) kontrol eder.
- Dümen: Burun hareketini (sağa/sola) kontrol eder.
- Aileronlar: Controls roll (wing tilt), used for banking turns.
- Gaz: Motor hızını ve yüksekliğini kontrol eder.
- Süzülme: Once at desired altitude, reduce or cut throttle to enter gliding mode. Utilize thermals for extended flight.
- İniş: Approach the landing area into the wind. Reduce throttle and gently guide the glider down, flaring just before touchdown to reduce speed.
- Uçuş Sonrası: Disconnect the flight battery from the glider first, then turn off your transmitter. Inspect the glider for any damage.
Bakım
Regular maintenance will extend the lifespan and performance of your glider.
- Temizlik: Wipe down the airframe with a soft, damp cloth after each flight to remove dirt and debris. Avoid harsh chemicals.
- Denetleme: Before and after each flight, inspect all components for cracks, dents, loose connections, or wear. Pay close attention to wings, tail, propeller, and control linkages.
- Pervane Kontrolü: Ensure the propeller is free from nicks or cracks. A damaged propeller can cause vibrations and reduce efficiency. Replace if necessary.
- Pil Bakım: Store batteries in a cool, dry place. Do not leave batteries fully charged or fully discharged for extended periods. Follow manufacturer guidelines for battery charging and storage.
- Depolamak: Store the glider in a safe place, away from direct sunlight, extreme temperatures, and moisture. Consider disassembling wings for compact storage if needed.
- Yedek parça: Keep essential spare parts on hand, such as propellers, control horns, and pushrods, for quick repairs.
Sorun giderme
Bu bölümde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Glider does not respond to controls. |
|
|
| Poor flight stability / difficult to control. |
|
|
| Motor dönmüyor veya itme gücü zayıf. |
|
|
Özellikler
| Özellik | Detay |
|---|---|
| Marka | soyguncu |
| Model Adı | Happy-Fly Electric Glider (Bandit des phoques) |
| Model Numarası | 229943 (Kit 3157) |
| Ürün Türü | Electric Glider Assembly Kit |
| Önerilen Yaş | 14 yaş ve üzeri |
| Ana Malzeme | Plastik |
| Montaj Gerekli | Evet |
| Piller Gerekli | Evet (Dahil değil) |
| Uzaktan Kumanda Dahil | HAYIR |
| Güç Kaynağı | Pil ile çalışır |
| Özel Özellik | Elektrik |
| çizgi film karakteri | Bandit des phoques (Seal Bandit) |
Garanti ve Destek
Information regarding specific warranty terms for the robbe Happy-Fly Electric Glider Assembly Kit 3157 is not provided in this manual. Please refer to the original product packaging or contact robbe customer support directly for warranty details and technical assistance.
For further support or to inquire about spare parts availability, please visit the official robbe websiteyi ziyaret edin veya yerel distribütörünüzle iletişime geçin.
Üretici: Robbe Model sporu
Ürün referansı: 229943
