1. Giriş
This manual provides essential information for the proper setup, operation, and maintenance of your Thorens TD-235 Semi-automatic Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity of the unit.
2. Güvenlik Talimatları
- Üniteyi yağmura veya neme maruz bırakmayın.
- Dolabı açmayın. Tüm servis işlemlerini yetkili personele yaptırın.
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
- Cihaz uzun süre kullanılmayacaksa, güç kablosunu prizden çıkarın.
- Handle the stylus with care to prevent damage and ensure proper playback.
3. Paket İçeriği
Aşağıda listelenen tüm öğelerin ambalajda mevcut olduğundan emin olun:
- Thorens TD-235 Turntable Unit
- Toz Kapağı
- Plak
- tahrik Kayışı
- Keçe Mat
- Karşı ağırlık
- Anti-paten Ağırlık
- Güç Adaptörü
- Audio Cable (RCA)
- AT-95E Cartridge (pre-installed or separate)
- Kullanım Kılavuzu (bu belge)
4. Kurulum
4.1 Paketten Çıkarma ve Yerleştirme
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure adequate ventilation around the unit.
4.2 Plaka ve Kayış Montajı
- Place the platter onto the center spindle.
- Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
- Keçe matı tabağın üstüne yerleştirin.

Resim: Yukarıdan aşağıya view of the Thorens TD-235 turntable with the dust cover closed, illustrating the assembled unit.

Resim: Dahili view of the Thorens TD-235 turntable with the platter removed, showing the motor and belt drive system for installation reference.
4.3 Cartridge and Tonearm Setup
The TD-235 typically comes with an AT-95E cartridge pre-installed. If not, carefully mount the cartridge to the headshell following the cartridge manufacturer's instructions.
- Karşı ağırlık ayarı: Slide the counterweight onto the rear of the tonearm. Adjust it until the tonearm is balanced and floats horizontally. Lock the counterweight in place.
- Tracking Force Setting: Refer to the cartridge specifications (e.g., 2.0 grams for AT-95E). Rotate the numbered ring on the counterweight to the desired tracking force without moving the counterweight itself.
- Kayma Önleyici Ayar: Attach the anti-skating weight to the small fishing line and loop it over the anti-skating rod. Set the anti-skating force to match the tracking force.

Resim: Ayrıntılı view of the tonearm assembly, highlighting the cartridge, counterweight, and anti-skating system for precise adjustment.
4.4 Toz Kapağı Montajı
Insert the hinges of the dust cover into the receptacles at the rear of the turntable plinth.
4.5 Ses ve Güç Bağlantısı
- Connect the integrated RCA audio cables from the turntable to the PHONO input of your amplifier or receiver. Ensure the ground wire is connected to the ground terminal on your ampcankurtaran.
- Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.
5. Kullanım Talimatları
5.1 Açma/Kapatma
The turntable powers on automatically when the tonearm is moved over the platter and powers off when the tonearm returns to its rest or after the record finishes playing.
5.2 Hız Seçimi
Use the speed selector switch, typically located on the front left of the plinth, to choose between 33 1/3 RPM for LPs and 45 RPM for singles. Ensure the correct speed is selected for the record you are playing.
5.3 Plak Çalma
- Place a record on the felt mat on the platter.
- Unlock the tonearm from its rest.
- Kaldırma kolunu kullanarak pikap kolunu yavaşça yukarı kaldırın.
- Move the tonearm over the desired starting groove of the record. The platter should begin to spin automatically.
- Lower the cueing lever slowly to allow the stylus to descend onto the record.

Image: The Thorens TD-235 turntable with its dust cover open, ready for operation, displaying the main components.
5.4 Oynatmayı Durdurma
When the record reaches the end of the last track, the tonearm will automatically lift and return to its rest, and the platter will stop spinning. To stop playback manually:
- Pikap kolunu kaldırma kolunu kullanarak yukarı kaldırın.
- Gently guide the tonearm back to its rest.
- Kumanda kolunu indirin.
- Lock the tonearm in its rest position. The platter should stop spinning shortly after.
6. Bakım
6.1 Kalemin Temizlenmesi
Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
6.2 Kayıtların Temizlenmesi
Keep your records clean to prevent dust and debris from accumulating on the stylus. Use a carbon fiber brush or a record cleaning solution and cloth before each play.
6.3 Pikabın Temizlenmesi
Wipe the plinth and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp Bez kullanılabilir, ardından kuru bir bez kullanılabilir. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
6.4 Drive Belt Replacement
The drive belt may stretch or degrade over time, affecting speed stability. Replace the belt if you notice inconsistent speed or if it appears worn. Refer to section 4.2 for installation.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ses yok veya düşük ses seviyesi | Yanlış amplifier input, loose connections, damaged stylus/cartridge. | Ensure RCA cables are securely connected to the PHONO input. Check ground wire. Inspect stylus for damage. |
| Bozuk ses | Dirty stylus, incorrect tracking force/anti-skating, damaged record. | Clean stylus. Re-adjust tracking force and anti-skating. Try a different record. |
| Yanlış oynatma hızı | Wrong speed selected, worn drive belt. | Verify speed selector switch. Inspect and replace drive belt if necessary. |
| Platter does not spin automatically | Tonearm not moved far enough over platter, power issue. | Ensure tonearm is moved fully over the record area. Check power connection. |
| Automatic stop/return not working | Mechanism obstruction, internal issue. | Ensure no physical obstructions. If problem persists, contact Thorens support. |
8. Özellikler
- Modeli: Thorens TD-235
- Tip: Semi-automatic Turntable
- Motor Tipi: Doğru akım motoru
- Hızlar: 33 1/3, 45 dev/dak
- Kartuş: AT-95E (included)
- Sinyal Formatı: Analog
- Sinyal gürültü oranı: 72 dB
- Güç Kaynağı: Kablolu Elektrik
- Ürün Ölçüleri: 16.14 x 13.39 x 5.12 inç (410 x 340 x 130 mm)
- Ürün Ağırlığı: 14.77 pound (6.7 kg)
- Üretici: Thorens
9. Garanti ve Destek
Thorens products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Thorens website for detailed warranty terms and conditions. For technical support or service inquiries, please contact your authorized Thorens dealer or the Thorens customer service department.
For further assistance, you may visit the official Thorens webalan: www.torens.com





