Antari Z-800 II Fog Machine User Manual

1. Giriş

The Antari Z-800 II Fog Machine is a compact and efficient device designed to produce a steady, continuous output of fog for various applications, including smaller venues, DJs, and personal events. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your Z-800 II fog machine.

Önemli Güvenlik Bilgileri

• Always disconnect the main power plug before opening for service or changing the fuse. Refer servicing to qualified service personnel.
• Never operate your machine without liquid in the tank.
• Use only original smoke fluid. Non-compliance with this warning may result in damage to your machine and will void the warranty.
• Keep the machine dry while plugged in.
• Do not aim towards faces or directly at people.
• Çalışma sırasında makinenin çevresinde yeterli havalandırma olduğundan emin olun.

2. Ürün Bittiview

The Antari Z-800 II features cutting-edge technology for mobility and portability, offering a fast warm-up time and continuous fog output. Its high-efficiency power control system reduces electricity consumption by 20% compared to previous models.

Temel Özellikler:

• 800-Watt Heater for efficient fog production.
• ECO advanced thermal control system for auto-reheat functionality.
• Continuous output capability for consistent atmospheric effects.
• Kompakt ve taşınabilir tasarım.
• Wired remote control (Z-10) included.
• Optional remote controls available (Z-40 Timer Remote, Z-50 Wireless Remote).

Bileşenler:

The image above displays the Antari Z-800 II Fog Machine. It features a robust silver and black casing, a sturdy carrying handle, and a transparent fluid reservoir on top. A wired remote control, equipped with an ON/OFF toggle switch and indicator lights, is connected to the side of the machine. Vents are visible on the sides and top for heat dissipation, and the fog output nozzle is located at the front.

3. Kurulum

1. Paketin açılması: Carefully remove the fog machine and all accessories from its packaging. Inspect for any signs of damage.
2. Atama: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation (at least 60cm clearance). Do not place the machine on carpet or other flammable materials.
3. Sıvı Dolum: Unscrew the cap of the fluid reservoir. Carefully pour Antari FLR or FLG liquid into the reservoir. Do not overfill. Ensure the dip tube is fully submerged in the fluid. Securely screw the cap back on.
4. Uzak bağlantı: Connect the Z-10 wired remote control to the designated port on the back of the fog machine.
5. Güç Bağlantısı: Plug the power cord into a grounded electrical outlet (AC100V/AC120V/AC230V/AC240V 50Hz-60Hz).

4. Kullanım Talimatları

1. Güç Açık: Flip the main power switch on the back of the unit to the 'ON' position. The machine will begin to warm up.
2. Isınma Süresi: The initial warm-up time is approximately 100 seconds. The indicator light on the remote control will illuminate when the machine is ready to produce fog.
3. Producing Fog: Once the ready indicator light is on, press and hold the button on the Z-10 remote control to emit fog. Release the button to stop fog production.
4. Sürekli Çıkış: The Z-800 II is designed for continuous output, meaning it can produce fog as long as the button is held down and the fluid level is sufficient, without requiring reheating cycles during operation.
5. Optional Remotes: If using the optional Z-40 Timer Remote or Z-50 Wireless Remote, refer to their respective instructions for specific operation details. These remotes offer timed intervals or wireless activation.
6. Kapat: After use, turn off the main power switch on the back of the machine and disconnect it from the power outlet.

5. Bakım

Regular maintenance ensures the longevity and optimal performance of your Antari Z-800 II Fog Machine.

Sıvı Yönetimi:

• Always use high-quality, water-based fog fluid specifically designed for fog machines, such as Antari FLR or FLG liquid. Using other types of fluid can damage the machine and void the warranty.
• Do not mix different types of fog fluid.
• Store fog fluid in a cool, dark place, away from direct sunlight and extreme temperatures.
• If the machine will not be used for an extended period, drain the fluid reservoir and run the machine with distilled water for a few minutes to clean the pump and heater coil.

Temizlik:

• Regularly clean the exterior of the machine with a soft, dry cloth.
• Aşırı ısınmayı önlemek için havalandırma deliklerinin toz ve kirden arındırılmış olduğundan emin olun.
• Makineyi suya veya başka bir sıvıya daldırmayın.

6. Sorun Giderme

If problems persist after attempting these solutions, contact Antari customer support or a qualified service technician.

7. Özellikler

8. Garanti ve Destek

Antari products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Antari webSite. Satın alma belgenizi herhangi bir garanti talebi için saklayın.