Altronix OLS120 Güç Kaynağı/Şarj Cihazı Kullanım Kılavuzu

giriiş

This manual provides instructions for the installation, operation, and maintenance of the Altronix OLS120 Power Supply/Charger. The OLS120 is designed to provide regulated 12VDC or 24VDC power at 4 amps, with integrated AC and battery monitoring capabilities, utilizing a 115VAC input.

Önemli Güvenlik Talimatları

• Installation and servicing should only be performed by qualified service personnel.
• To reduce the risk of electric shock, disconnect AC power before servicing.
• Aşırı ısınmayı önlemek için yeterli havalandırmayı sağlayın.
• Üniteyi yağmura veya neme maruz bırakmayın.
• Use only recommended battery types for backup power.

Ürün Bittiview

The Altronix OLS120 is a robust power supply/charger unit engineered for reliable performance in various applications requiring stable DC power and battery backup.

Temel Özellikler

• Selectable 12VDC or 24VDC output.
• 4 amp continuous supply current.
• Integrated AC and battery monitoring.
• 115VAC input for power.

Bileşen Tanımlaması

This image displays the Altronix OLS120 circuit board, highlighting various components essential for its operation. Familiarize yourself with these components before installation.

Temel Bileşenler:

• Cilttage Seçici Anahtar: Located at the top right, labeled "OFF 24VDC ON 12VDC". This switch allows selection between 12VDC and 24VDC output.
• AC Input Terminals: Positioned at the bottom left, marked for 115VAC input connections.
• DC Çıkış Terminalleri: Located at the bottom right, these terminals are for connecting devices that require 12VDC or 24VDC power.
• Akü Terminalleri: Found at the bottom right, near the PTCs, for connecting backup batteries.
• AC Fail Indicator (LED): An LED near the "AC FAL" label, which illuminates upon loss of AC power.
• Low Battery Indicator (LED): An LED near the "LOW BAT" label, indicating a low battery condition.
• Trafo: A central component, often labeled with part numbers like "P POL-30030", responsible for stepping down the AC voltage.
• Kondansatörler: Large cylindrical components (e.g., "C2", "C29A") used for filtering and energy storage.
• Fuses/PTCs: Overcurrent protection devices (e.g., "PTC1", "PTC2") to safeguard the circuit.

Kurulum ve Yükleme

Adım 1: Montaj

Securely mount the OLS120 in a suitable enclosure or location, ensuring adequate ventilation to prevent heat buildup.

Adım 2: Cilttage Seçim

vol yerini bultage selector switch (labeled "OFF 24VDC ON 12VDC") on the circuit board. Set the switch to the desired output voltage (12VDC or 24VDC) before connecting any power.

Step 3: AC Power Connection

Connect the 115VAC input power to the designated AC input terminals. Ensure proper polarity and secure connections. Refer to local electrical codes for wiring practices.

Step 4: DC Output Connection

Connect your devices requiring DC power to the DC output terminals. Observe correct polarity to prevent damage to the connected equipment.

Step 5: Battery Connection (Optional)

For battery backup functionality, connect a suitable rechargeable battery to the battery terminals. Ensure correct polarity. The OLS120 will charge the battery and automatically switch to battery power upon AC failure.

Operasyon

Güç Açık

Once all connections are secure and verified, apply 115VAC power to the unit. The unit will power on and begin providing regulated DC output.

Durum Göstergeleri

• AC Fail (LED): This indicator illuminates when the AC input power is lost, signaling that the unit is operating on battery backup (if connected).
• Low Bat (LED): This indicator illuminates when the connected battery voltage drops below a pre-set threshold, indicating that the battery requires charging or replacement.

Bakım

Genel Bakım

Keep the unit clean and free from dust accumulation. Ensure that all ventilation openings are not obstructed to maintain optimal operating temperature.

Akü Bakımı

If a backup battery is used, periodically check its condition and charge level. Replace the battery as recommended by the battery manufacturer or when its performance degrades.

Sorun giderme

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact Altronix technical support for further assistance.

Özellikler

• Ürün Ölçüleri: 8.4 x 5.7 x 2.9 inç
• Ürün Ağırlığı: 1.2 pound
• Çıkış Hacmitage: 12VDC or 24VDC (selectable)
• Çıkış Akımı: 4 amp
• Giriş Voltage: 115VAC
• Üretici: ALTRONIX
• Model Numarası: OLS120D2X
• İlk Mevcut Tarih: 31 Temmuz 2010

Garanti ve Teknik Destek

Altronix products are backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the official Altronix webSiteyi veya satın alma işleminizle birlikte gelen belgeleri inceleyin.

For technical assistance, product inquiries, or support, please contact Altronix customer service directly. Contact information can typically be found on the manufacturer's webalan.

Manufacturer: Altronix Corp.