1. Giriş
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This device is designed to detect the sound of breaking glass, providing an early warning system for security applications. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Güvenlik Bilgileri
Her zaman aşağıdaki güvenlik önlemlerine uyun:
- Herhangi bir kablolama veya bakım işlemi yapmadan önce elektrik bağlantısını kesin.
- Kurulum, tüm yerel ve ulusal elektrik yönetmeliklerine uygun olarak, yetkili personel tarafından gerçekleştirilmelidir.
- Do not expose the sensor to moisture or extreme temperatures.
- Elektrik tehlikelerini önlemek için uygun topraklamayı sağlayın.
- Çocukların erişemeyeceği yerde saklayınız.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor
- Montaj donanımı (vidalar, dübeller)
- Kurulum Kılavuzu (bu belge)
4. Kurulum ve Kurulum
The FG-1625 sensor is designed for easy installation and can be mounted in various locations to cover all glass types within a 25-foot radius. It features a FlexCore Signal Processor for reliable detection.
4.1 Montaj Yeri
Engelsiz bir montaj yeri seçin view of the protected glass. The sensor can be mounted on walls or ceilings. Avoid mounting directly opposite noisy areas or near air vents that could cause false alarms.
Figure 1: Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This image shows the compact design of the sensor, typically mounted on a wall or ceiling for optimal glassbreak detection.
4.2 Kablolama Talimatları
The FG-1625 is a hardwired sensor. Connect the sensor to your alarm control panel using the following wiring scheme:
- V+ (Red Wire): Connect to the positive power terminal (12V DC).
- V- (Black Wire): Connect to the negative power terminal (Ground).
- C (Yellow Wire): Connect to the Common terminal of the alarm zone.
- NC (Blue Wire): Connect to the Normally Closed terminal of the alarm zone.
Ensure all connections are secure and insulated. Refer to your alarm control panel's manual for specific zone wiring details.
4.3 Hassasiyet Ayarı
The sensor features selectable sensitivity settings to optimize performance for different environments and glass types. Consult the internal dip switches or jumpers (refer to the sensor's internal diagram) to adjust sensitivity. Test the sensor after adjustment using a glassbreak simulator to confirm proper operation.
5. Operasyon
Once installed and powered, the FG-1625 sensor continuously monitors for the specific acoustic frequencies associated with breaking glass. When these frequencies are detected, the sensor triggers an alarm condition on the connected security system.
- Normal Çalışma: The sensor remains in a standby state, monitoring its environment.
- Alarm Durumu: Upon detecting glass breakage, the sensor's relay changes state, signaling the alarm control panel.
- LED Göstergesi: A built-in LED typically illuminates during detection or test mode to provide visual feedback. Refer to the sensor's internal documentation for specific LED behavior.
6. Bakım
The Honeywell Intellisense FG-1625 sensor requires minimal maintenance to ensure continued reliable operation.
- Temizlik: Periodically wipe the sensor's exterior with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Test: It is recommended to test the sensor annually using a glassbreak simulator to confirm its detection capabilities. Follow the instructions provided with your simulator.
- Çevresel Kontroller: Ensure the sensor's environment remains free from excessive vibrations, loud noises (unrelated to glass breakage), or obstructions that could interfere with its acoustic detection.
7. Sorun Giderme
If the sensor is not functioning as expected, refer to the following common issues and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sensor does not respond to glass breakage. |
|
|
| Yanlış alarmlar. |
|
|
| LED not illuminating during test. |
|
|
8. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | FG-1625 (000102701) |
| Marka | Ademco (Honeywell) |
| Sensör Tipi | Acoustic Glassbreak |
| Kapsama Alanı | Up to 25 feet radius |
| Güç Kaynağı | Corded Electric (typically 12V DC from alarm panel) |
| Renk | Beyaz |
| Boyutlar (U x G x Y) | 1 x 4 x 3 inç |
| Ürün Ağırlığı | 2.88 ons (yaklaşık 0.18 lbs) |
| Alarm Çıkışı | Normally Closed (NC) Relay |
| UPC | 781410449596 |
9. Garanti Bilgileri
Specific warranty details for the Honeywell Intellisense FG-1625 sensor are typically provided at the point of purchase or within the product packaging. Generally, Ademco (Honeywell) products come with a limited manufacturer's warranty covering defects in materials and workmanship for a specified period from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty terms, contact your dealer or the manufacturer directly.
10. Teknik Destek
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact your authorized Ademco/Honeywell dealer or security system installer. You may also visit the official Honeywell Security webDestek kaynakları için site.
