1. Giriş
The Beyerdynamic DT 108 is a professional single-ear headset designed for demanding audio environments such as news gathering, film, TV production, and live events. Its robust construction ensures durability, while the comfortable design allows for extended wear. This manual provides essential information for the proper setup, operation, and maintenance of your DT 108 headset.
Image: The Beyerdynamic DT-108-200-400-BLACK single-ear headset, showing the headphone cup, headband, and hypercardioid microphone arm.
2. Temel Özellikler
- Closed, Dynamic Single-Ear Headphone: Provides excellent sound isolation while allowing one ear to monitor ambient sound.
- 400 Ohms Impedance: Optimized for professional audio equipment.
- Dynamic, Hypercardioid Microphone: Designed for clear voice transmission with excellent off-axis rejection, minimizing background noise.
- Yüksek SPL Kapasitesi: Microphone is capable of handling very high sound pressure levels without distortion.
- Olağanüstü Konfor: Features a soft headband and ear pads for long-term wear comfort.
- Rugged and Durable Construction: Built to withstand the rigors of professional use.
3. Kurulum
The DT 108 headset requires a connecting cable (sold separately) to operate. Ensure you have the correct cable for your specific application (e.g., XLR for microphone, 1/4-inch or 3.5mm for headphone).
- Kabloyu bağlayın: Attach the appropriate connecting cable to the headset's connector. Ensure a secure connection.
- Ses bağlantı noktalarını belirleyin: Locate the microphone input and headphone output ports on your audio mixer, intercom system, or recording device. Microphone inputs are typically XLR, and headphone outputs are usually 1/4-inch (6.35mm) or 3.5mm jacks.
- Eklenti: Connect the microphone end of the cable to the microphone input and the headphone end to the headphone output.
- Güç Açık: Turn on your audio equipment.
4. Kullanım Talimatları
- Kulaklığın Takılması: Place the single ear cup over one ear, ensuring a comfortable and secure fit. The headband should rest comfortably over your head. The open side allows for monitoring of ambient sound.
- Mikrofonu Ayarlama: Position the microphone arm so that the microphone is approximately 1-2 inches (2.5-5 cm) from the corner of your mouth. This optimal distance helps capture clear audio and minimizes breath noises.
- Ses İzleme: Adjust the headphone volume on your connected audio device to a comfortable listening level. The DT 108 is designed to provide clear audio monitoring.
- Speaking into the Microphone: Speak clearly and directly into the microphone. The hypercardioid pattern is designed to pick up sound primarily from the front, reducing unwanted background noise.
5. Bakım ve Özen
- Temizlik: Kulaklığı silmek için yumuşak, kuru bir bez kullanın. Kulak yastıkları için ise hafifçe kuru bir bez yeterlidir.amp Hafif sabunlu bir bez kullanılabilir, ancak kullanmadan önce tamamen kuru olduklarından emin olun. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Depolamak: Kulaklığı temiz, kuru bir yerde, aşırı sıcaklıklardan ve doğrudan güneş ışığından uzakta saklayın. Kablonun dolaşmasını önleyin.
- Kablo Bakımı: Handle the connecting cable with care. Avoid sharp bends or excessive pulling, which can damage the internal wiring.
- Kulak Yastığı Değişimi: Ear pads are replaceable. If they become worn or damaged, contact Beyerdynamic support or an authorized dealer for replacement parts.
6. Sorun Giderme
- No Sound from Headphone:
- Check if the headphone cable is securely connected to both the headset and the audio output.
- Verify the volume level on your audio device.
- Ses kaynağının aktif olduğundan ve sinyal gönderdiğinden emin olun.
- Test with another audio source or device if possible.
- Mikrofon Çalışmıyor:
- Check if the microphone cable is securely connected to both the headset and the microphone input.
- Ensure the microphone input on your audio device is enabled and its gain/level is appropriately set.
- Confirm that phantom power is not accidentally engaged if your device provides it, as this dynamic microphone does not require it and it could potentially cause issues.
- Test with another microphone input or device if possible.
- Bozuk Ses:
- Reduce the input gain on your audio device if the sound is distorted from the microphone.
- Lower the output volume if the headphone audio is distorted.
- Hasarlı kablo veya konnektörleri kontrol edin.
7. Özellikler
| Özellik | Şartname |
|---|---|
| Model Adı | DT 108 |
| Kulaklık Tipi | Closed, Dynamic, Single-Ear |
| Empedans | 400 Ohm |
| Frequency Range (Headphone) | 30 - 20,000 Hz |
| Mikrofon Türü | Dynamic, Hypercardioid |
| Bağlantı Teknolojisi | Kablolu |
| Malzeme | Kumaş, Plastik |
| Renk | Siyah |
| Ürün Ağırlığı | 0.62 Pound (yaklaşık 9.9 ons) |
| Ürün Boyutları | 8.5 x 3.1 x 7.9 inç |
8. Garanti ve Destek
Beyerdynamic products are manufactured to high quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beyerdynamic webalan.
For technical support, spare parts, or service inquiries, please contact Beyerdynamic customer service or visit their official support page. You can find more information and contact details on the Beyerdynamic Store on Amazon veya küresel webalan.
