1. Giriş
This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your DeVilbiss KB-555 KB Pressure Cup. Please read this manual thoroughly before operating the equipment and retain it for future reference.
The DeVilbiss KB-555 is a 2-quart (approximately 1.9 liters) aluminum pressure cup designed for use with spray guns, providing a regulated material flow for various coating applications.
2. Önemli Güvenlik Bilgileri
Always observe standard safety precautions when operating this equipment. Failure to follow these instructions may result in serious injury or property damage.
- Kullanmadan önce bu kılavuzdaki tüm talimatları okuyun ve anlayın.
- Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and respiratory protection, as recommended by the material manufacturer.
- Tehlikeli dumanların birikmesini önlemek için çalışma alanında yeterli havalandırmanın olduğundan emin olun.
- Never exceed the maximum recommended operating pressure for the cup or your spray gun.
- Always depressurize the cup before attempting to open, clean, or service it.
- Keep the equipment clean and in good working condition.
- Do not modify the pressure cup. Use only genuine DeVilbiss replacement parts.
Öneri 65 Uyarısı:
UYARI: Bu ürün, Kaliforniya Eyaleti tarafından kansere, doğum kusurlarına veya diğer üreme sistemi hasarlarına neden olduğu bilinen kimyasallara maruz kalmanıza neden olabilir. Daha fazla bilgi için lütfen şu adresi ziyaret edin: www.P65Uyarılar.ca.gov.
3. Ürün Bittiview
3.1 Bileşenler
The DeVilbiss KB-555 KB Pressure Cup consists of a durable aluminum container, a lid assembly with a pressure regulator, and a handle for portability and hanging.
Image 1: DeVilbiss KB-555 KB Pressure Cup. This image displays the complete assembly of the 2-quart aluminum pressure cup, including the main container, the lid with integrated pressure regulator, and the metal hook for suspension.
3.2 Özellikler
- Kapasite: 2 Quart (yaklaşık 1.9 litre)
- Malzeme: Durable Aluminum construction
- Basınç Düzenleme: Integrated regulator for consistent material flow.
- Taşınabilirlik: Equipped with a handle/hook for easy transport and hanging.
- Menşei: Amerika Birleşik Devletleri'nde üretilmiştir.
4. Kurulum
4.1 Paketin açılması
- Carefully remove the pressure cup from its packaging.
- Inspect all components for any signs of shipping damage. If damage is found, contact your supplier immediately.
- Ambalaj malzemelerini ileride saklama veya taşıma için muhafaza edin.
4.2 Connecting to Air Supply and Spray Gun
- Ensure all connections are clean and free of debris.
- Connect the air inlet of the pressure cup to a clean, regulated air supply line using appropriate fittings.
- Connect the material outlet of the pressure cup to the material inlet of your spray gun.
- Tighten all connections securely to prevent air or material leaks. Do not overtighten.
5. Operasyon
5.1 Bardağı Doldurmak
- Ensure the pressure cup is depressurized before opening.
- Unscrew the lid and carefully pour the desired coating material into the cup. Do not overfill.
- Securely reattach the lid, ensuring it is properly sealed.
5.2 Basıncın Ayarlanması
- With the cup filled and connected, slowly introduce air pressure to the system.
- Use the integrated regulator on the cup to set the desired material pressure. Refer to your material manufacturer's recommendations for optimal pressure settings.
- Always adjust pressure gradually.
5.3 Kullanım Talimatları
- Maintain consistent air pressure for uniform material delivery.
- Monitor material levels and refill as needed, always depressurizing the cup first.
- After each use, or when changing materials, thoroughly clean the cup and associated components.
6. Bakım
6.1 Temizlik
- Depressurize the cup completely before cleaning.
- Empty any remaining material from the cup.
- Disassemble the lid and cup. Clean all parts with an appropriate cleaning solution recommended by your material manufacturer.
- Pay special attention to the regulator and air passages to ensure they are free of dried material.
- Rinse thoroughly and allow all components to dry completely before reassembly or storage.
6.2 Depolama
- Store the clean, dry pressure cup in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure all seals and O-rings are in good condition before storage. Replace if worn or damaged.
7. Sorun Giderme
This section addresses common issues you might encounter with the DeVilbiss KB-555 KB Pressure Cup.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Malzeme akışı yok | No air pressure; clogged material line; regulator set too low. | Check air supply; clean material line; increase regulator pressure. |
| Air or material leak from lid | Lid not tightened; damaged gasket/seal; debris on sealing surface. | Tighten lid securely; inspect and replace gasket/seal; clean sealing surfaces. |
| Inconsistent material flow | Fluctuating air supply; regulator malfunction; material viscosity issues. | Ensure stable air supply; check/replace regulator; adjust material viscosity. |
8. Teknik Özellikler
| Şartname | Detay |
|---|---|
| Model Adı | KB-555 KB Pressure Cup |
| Parça Numarası | 120033 |
| Kapasite | 2 Quart (yaklaşık 1.9 Litre) |
| Malzeme | Alüminyum |
| Ürün Ağırlığı | 5 pound (yaklaşık 2.27 kg) |
| Ürün Boyutları | 8 x 8 x 12 inç (yaklaşık 20.3 x 20.3 x 30.5 cm) |
| Üretici | DeVilbiss |
| İlk Mevcut Tarih | 1 Mayıs 2015 |
9. Garanti ve Müşteri Desteği
For information regarding product warranty, please refer to the warranty documentation provided with your purchase or visit the official DeVilbiss webSite. Garanti şartları ve koşulları değişiklik gösterebilir.
For technical assistance, replacement parts, or further inquiries, please contact DeVilbiss customer support directly. Contact information can typically be found on the manufacturer's official website veya ürün ambalajı.
