Irritrol RS1000 Wireless Rain Sensor Instruction Manual

giriiş

The Irritrol RS1000 Wireless Rain Sensor is designed to conserve water by preventing irrigation during or after sufficient rainfall. This device ensures your irrigation system operates efficiently, avoiding unnecessary watering and contributing to water conservation efforts. It communicates wirelessly with your irrigation controller, providing real-time wet/dry status updates.

Ürün Bileşenleri

The Irritrol RS1000 Wireless Rain Sensor system consists of two primary units:

1. Wireless Rain Sensor Transmitter (Outdoor Unit)

This unit is installed outdoors and contains the rain-sensing mechanism. It detects rainfall and wirelessly transmits the "wet" or "dry" status to the receiver. It features adjustable settings for rain accumulation and evaporation rate, and is labeled with "Irritrol" and includes the sensing discs.

2. Wireless Rain Sensor Receiver (Indoor Unit)

This unit is installed indoors, typically near your irrigation controller. It receives signals from the outdoor transmitter and communicates with the controller to pause or resume irrigation based on the rain status. It features indicator lights for "Sensor Rain Status" (blinking - bypass on), "Signal", and "Power" (blinking - attn. reqd.), along with a "Smart Bypass" button. The model number "RS 1000" is also visible on the unit.

Image: The complete Irritrol RS1000 Wireless Rain Sensor kit, including the outdoor rain sensor transmitter, the indoor receiver unit with wiring, and the mounting bracket.

Temel Özellikler

• Constant Communication: Ensures the controller is continually updated with the sensor's "wet" or "dry" status, even after a controller power outage.
• Çok Yönlü Montaj Seçenekleri: Includes a Quick-Clip gutter bracket and a 1/2" conduit adapter, requiring no special tools for installation.
• Sinyal Gücü Göstergesi: Provides visual confirmation of correct installation, communication link, and signal integrity (for wireless models).
• Patented Wireless Technology: Offers reliable and efficient wireless operation.

Kurulum ve Yükleme

Receiver Installation (Indoor Unit)

1. Montaj: Mount the receiver unit indoors, close to your irrigation controller. Ensure it is in a location where it can receive a strong wireless signal from the outdoor transmitter.
2. Kablolama: The receiver typically has five wires. Two wires connect to your 24 VAC power lines on the irrigation controller. The remaining three wires are for the switch: one common ("Break Valve Common") and two for Normally Open (NO) and Normally Closed (NC) connections. Most systems use the Normally Closed (NC) connection. Refer to your irrigation controller's manual for specific sensor hook-up instructions. If your system has a jumper connecting two sensor connections, remove it before connecting the sensor.
3. Güç Açık: Once wired, the receiver's power indicator light should illuminate.

Transmitter Installation (Outdoor Unit)

1. Lokasyon Seçimi: Choose an outdoor location that is exposed to unobstructed rainfall. Avoid areas under eaves, trees, or other overhangs that might block rain from reaching the sensor. Ensure the sensor is pointing upwards.
2. Montaj: Use the provided Quick-Clip gutter bracket or 1/2" conduit adapter to securely mount the transmitter. Ensure it is level and stable.
3. Anten: Ensure the antenna wire is extended for optimal signal transmission to the indoor receiver.
4. Gümrükleme: Trim any nearby trees or foliage that could obstruct rainfall from reaching the sensor or interfere with its operation.

Operating the Rain Sensor

Adjusting Rain Sensitivity

The outdoor transmitter contains water-absorbent rings that expand when wet and contract when dry. You can adjust the amount of rainfall required to activate the sensor (e.g., 1/8", 1/4", 1/2", 3/4") by rotating the top cap of the sensor. A higher setting requires more rain to trigger the sensor. There is also a twist ring to control the evaporation rate, which determines how quickly the rings dry out and allow irrigation to resume. Adjust this based on your local climate and soil type.

Smart Bypass Function

The indoor receiver unit features a "Smart Bypass" button. Pressing this button allows you to temporarily override the rain sensor and run your irrigation system even if rain is detected. The signal light on the receiver may go out when bypass is active but will automatically reset within approximately one hour after the bypass is turned off.

Bakım

Pil Değişimi

The outdoor transmitter unit is powered by a battery, typically located underneath the unit. While batteries are designed for long life (e.g., up to five years), they will eventually need replacement. Refer to the specific instructions provided with your sensor for the correct battery type and replacement procedure. Regular battery checks are recommended.

Cleaning the Sensing Mechanism

Periodically inspect the water-absorbent rings inside the outdoor transmitter for any debris, dirt, or insect nests that might obstruct their movement. The rings can be removed for cleaning if necessary. Ensure they are reinstalled correctly after cleaning.

Sorun giderme

Özellikler

• Ürün Ölçüleri: 1.5 x 3.75 x 1.75 inç
• Ürün Ağırlığı: 9.1 ons
• Model Numarası: RS1000
• Üretici: İritrol

Garanti ve Destek

For detailed warranty information, technical support, or to purchase replacement parts, please refer to the official Irritrol webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.