1. Giriş
This manual provides instructions for the safe and efficient use of your Legrand On-Q PW7760 12VDC 18W Power Supply. This power supply is designed to provide reliable 12V DC power for various data networking and video products within a structured wiring enclosure. Please read this manual thoroughly before installation and operation.
2. Güvenlik Bilgileri
WARNING: Risk of Electric Shock. Do not open the unit. Refer all servicing to qualified personnel.
- Ensure the power supply is disconnected from the main power source before performing any installation, maintenance, or troubleshooting.
- Üniteyi neme veya aşırı sıcaklıklara maruz bırakmayın.
- Bu ürün yalnızca iç mekanda kullanılmak üzere tasarlanmıştır.
- Use only with compatible devices requiring 12V DC input.
- Aşırı ısınmayı önlemek için ünite çevresinde uygun havalandırma olduğundan emin olun.
- The power supply is UL listed, indicating compliance with safety standards.
3. Paket İçeriği
Paketinizde tüm öğelerin mevcut olduğundan emin olun:
- Legrand On-Q PW7760 12VDC 18W Power Supply (1 unit)
- Kullanım Kılavuzu (bu belge)
4. Kurulum ve Kurulum
The PW7760 power supply is designed for wall mounting, typically within a structured wiring enclosure. Follow these steps for proper installation:
- Güç Kaynağının Montajı: The unit features a design suitable for wall mounting. Secure the power supply within your structured wiring enclosure using appropriate fasteners (not included) through the designated mounting points. Ensure it is firmly attached to prevent accidental dislodgement.
- AC Gücüne Bağlanma: Plug the power supply's AC input cord into a standard 120V AC wall outlet or a power strip within the enclosure. Ensure the outlet is easily accessible and not overloaded.
- Bağlantı Cihazları: Connect the DC output barrel connector of the PW7760 power supply to the 12V DC input port of the device you intend to power (e.g., network switch, video module). Verify that the device requires 12V DC and does not exceed the power supply's 18W (1.5A) capacity.
5. Kullanım Talimatları
Once the power supply is correctly installed and connected to your devices:
- Güç Açık: If the power supply has an integrated switch, toggle it to the 'ON' position. Otherwise, ensure the wall outlet or power strip it is connected to is active.
- İşlemi Doğrulayın: Check the connected devices for power indicators to confirm they are receiving power.
- Kapat: To disconnect power, either toggle the integrated switch to 'OFF' or unplug the power supply from the AC outlet.
6. Bakım
The Legrand On-Q PW7760 Power Supply requires minimal maintenance:
- Temizlik: Disconnect the power supply from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Denetleme: Periodically inspect the power cords and connectors for any signs of damage, fraying, or loose connections. Replace any damaged components immediately.
- Havalandırma: Ensure that the area around the power supply remains clear of obstructions to allow for proper airflow and prevent overheating.
7. Sorun Giderme
Güç kaynağınızla ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlar ve çözümlere bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Bağlı cihazlara güç gelmiyor | Power supply not plugged in or AC outlet is off. | Ensure the power supply is securely plugged into a live AC outlet. Check the outlet with another device. |
| Bağlı cihazlara güç gelmiyor | Güç kaynağı anahtarı kapalı konumda. | If applicable, ensure the power supply's integrated switch is in the 'ON' position. |
| Bağlı cihazlara güç gelmiyor | DC output cable is loose or damaged. | Verify the DC barrel connector is firmly seated in the device's input. Inspect the cable for damage. |
| Connected device malfunctions or restarts | Device requires more power than 18W. | Confirm the power requirements of your device. This power supply provides 12VDC at 18W. Using it with higher-power devices may cause instability or damage. |
| Power supply feels excessively hot | Poor ventilation or overloaded. | Ensure adequate airflow around the unit. Disconnect some devices if multiple are connected and check if the temperature reduces. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | PW7760 |
| Üretici | Legrand On-Q |
| Giriş Voltage | 120V AC (ABD Standardı) |
| Çıkış Hacmitage | 12V doğru akım |
| Netage | 18 Watt |
| Ampöfke | 0.4 Amps (Input), 1.5 Amp(Çıkış) |
| Boyutlar (U x G x Y) | 3.15 x 1.97 x 1.3 inç |
| Ürün Ağırlığı | 6.4 ons |
| Malzeme | High Impact Flame Retardant Plastic |
| Montaj Tipi | Duvara Montaj |
| Özel Özellikler | Kısa Devre Koruması |
| Sertifikalar | UL Listeli |
9. Garanti ve Destek
For warranty information and technical support, please refer to the official Legrand On-Q website veya doğrudan müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma kanıtı olarak satın alma makbuzunuzu saklayın.
Çevrimiçi Kaynaklar: www.legrand.us/on-q
