giriiş
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Schlage FA358STN609 Sutton Exterior Handleset with Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your product.
Paket İçeriği
Before beginning installation, verify that all components are present. The FA358STN609 package includes the exterior half of the handleset and deadbolt components. Not: This unit requires a separate FA359 or F359 interior handleset to complete the full assembly.
- Exterior Handleset (Lever/Knob and Trim)
- Exterior Deadbolt Cylinder
- Montaj Donanımı
- Montaj Vidaları
- Anahtarlar
Kurulum ve Yükleme
Proper installation is crucial for the security and functionality of your handleset. Follow these steps carefully:
- Kapı Hazırlığı: Ensure your door has the necessary bore holes. A minimum 4-inch center-to-center door preparation is required for this two-piece handleset model.
- Sürgü Mandalını Takın: Sürgü kilidini kapı kenarına yerleştirin. Birlikte verilen vidalarla sabitleyin.
- Install Deadbolt Cylinder: Place the exterior deadbolt cylinder through the top bore hole.
- Dış Kapı Kolu Setini Takın: Position the exterior handleset through the lower bore hole.
- Adjust Bottom Through-Bolt: The patented adjustable bottom through-bolt can move up and down by 1 1/2 inches. Align it with the pre-existing hole in your door for a secure fit.
- Secure Handleset: Attach the interior handleset (FA359 or F359, sold separately) to the exterior components using the provided screws, ensuring all parts are aligned and tightened securely.
- Test İşlemi: After installation, test the deadbolt and handleset operation with the key and from the interior to ensure smooth locking and unlocking.
Image: Schlage FA358STN609 Sutton Exterior Handleset with Deadbolt in Antique Brass finish. This image shows the complete exterior assembly of the handleset, including the deadbolt cylinder and the lower handle with its decorative plate.
Kullanım Talimatları
The Schlage FA358STN609 handleset provides secure entry and exit for your door.
- Sürgü Kilidini Kilitlemek: From the exterior, insert the key into the deadbolt cylinder and turn to extend the bolt into the door frame. From the interior, rotate the thumbturn to extend the bolt.
- Sürgü Kilidini Açmak: From the exterior, insert the key into the deadbolt cylinder and turn to retract the bolt. From the interior, rotate the thumbturn to retract the bolt.
- Operating the Handleset Latch: From the exterior, turn the handle to retract the latch bolt. From the interior, turn the handle to retract the latch bolt.
Bakım
To ensure the longevity and smooth operation of your Schlage handleset, follow these maintenance guidelines:
- Temizlik: Sap setini yumuşak bir bezle düzenli olarak temizleyin.amp Kumaşı aşındırıcı temizleyicilerden, çözücülerden veya sert kimyasallardan uzak tutun; bunlar cilaya zarar verebilir.
- Yağlama: Periodically apply a small amount of graphite-based lubricant to the keyway and internal mechanisms to maintain smooth operation. Do not use oil-based lubricants, as they can attract dust and debris.
- Denetleme: Periodically check all screws and mounting hardware for tightness. Tighten any loose fasteners to prevent wobbling or misalignment.
Sorun giderme
If you encounter issues with your handleset, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Key turns but deadbolt does not retract/extend. | Misalignment of deadbolt mechanism or worn internal components. | Check for obstructions in the door frame. Ensure the deadbolt latch is properly installed. If the issue persists, professional assistance may be required. |
| Sap gevşek veya sallanıyor. | Gevşek montaj vidaları. | Tighten all visible mounting screws. Ensure the adjustable bottom through-bolt is secure. |
| Difficulty inserting or turning key. | Dirt/debris in keyway or lack of lubrication. | Apply graphite lubricant to the keyway. Clean the key if it appears dirty. Do not force the key. |
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | FA358STN609 |
| Marka | SCHLAGE |
| Malzeme | Pirinç, Metal |
| Renk/Bitiş | Antik Pirinç |
| Kilit Tipi | Key Lock (Deadbolt) |
| Özel Özellik | Adjustable bottom through-bolt (1 1/2" range) |
| Required Door Prep | 4" minimum center-to-center for two-piece model |
| Ürün Ağırlığı | Yaklaşık 3 pound |
| UPC | 043156822447 |
Garanti Bilgileri
This Schlage handleset is backed by a Ömür Boyu Mekanik ve Yüzey Kaplama Garantisi. This warranty covers defects in material and workmanship for the lifetime of the product, provided it is installed and maintained according to these instructions. For specific terms and conditions, please refer to the official Schlage warranty documentation or contact customer support.
Müşteri Desteği
For further assistance, technical support, or warranty claims, please visit the official Schlage website or contact their customer service department. Keep your model number (FA358STN609) and purchase information readily available when contacting support.
Schlage Official Webalan: www.schlage.com
