Winco Stainless Steel Juice Dispenser (Model 902) Instruction Manual

1. Giriş

Thank you for choosing the Winco Stainless Steel Juice Dispenser, Model 902. This dispenser is designed for serving various beverages such as lemonade, orange juice, and iced tea in commercial or event settings. Its durable stainless steel construction and clear polycarbonate container ensure both longevity and an attractive presentation. This manual provides essential information for the safe and efficient use, assembly, cleaning, and maintenance of your dispenser.

Temel Özellikler:

• Capacity: Approximately 2.2 Gallons (8.3 Liters)
• Material: Stainless Steel body, clear polycarbonate juice container
• Integrated stainless steel ice chamber to keep beverages chilled without dilution
• Kolay temizlik için çıkarılabilir damlama tepsisi

2. Güvenlik Bilgileri

Please read all safety instructions before operating the appliance to prevent injury or damage.

• Always place the dispenser on a stable, level surface to prevent tipping.
• Do not fill the dispenser with hot liquids. This dispenser is designed for cold beverages only.
• Exercise caution when handling the dispenser, especially when full, due to its weight.
• Çocukların erişemeyeceği yerde saklayınız.
• Do not use abrasive cleaners or scouring pads, as they can scratch the stainless steel or polycarbonate surfaces.
• Bu ürün bulaşık makinesinde yıkanmaya uygun değildir. Tüm bileşenleri elde yıkayın.

3. Parça Listesi

Montaja başlamadan önce tüm parçaların eksiksiz ve hasarsız olduğundan emin olun:

1. Paslanmaz Çelik Taban
2. Çıkarılabilir Damlama Tepsisi
3. Clear Polycarbonate Juice Container (2.2 Gallon capacity)
4. Paslanmaz Çelik Kapak
5. Stainless Steel Ice Chamber (removable)
6. Spigot/Faucet Assembly

Şekil 1: Winco Stainless Steel Juice Dispenser, Model 902. Shows the complete assembled unit including the base, clear container, lid, and spigot.

4. Kurulum ve Montaj

Follow these steps to assemble your juice dispenser:

1. Paketi aç: Tüm parçaları ambalajından dikkatlice çıkarın. Dilerseniz ambalajı ileride saklamak üzere muhafaza edin.
2. Temiz: Before first use, wash all parts that will come into contact with beverages (juice container, lid, ice chamber, spigot) with warm, soapy water. Rinse thoroughly and dry completely.
3. Assemble Spigot: Ensure the spigot is securely attached to the juice container. If it requires assembly, follow the instructions provided with the spigot. Ensure all washers and nuts are tightened to prevent leaks.
4. Damlama Tepsisini Yerleştirin: Position the removable drip tray onto the stainless steel base.
5. Position Juice Container: Carefully place the clean polycarbonate juice container onto the stainless steel base, ensuring it sits securely above the drip tray.
6. Insert Ice Chamber: If using, fill the stainless steel ice chamber with ice cubes and insert it into the center of the juice container.
7. Add Beverage: Pour your desired cold beverage into the polycarbonate container. Do not overfill.
8. Kapağı Yerleştirin: Securely place the stainless steel lid on top of the juice container.

5. Kullanım Talimatları

Using your Winco Juice Dispenser is straightforward:

1. Ensure the dispenser is fully assembled and filled with your cold beverage.
2. To dispense, push the spigot lever down. The beverage will flow out.
3. To stop dispensing, release the spigot lever.
4. Monitor the ice chamber and refill with ice as needed to maintain beverage temperature.
5. Regularly check the drip tray and empty it when full to prevent overflow.

6. Bakım ve Temizlik

Proper cleaning and maintenance will extend the life of your dispenser.

Günlük Temizlik:

1. Boş: After each use, empty any remaining beverage from the container.
2. Demonte: Remove the lid, ice chamber, and juice container from the base. Detach the spigot from the container. Empty the drip tray.
3. Yıkamak: Hand wash all components (juice container, lid, ice chamber, spigot, drip tray) with warm water and a mild, non-abrasive dish soap. Use a soft cloth or sponge. For the spigot, ensure thorough cleaning to prevent residue buildup.
4. Durulama: Tüm sabun kalıntılarını gidermek için tüm parçaları temiz suyla iyice durulayın.
5. Kuru: Dry all components completely with a soft, clean cloth to prevent water spots and rust on stainless steel parts. Allow the polycarbonate container to air dry fully before reassembly or storage.
6. Temiz Temel: Wipe down the stainless steel base with a damp bezle silin ve hemen kurulayın.

Depolamak:

Store the disassembled, clean, and dry dispenser in a cool, dry place. Avoid stacking heavy items on the polycarbonate container to prevent damage.

7. Sorun Giderme

Karşılaşabileceğiniz yaygın sorunlara yönelik çözümler şunlardır:

• Leakage from Spigot:
  Çözüm: Ensure the spigot is properly installed and tightened. Check that all rubber washers are correctly seated and not damaged. If the spigot is old or damaged, it may need replacement.
• Yavaş Dağıtım:
  Çözüm: Check if the beverage contains pulp or fruit pieces that might be clogging the spigot. Clean the spigot thoroughly. Ensure the ice chamber is not obstructing the flow.
• Beverage Not Staying Cold:
  Çözüm: Ensure the ice chamber is filled with sufficient ice. Replace melted ice regularly. The dispenser is designed for temporary chilling, not long-term refrigeration.
• Cloudy Polycarbonate Container:
  Çözüm: This can occur from using abrasive cleaners or hard water. Use only mild soap and soft cloths for cleaning. For hard water stains, a solution of white vinegar and water can help, followed by thorough rinsing.

8. Özellikler

9. Garanti ve Destek

For warranty information or technical support regarding your Winco Stainless Steel Juice Dispenser, Model 902, please refer to the documentation included with your purchase or contact Winco customer service directly. Contact details can typically be found on the manufacturer's official websitede veya satın alma fişinizde yer almaktadır.