1. Giriş
Thank you for choosing Moen. This manual provides detailed instructions for the installation, operation, and maintenance of your Moen T2701BN Level Posi-Temp Valve Trim Kit. This trim kit is designed to complement the modern aesthetic of your bathroom while providing reliable temperature and flow control. Please read these instructions carefully before beginning installation to ensure proper function and to avoid damage.
2. Güvenlik Bilgileri
- Herhangi bir tesisat işine başlamadan önce mutlaka ana su vanasını kapatın.
- Kurulum sırasında koruyucu gözlük gibi uygun kişisel koruyucu ekipman kullanın.
- Kurulum sürecinin herhangi bir noktasında emin değilseniz, kalifiye bir tesisatçıya danışın.
- Sızıntıları önlemek için tüm bağlantıların güvenli olduğundan emin olun.
- This trim kit requires a compatible Moen Posi-Temp pressure-balancing valve (dahil değil). Ensure you have the correct valve body installed (e.g., 2510, 2590, 2570, or 2520 series).
3. Paket İçeriği
Kurulumdan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Kol Kolu
- Escutcheon Plate (Wall Plate)
- Handle Adapter/Mechanism
- Mounting Hardware (screws, gaskets)
- Kurulum Kılavuzu (bu belge)
Not: The Posi-Temp pressure-balancing valve body is sold separately and is not included with this trim kit.
This image displays the Moen T2701BN Level Posi-Temp Valve Trim Kit, featuring its single lever handle and escutcheon plate in a brushed nickel finish. The design is modern and sleek, intended for shower or tub installations.
4. Gerekli Araçlar
- Ayarlanabilir Anahtar
- Yıldız uçlu tornavidalar
- Hex Wrench (size may vary, typically 7/64 inch or 3/32 inch, refer to specific valve instructions)
- Plumber's Putty or Silicone Sealant (optional, for escutcheon plate)
- Temizlik Bezi
5. Kurulum Talimatları
These instructions assume a compatible Moen Posi-Temp valve body is already installed in the wall. Refer to the valve body's specific installation manual for rough-in details.
- Vanayı Hazırlayın: Ensure the water supply to the valve is turned off. Remove any existing trim components.
- Install the Escutcheon Plate: Position the escutcheon plate over the valve body opening. Ensure the plate is level. Secure it to the wall using the provided screws. Do not overtighten. For a watertight seal, a thin bead of silicone sealant can be applied around the perimeter of the plate before securing.
- Install the Handle Adapter: Slide the handle adapter onto the valve stem. Ensure it is properly seated.
- Sapı Takın: Place the lever handle onto the handle adapter. Secure the handle to the adapter using the small set screw, typically located on the underside of the handle. Use the appropriate hex wrench.
- Sızıntı ve İşlevsellik Testi: Turn the main water supply back on. Slowly open the valve by moving the handle. Check for any leaks around the escutcheon plate and handle. Verify that the handle rotates smoothly to control temperature and flow.
6. Kullanım Talimatları
The Moen T2701BN Level Posi-Temp Valve Trim Kit features a single lever handle for controlling both water temperature and flow.
- Açma/Kapatma: Suyu açmak için kolu duvardan uzağa doğru çevirin. Suyu kapatmak için kolu tekrar duvara doğru çevirin.
- Sıcaklığı Ayarla: Rotate the handle counter-clockwise for warmer water and clockwise for cooler water. The Posi-Temp valve maintains consistent water temperature even with pressure fluctuations in the water supply.
- Akışı Ayarla: The flow rate is controlled by how far the handle is rotated away from the wall.
7. Bakım
To maintain the beautiful finish of your Moen T2701BN trim kit, follow these cleaning guidelines:
- Yumuşak bir bezle temizleyin.amp Kumaş.
- Use only mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the brushed nickel finish and void the warranty.
- Regular cleaning will help prevent water spots and mineral buildup.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Water leaks from handle or escutcheon. | Loose connections, damaged O-rings/gaskets, improper installation. | Ensure all screws are tightened. Check for proper seating of gaskets. If leaks persist, the valve cartridge may need inspection or replacement (refer to valve body manual). |
| No water or low water flow. | Main water supply off, debris in valve, clogged aerator (if applicable to showerhead/spout). | Check main water supply. Consult valve body manual for cartridge inspection. |
| Temperature difficult to adjust or inconsistent. | Valve cartridge issue, temperature limit stop setting. | Refer to the Posi-Temp valve body manual for instructions on adjusting the temperature limit stop or inspecting the cartridge. |
9. Özellikler
- Model Numarası: T2701BN
- Marka: Moen
- Sona ermek: Fırçalanmış Nikel
- Malzeme: Brass (handle), Nickel (finish)
- Kolları sayısı: 1
- Montaj Tipi: Duvara Montaj
- Compatible Valve: Moen Posi-Temp Pressure-Balancing Valve (sold separately)
- Ürün Ağırlığı: Yaklaşık 1.3 Pound
10. Garanti Bilgileri
Moen products are manufactured under the highest standards of quality and workmanship. Moen offers a limited lifetime warranty to the original consumer purchaser against leaks, drips, and finish defects for as long as the original consumer purchaser owns their home. Other components are warranted for a period of one year from the date of purchase. For complete warranty details, please visit the official Moen webWeb sitesini ziyaret edin veya Moen müşteri hizmetleriyle iletişime geçin.
11. Destek ve İletişim
If you require further assistance or have questions regarding your Moen T2701BN Level Posi-Temp Valve Trim Kit, please contact Moen customer support:
- Webalan: www.moen.com
- Telefon: Moen'e bakın. webbölgesel iletişim numaraları için site.
Please have your model number (T2701BN) and date of purchase available when contacting support.
