1. Ürün Bittiview
The Danfoss Aveo™ 015G4290 is a premium-quality, non-electric thermostatic operator designed for mounting onto Danfoss RA radiator valves. This device utilizes unique gas-filled technology to provide fast and precise temperature control, helping to regulate individual room temperatures by modulating the supply of hot water or low-pressure steam through the radiator. Its streamlined design is suitable for various heating systems and applications, particularly those requiring a small P-band (1K) for optimal performance.
Temel özellikler şunlardır:
- Gas-filled Technology: Offers the world's fastest reacting self-acting thermostat, providing up to 2% additional energy savings compared to conventional liquid bellows.
- Zahmetsiz Kurulum: Features a unique click-connection system that requires no tools. Simply click and turn for immediate operation without calibration or adjustments.
- Intuitive Temperature Control: A valve-mounted thermostatic sensor with a tactile dial allows for precise temperature setting, with each click corresponding to a 1 °F increment.
- Don Koruması: Includes a frost stat setting to prevent pipes from freezing when the room temperature drops too low.
2. Güvenlik Bilgileri
Please read this instruction manual carefully before installation and operation. Retain this manual for future reference.
- Ensure the heating system is depressurized and cooled before attempting installation or maintenance.
- Installation should be performed by qualified personnel if you are unsure about any steps.
- Do not attempt to modify the product. Use only genuine Danfoss replacement parts if necessary.
- Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya diğer üreme zararlarına neden olduğu bilinen kimyasallar içerir. Daha fazla bilgi için şu adresi ziyaret edin: www.P65Uyarılar.ca.gov.
3. Paket İçeriği
Tüm bileşenlerin mevcut olduğunu doğrulayın:
- Danfoss Aveo™ 015G4290 Thermostatic Radiator Operator
- Kullanım Kılavuzu
Image 3.1: The Danfoss Aveo™ 015G4290 thermostatic operator shown in its retail packaging.
4. Kurulum (Setup)
The Danfoss Aveo™ 015G4290 thermostatic operator is designed for easy, tool-free installation onto existing Danfoss RA radiator valves.
- Vanayı Hazırlayın: Ensure the existing radiator valve is clean and free from debris. If replacing an old operator, remove it by unscrewing or unclipping it from the valve body.
- Align the Operator: Position the Aveo™ operator over the Danfoss RA valve. The connection type is RA-click, designed for a secure fit.
- Click and Turn: Push the operator onto the valve until you hear a distinct 'click'. Then, turn the operator clockwise until it is firmly seated. No additional tools or calibration are required. The thermostatic operator will begin functioning immediately.
Image 4.1: A hand demonstrating the simple click-and-turn installation of the Danfoss Aveo™ thermostatic operator onto a radiator valve.
Image 4.2: The Danfoss Aveo™ thermostatic operator shown fully installed on a radiator valve, connected to a radiator.
5. Operasyon
The Danfoss Aveo™ operator allows for precise and intuitive temperature control within a room.
Resim 5.1: Yakın çekim view of the Danfoss Aveo™ operator's dial, showing temperature settings from 1 to 5 and the frost protection symbol.
- Sıcaklık Ayarı: Rotate the dial on the operator to select your desired room temperature. The dial features tactile feedback, with each click representing approximately a 1 °F change in the set temperature.
- Sıcaklık Ölçeği: The dial typically features numerical settings from 1 to 5, corresponding to a temperature range of approximately 45 °F to 82 °F. Consult the table below for approximate temperature equivalents.
- Don Koruması: Turn the dial to the '*' (snowflake) symbol for frost protection. In this setting, the valve will open only if the room temperature drops below approximately 45 °F (7 °C) to prevent freezing.
Approximate Temperature Settings
| Arama Ayarı | Approximate Temperature (°F) | Approximate Temperature (°C) |
|---|---|---|
| * (Frost Protection) | 45 °F | 7 °C |
| 1 | 57 °F | 14 °C |
| 2 | 63 °F | 17 °C |
| 3 | 68 °F | 20 °C |
| 4 | 73 °F | 23 °C |
| 5 | 82 °F | 26 °C |
Video 5.2: A demonstration of adjusting the Danfoss thermostatic radiator valve. The video highlights the ease of turning the dial and the clear setting indicators, including the frost protection feature.
6. Bakım
The Danfoss Aveo™ 015G4290 thermostatic operator is designed for minimal maintenance.
- Temizlik: Wipe the exterior of the operator with a soft, damp Bez. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar cilaya zarar verebilir.
- No Calibration Required: The gas-filled sensor does not require periodic calibration or adjustments after initial installation.
- Denetleme: Periodically check for any signs of damage or loose connections. If any issues are observed, refer to the troubleshooting section or contact support.
7. Sorun Giderme
If you encounter issues with your Danfoss Aveo™ thermostatic operator, refer to the following common problems and solutions:
- Radyatör Isıtmıyor:
- Ensure the dial is set to a temperature higher than the current room temperature.
- Check that the operator is securely attached to the radiator valve. A loose connection can prevent proper operation.
- Verify that the main heating system is operational and supplying hot water to the radiator.
- Room is Too Hot/Cold (despite setting):
- Confirm the operator is not obstructed by curtains, furniture, or other objects that could interfere with its ability to sense room temperature accurately.
- Ensure the operator is not exposed to direct sunlight or drafts, which can affect its temperature readings.
- Adjust the dial incrementally to find the optimal setting for your comfort.
- Difficulty Turning the Dial:
- The dial should turn smoothly with tactile clicks. If it feels stiff, check for any physical obstructions.
- Do not force the dial. If resistance persists, the internal mechanism may be damaged, and the unit may need replacement.
If these steps do not resolve the issue, please contact Danfoss customer support.
8. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | 015G4290 |
| Marka | Danfoss |
| Malzeme | Pirinç, Paslanmaz Çelik (iç bileşenler) |
| Renk | Beyaz |
| Boyutlar (U x G x Y) | 3.35 x 2.44 x 2.17 inç |
| Ürün Ağırlığı | 5.9 ons |
| Sensör Tipi | Dahili sensör |
| Sensör Ortamı | Gaz |
| Bağlantı Türü | RA-click |
| Sensor Setting Temperature Range | 45 °F ila 82 °F (7 °C ila 26 °C) |
| Piller Gerekli | HAYIR |
| Özel Özellikler | Tactile feedback for improved user experience |
Image 8.1: An internal diagram illustrating the components of the Danfoss Aveo™ thermostatic operator, including the gas-filled bellow and setting mechanism.
9. Garanti ve Destek
Garanti bilgileri ve teknik destek için lütfen resmi Danfoss web sitesine bakın. website or contact Danfoss customer service directly. Keep your purchase receipt as proof of purchase.
You can visit the official Danfoss store for more information: Amazon'daki Danfoss Mağazası
