Kılavuzlar+

Codelocks CL1005

Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

Model: CL1005

giriiş

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Codelocks CL1005 Standard Vertical Cabinet Lock

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

Kurulum ve Yükleme

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

Paket İçeriği:

  • CL1005 Lock Body
  • Montaj cıvataları
  • Kurulum Şablonu
  • 2 x AAA Pil
  • Cam (pre-installed or separate)

Kurulum Adımları:

  1. Kapıyı Hazırlayın: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
  2. Kilit gövdesini takın: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
  3. Güvenli Kilit Gövdesi: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
  4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
  5. Pilleri Takın: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
  6. Test İşlemi: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

Kullanım Talimatları

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Kilidin Açılması:

  1. 4-6 haneli kullanıcı kodunuzu giriniz.
  2. The lock will emit a confirmation tone and the LED will flash green.
  3. Turn the knob to the unlocked position.
  4. Dolap kapağını açın.

Kapatma ve Kilitleme:

  1. Dolap kapısını kapatın.
  2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

Bakım

Pil Değişimi:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

  1. Open the battery compartment cover on the back of the lock.
  2. Eski pilleri çıkarın.
  3. Insert new 2 x AAA batteries, ensuring correct polarity.
  4. Pil bölmesi kapağını sıkıca kapatın.

Temizlik:

Kilidin dış yüzeyini yumuşak bir bezle temizleyin.amp Bez. Aşındırıcı temizleyiciler, çözücüler veya sert kimyasallar kullanmaktan kaçının, çünkü bunlar yüzeye ve elektronik bileşenlere zarar verebilir.

Sorun giderme

SorunOlası NedenÇözüm
Lock does not respond to code entry.
  • Yanlış kod girildi.
  • Piller bitmiş veya azalmış.
  • Tuş takımı arızalı.
  • Ensure the correct code is entered.
  • Replace batteries (refer to Maintenance section).
  • Use 9V battery override if necessary.
  • Sorun devam ederse müşteri desteğiyle iletişime geçin.
Lock opens but does not stay locked.
  • Cam not properly aligned or installed.
  • Obstruction preventing cam engagement.
  • Check cam installation and alignment.
  • Ensure no objects are blocking the cam's movement.
Lock emits warning beeps/flashes.Pil gücü düşük.Replace the 2 x AAA batteries immediately.

Özellikler

  • Modeli: CL1005
  • Marka: Codelocks
  • Kilit Tipi: Keypad, Keyless
  • Özellik: Anahtarsız giriş
  • Güç: 2 x AAA pil (ürünle verilir)
  • Pil Ömrü: Approximately 15,000 openings
  • Kapı Kalınlığı: 1/2 inçe (12.7 mm) kadar
  • Namlu Boyutu: 5/8 inch (15.8 mm) threaded
  • Boyutlar (U x G x Y): 6 x 2.5 x 1.5 inç (152 x 63.5 x 38.1 mm)
  • Ağırlık: 16 ons (0.45 kg)
  • Sona ermek: Silver Grey (Painted)
  • Kontrol Yöntemi: Dokunmak
  • Stil: Modern

Garanti ve Destek

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webSite üzerinden veya müşteri hizmetleri departmanıyla iletişime geçin. Satın alma belgenizi saklayın.

Codelocks Official Webalan: www.codelocks.com