Honeywell Home D142 Atlanta Mechanical Doorbell Instruction Manual

giriiş

The Honeywell Home D142 Atlanta Mechanical Doorbell offers a traditional and reliable solution for your home's entryway. This doorbell features a modern, compact design and provides two distinct electromechanical melodies at an 80dB sound level. It can be powered either by batteries or an external transformer, offering flexible installation options. This manual provides essential information for the proper setup, operation, and maintenance of your D142 doorbell.

Kurulum ve Yükleme

Before installation, ensure all components are present. Fixings are included with the doorbell for mounting.

Güç Seçenekleri:

The D142 doorbell supports two power methods:

1. Pil Gücü: Requires 4 x 1.5V AA batteries.
2. Transformer Power: Connects to an external transformer providing 8-16V AC. Compatible with Honeywell Home D753 or D780 transformers.

Kurulum Adımları:

1. Open the Doorbell Unit: Carefully open the doorbell casing as indicated in the diagram to access the internal components.
2. Güç Kaynağını Seçin:
   • For Battery Power: Insert 4 x 1.5V AA batteries into the internal battery holder, ensuring correct polarity.
   • For Transformer Power: Wire the doorbell to an 8-16V AC transformer. Ensure the transformer is rated for 50Hz and provides sufficient power (e.g., 8V 7W or 16V 28W). Connect the wires securely to the designated terminals.
3. Kapı zilini monte edin: Use the provided fixings to securely mount the doorbell in your desired location.
4. Connect Push Button: Connect your doorbell push button to the appropriate terminals on the D142 unit.

This diagram illustrates the two primary methods for powering the Honeywell D142 Atlanta Mechanical Doorbell. Method 1 details the installation of four 1.5V AA batteries into the internal battery holder. Method 2 shows wiring the doorbell to an external transformer, compatible with 8-16V AC power sources, such as the Honeywell Home D753 or D780 transformers. The diagram also indicates the doorbell's power requirements (50Hz, 8V 7W, 16V 28W) and recycling symbols.

Kullanım Talimatları

Once installed and powered, your Honeywell Home D142 Atlanta Mechanical Doorbell is ready for use. When the connected push button is pressed, the doorbell will sound one of its two electromechanical melodies. The sound output is approximately 80dB.

Bakım

• Pil Değişimi: If using battery power, replace all four 1.5V AA batteries when the sound becomes weak or stops. Always replace with new batteries of the same type.
• Temizlik: Clean the exterior of the doorbell with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Çevresel Hususlar: This appliance should be recycled responsibly. Do not dispose of with household waste. Refer to local regulations for proper disposal of electronic waste and batteries.

Sorun giderme

• Doorbell does not sound:
  • If battery-powered, check if batteries are inserted correctly and are not depleted. Replace if necessary.
  • If transformer-powered, ensure the transformer is receiving power and is correctly wired to the doorbell.
  • Check all wiring connections from the push button to the doorbell unit for looseness or damage.
  • Ensure the push button is functioning correctly.
• Sound is weak or distorted:
  • Pil gücü kullanılıyorsa pilleri değiştirin.
  • Verify the transformer output voltage, belirtilen 8-16V aralığındadır.

Özellikler

Garanti ve Destek

The Honeywell Home D142 Atlanta Mechanical Doorbell comes with a two-year guarantee from the date of purchase. For technical support, warranty claims, or further assistance, please contact Honeywell Home customer service or visit the official Resideo websitede www.resisideo.com.

Üretici: Bal kuyusu
İngiltere İthalatçısı: Ademco 1 LTD