Winco Digital Timer TIM-85D Instruction Manual

giriiş

This manual provides detailed instructions for the setup, operation, and maintenance of your Winco Digital Timer, model TIM-85D. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Şekil 1: Ön view of the Winco Digital Timer TIM-85D, showing the display, HOUR, MIN, START/STOP, and RESET buttons.

Kurmak

1. Pil Kurulumu

1. Zamanlayıcının arka tarafında bulunan pil bölmesini bulun.
2. Pil bölmesinin kapağını açın.
3. Insert one AAA battery (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Pil bölmesi kapağını sıkıca kapatın.

2. İlk Güç Açma

The timer should automatically power on once the battery is correctly installed. The display will show '00:00'.

Figure 2: The Winco Digital Timer TIM-85D shown in hand, illustrating its compact dimensions of approximately 3.25 x 2.38 x 0.75 inches.

Kullanım Talimatları

1. Setting the Timer (Countdown)

1. Basın SAAT button to set the desired hours. Each press increases the hour by one. Hold to rapidly advance.
2. Basın DAKİKA button to set the desired minutes. Each press increases the minute by one. Hold to rapidly advance.
3. To clear the set time, press the SIFIRLAMA düğme.

2. Zamanlayıcıyı Başlatma ve Durdurma

1. After setting the desired time, press the BAŞLAT/DURDUR Geri sayımı başlatmak için düğmeye basın.
2. Geri sayımı duraklatmak için tuşuna basın BAŞLAT/DURDUR button again. The display will flash.
3. Devam etmek için tuşuna basın BAŞLAT/DURDUR Bir kez daha.
4. When the countdown reaches zero, an alarm will sound. Press any button to silence the alarm.

3. Count-Up Function (Stopwatch)

1. Ensure the timer display is at '00:00' (press SIFIRLAMA Eğer gerekliyse).
2. Basın BAŞLAT/DURDUR button. The timer will begin counting up from '00:00'.
3. To pause the count-up, press BAŞLAT/DURDUR.
4. To reset the count-up timer to '00:00', press SIFIRLAMA duraklatılmışken.

4. Alarm and Silence Switch

The Winco Digital Timer features an audible alarm. Some models may include a silence switch, typically located on the side or back, to disable the alarm sound. Refer to your specific unit for this feature.

5. Additional Functions (Refer to Video)

The following video demonstrates various functions of a similar digital timer, including setting time, count-up/down, 1/100 second count, day count, and clock display. While the visual appearance of the timer in the video may differ from the Winco TIM-85D, the operational principles for these functions are generally applicable.

Bakım

1. Temizlik

Zamanlayıcıyı yumuşak bir bezle silin.amp bez. Aşındırıcı temizleyiciler kullanmayın veya cihazı suya batırmayın.

2. Pil Değişimi

When the display dims or the timer functions erratically, replace the AAA battery. Follow the battery installation steps outlined in the Setup section.

Sorun giderme

• Zamanlayıcı açılmıyor: Ensure the battery is correctly installed with proper polarity and is not depleted. Replace the battery if necessary.
• Ekran loş veya boş: Pili değiştirin.
• Alarm çalmıyor: Check if your model has a silence switch and ensure it is in the 'on' or 'audible' position. Ensure the volume is not set to minimum if adjustable.
• Tuşlar tepki vermiyor: Remove and reinsert the battery to perform a soft reset. If the issue persists, the unit may require service.

Özellikler

Garanti ve Destek

Garanti Bilgileri

Winco products are designed for durability and performance. For specific warranty details, please refer to the packaging or contact Winco customer service. Keep your purchase receipt as proof of purchase.

Müşteri Desteği

For further assistance, technical support, or to inquire about replacement parts, please contact Winco customer service. Contact information can typically be found on the product packaging or the official Winco webalan.