Dickson TM320 Temperature and Humidity Data Logger

1. Giriş

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• Kullanımı Kolay: Intuitive interface for straightforward operation.

2. Güvenlik Bilgileri

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Sadece belirtilen güç kaynaklarını ve aksesuarları kullanın.
• Cihazı kendiniz açmaya veya onarmaya çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
• Çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Dickson TM320 Data Logger
• Kullanım Kılavuzu (bu belge)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Ürün Bittiview

Şekil 4.1: Ön View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Şekil 4.2: Yan View Limanlarla. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Şekil 4.3: Geri View. Displays the battery compartment cover and keyhole slots for wall mounting.

Şekil 4.4: Üst View. Shows the slot for inserting an SD card for data storage and transfer.

5. Kurulum

5.1. Pil Kurulumu

1. Cihazın arka tarafında bulunan pil bölmesini bulun (Şekil 4.3'e bakınız).
2. Pil kapağını kaydırarak açın.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Pil kapağını sıkıca kapatın.

5.2. İlk Açılış

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Cihazın Montajı

The TM320 can be placed on a flat surface or mounted on a wall:

• Yüzey Yerleşimi: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Duvara Montaj: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Operasyon

6.1. Ekranı Anlama

The jumbo display provides real-time information:

• Mevcut Okuma: Shows the live temperature or humidity value.
• Birimler: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Pil Göstergesi: Kalan pil ömrünü gösterir.
• CH (Kanal): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Düğme Fonksiyonları

• MIN/MAX Düğmesi: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Alarm butonu: Basın view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• KAYDET Düğmesi: Press to manually save a data point.

6.3. Veri Kaydı

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Alarmları Ayarlama

The device features audio/visual alarms for out-of-range conditions.

1. Basılı tutun ALARM button until the alarm setting mode is activated.
2. Kullanın EN AZ EN ÇOK button to navigate between temperature and humidity alarm settings (high/low).
3. Kullanın KAYDETMEK button to adjust the alarm threshold values.
4. Basmak ALARM Tekrar onaylamak ve ayar modundan çıkmak için.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Bakım

7.1. Temizlik

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Pil Değişimi

Ekranda düşük pil göstergesi belirdiğinde pilleri değiştirin. 5.1 bölümündeki pil takma adımlarını izleyin.

7.3. Depolama

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Webalan: www.dicksonlogger.com