DeVilbiss 802342 StartingLine HVLP Yerçekimi Püskürtme Tabancası Seti Kullanım Kılavuzu

giriiş

The DeVilbiss 802342 StartingLine HVLP Gravity Spray Gun Kit is a comprehensive system designed for auto painting and touch-up applications. This kit includes a full-size HVLP spray gun with a 1.3mm fluid tip, a mini HVLP detail gun with a 1.0mm fluid tip, an air adjusting valve, and a 1.8mm primer set-up. All components are conveniently organized within a durable molded case, providing a complete solution for various painting needs.

Güvenlik Bilgileri

Always prioritize safety when operating spray painting equipment. Failure to follow safety guidelines can result in serious injury or property damage.

• Havalandırma: Use in a well-ventilated area to prevent the accumulation of hazardous fumes. If adequate ventilation is not available, use appropriate respiratory protection.
• Kişisel Koruyucu Donanım (KKD): Always wear appropriate PPE, including safety glasses or goggles, gloves, and a respirator suitable for paint fumes.
• Yanıcı malzemeler: Many paints and solvents are flammable. Keep away from open flames, sparks, and other ignition sources. Do not smoke while operating the spray gun.
• Basınç Güvenliği: Never exceed the maximum recommended air pressure for the spray gun. Always release air pressure from the system before performing maintenance or cleaning.
• Kimyasal Maruziyet: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya diğer üreme zararlarına neden olduğu bilinen kurşun dahil kimyasallara maruz kalmanıza neden olabilir. Daha fazla bilgi için şuraya gidin: www.P65Uyarılar.ca.gov.
• Elektriksel Güvenlik: Ensure all electrical connections for air compressors or other equipment are properly grounded and in good condition.
• Çocuklar ve Evcil Hayvanlar: Keep children and pets away from the work area and equipment.

Ürün Bittiview ve Bileşenler

The DeVilbiss 802342 kit provides a versatile set of tools for various painting tasks. Familiarize yourself with the components before use.

Figure 1: DeVilbiss 802342 StartingLine HVLP Gravity Spray Gun Kit, showing the full-size HVLP spray gun, mini HVLP detail gun, air adjusting valve, and various cleaning accessories neatly organized in a molded case.

Figure 2: Contents of the DeVilbiss StartingLine Spray Gun Kit, including two spray guns, fluid cups, and cleaning tools.

Şekil 3: Başka bir view of the DeVilbiss StartingLine Spray Gun Kit components, highlighting the full-size and mini spray guns along with accessories.

Kit İçeriği:

• Full-Size HVLP Gravity Spray Gun: Equipped with a 1.3mm fluid tip, suitable for general painting applications.
• Mini HVLP Detail Gun: Features a 1.0mm fluid tip, ideal for touch-ups and fine detail work.
• Air Adjusting Valve: For precise control over air pressure at the gun.
• 1.8mm Primer Set-up: An additional fluid tip and needle for spraying thicker materials like primers.
• Molded Case: Provides organized storage and protection for the kit components.
• Temizlik Aksesuarları: Various brushes and tools for proper maintenance.

Kurmak

1. Bileşenleri Paketinden Çıkarın: Carefully remove all items from the molded case and inspect for any damage.
2. Select Fluid Tip: Choose the appropriate fluid tip (1.0mm, 1.3mm, or 1.8mm) based on the viscosity of the material you intend to spray. Ensure the corresponding needle and air cap are installed.
3. Sıvı kabını takın: Securely attach the gravity-feed fluid cup to the top of the spray gun.
4. Hava Beslemesini Bağlayın: Connect the air adjusting valve to the spray gun's air inlet, then connect your air hose from the compressor to the air adjusting valve. Ensure all connections are tight to prevent air leaks.
5. İlk Temizlik: Before first use, clean the spray gun thoroughly with an appropriate cleaning solvent to remove any manufacturing residues.

Kullanım Talimatları

1. Malzemeyi Hazırlayın: Mix and thin your paint or coating material according to the manufacturer's instructions. Strain the material to remove any particles that could clog the gun.
2. Sıvı kabını doldurun: Pour the prepared material into the gravity-feed fluid cup. Do not overfill.
3. Set Air Pressure: With the air adjusting valve, set the air pressure at the gun to the recommended PSI for your material. For HVLP guns, this is typically between 10-30 PSI (Maximum Pressure: 30 PSI).
4. Püskürtme Desenini Ayarlayın:
   • Fan Control Knob: Adjust this knob to change the width of the spray pattern, from a narrow round pattern to a wide fan.
   • Fluid Control Knob: Controls the amount of material flowing through the gun. Turn clockwise to decrease flow, counter-clockwise to increase.
5. Test Spreyi: Always perform a test spray on a piece of scrap material to verify the spray pattern and material atomization before applying to your actual workpiece. Adjust settings as needed.
6. Püskürtme Tekniği:
   • Maintain a consistent distance (typically 6-8 inches) from the surface.
   • Move the gun at a steady, even speed, overlapping each pass by about 50%.
   • Trigger the gun fully at the beginning of each pass and release at the end to avoid excessive material buildup.

Bakım

Proper cleaning and maintenance are essential for the longevity and optimal performance of your spray guns.

1. Acil Temizlik: Clean the spray gun immediately after each use. Do not allow paint to dry inside the gun.
2. Boş Sıvı Kabı: Sıvı kabında kalan tüm malzemeyi boşaltın.
3. Flush Gun: Pour a small amount of appropriate cleaning solvent into the cup and spray it through the gun until clear solvent emerges.
4. Sökün ve Temizleyin:
   • Remove the air cap, fluid tip, and needle.
   • Use the provided cleaning brushes and solvent to thoroughly clean all internal and external parts. Pay special attention to the air cap holes and fluid passages.
   • Do not use metal objects to clean the fluid tip or air cap holes, as this can damage them.
5. Yağlama: Lightly lubricate the needle packing and air valve packing with a non-silicone lubricant designed for spray guns.
6. Reassembly and Storage: Reassemble the gun carefully. Store the clean and dry spray gun in its molded case to protect it from dust and damage.

Sorun giderme

Bu bölüm karşılaşabileceğiniz yaygın sorunları ele alıyor ve olası çözümler sunuyor.

Özellikler

Garanti ve Destek

For detailed warranty information, technical support, or to purchase replacement parts, please refer to the official DeVilbiss websitesine gidin veya müşteri hizmetleriyle iletişime geçin.

An official Installation Manual (PDF) is available for further reference:

• Kurulum Kılavuzunu İndirin (PDF)