Saris Bike Bunk 2-Bike Storage Gravity Stand Instruction Manual

1. Giriş

The Saris Bike Bunk Gravity Stand provides a convenient and space-saving solution for storing up to two bicycles. Its design utilizes gravity to lean against a wall, eliminating the need for drilling or permanent mounting. The stand features adjustable arms to accommodate various bike frame sizes and includes protective elements to prevent damage to both your bikes and your home surfaces.

2. Güvenlik Bilgileri

• Ağırlık Kapasitesi: This stand is designed to hold a maximum total weight of 80 lbs (approximately 40 lbs per bike). Do not exceed this weight limit.
• Atama: Ensure the stand is placed on a stable, level surface and leans securely against a sturdy wall.
• Bisiklet Yerleşimi: Always ensure bikes are securely seated on the adjustable arms. Distribute weight evenly if possible.
• Çocuklar ve Evcil Hayvanlar: Keep children and pets away from the stand, especially during bike placement or removal.
• Öneri 65 Uyarısı: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya üremeyle ilgili diğer zararlara neden olduğu bilinen kimyasallar içerebilir.

3. Paket İçeriği

Montaj işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Main vertical support pole(s)
• Temel ünite
• Adjustable bike support arms (2 pairs)
• Cushioned pads for wall and floor contact
• Montaj donanımı (vidalar, cıvatalar vb.)
• Kullanım kılavuzu

4. Kurulum Talimatları

The Saris Bike Bunk is designed for quick and tool-free setup, requiring no drilling into walls.

1. Tabanı birleştirin: Connect the base components to the bottom of the main vertical support pole(s) using the provided hardware. Ensure all connections are secure.
2. Standı Konumlandırın: Place the assembled stand on a level floor surface, leaning it against a sturdy wall. The cushioned pads on the base and the top of the pole should make contact with the floor and wall, respectively, to prevent damage.
3. Destek kollarını takın: Slide the adjustable bike support arms onto the vertical pole. The arms are designed to move up and down freely for height adjustment.
4. Adjust Arm Height: Before placing bikes, adjust the height of each pair of arms to best suit your bicycle frames. The arms should be positioned so that the bike's top tube rests horizontally or with a slight downward slope towards the rear wheel for stability.
5. Güvenli Silahlar: Once the desired height is achieved, tighten the locking mechanisms on the arms to secure them in place.

5. Kullanım Talimatları

To place a bicycle on the Saris Bike Bunk:

1. Lift the bicycle and position its top tube onto the protective sleeves of the support arms.
2. Ensure the bike is balanced and stable on the arms. The rubberized sleeves are designed to prevent scratching the bike frame.
3. For optimal stability, especially with bikes that have angled top tubes, adjust the arms to ensure the bike rests as level as possible.

To remove a bicycle, simply lift it off the support arms.

Storing Four Bikes (Optional)

Two Saris Bike Bunk stands can be secured back-to-back to create a freestanding unit capable of storing up to four bicycles. This configuration maximizes storage in a compact footprint.

6. Bakım

• Temizlik: Standı reklamla silin.amp cloth as needed to remove dust and dirt. Avoid abrasive cleaners.
• Denetleme: Tüm bağlantıların ve donanımların sıkı ve güvenli kaldığından emin olmak için periyodik olarak kontrol edin.
• Koruyucu Pedler: Inspect the cushioned pads on the arms, base, and wall contact points for wear. Replace if necessary to maintain protection.

7. Sorun Giderme

• Ayakta Dengesizlik: Ensure the stand is on a level surface and leaning firmly against a wall. Verify all assembly hardware is tightened.
• Bike Slipping/Unstable: Re-adjust the height and angle of the support arms to better fit the bike's top tube. Bikes with significantly angled top tubes may require careful positioning. Ensure the bike's weight does not exceed the arm's capacity.
• Arms Bending: If arms show signs of bending, reduce the weight of the bicycle being stored. Ensure the total weight does not exceed 40 lbs per arm or 80 lbs total for the stand.

8. Özellikler

9. Garanti ve Destek

The Saris Bike Bunk 2-Bike Storage Gravity Stand comes with a Ömür Boyu Garanti. For warranty claims, technical support, or any questions regarding your product, please contact Saris customer service directly through their official websatın alma belgelerinizle birlikte verilen site veya iletişim bilgileri.