Viper 479V Responder Remote Instruction Manual

1. Ürün Bittiview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Temel Özellikler:

• Çift Yönlü İletişim: Komutlar başarıyla gönderildiğinde görsel ve işitsel onay sağlar.
• Genişletilmiş Menzil: Operates with up to 1/2 mile range.
• LCD Ekran: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Sistem Uyumluluğu

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Viper 542V
• Viper 434V
• Viper 554V
• Viper 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Aracı Hazırlayın:
   • Sürücü tarafındaki kapıyı açın.
   • Anahtarı kontağa takın.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Programlama Moduna Girin:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and tutmak it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and tutmak it. The car's siren will chirp once.
4. Program Remote: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Programlama Modundan Çık: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Uzaktan Test: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Uzaktan Kumandanın Kullanımı

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Temel Fonksiyonlar:

• Kilit: Press the lock button to arm your vehicle's security system and lock the doors.
• Kilidini aç: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Uzaktan başlatma: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Yardımcı Fonksiyonlar: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Bakım

Pil Değişimi:

Viper 479V uzaktan kumandası şunları gerektirir: iki adet AAA pil for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Uzaktan kumandanın arkasındaki pil bölmesi kapağını bulun.
2. Bölmeyi açmak için kapağı dikkatlice kaydırın veya klipsini açın.
3. Eski AAA pilleri çıkarın.
4. İki adet yeni AAA pil takın ve kutupların doğru (+/-) olduğundan emin olun.
5. Pil bölmesi kapağını güvenli bir şekilde yerine takın.

Bakım ve Kullanım:

• Suya Maruz Kalmaktan Kaçının: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Düşmelerden Koruyun: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Nazikçe Temizleyin: Kumandayı temizlemek için yumuşak, kuru bir bez kullanın. Sert kimyasallardan veya aşındırıcı malzemelerden kaçının.
• Sıcaklık Uç Noktaları: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Sorun Giderme

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• Uzaktan Kumanda Yanıt Vermiyor:
  • AAA pilleri kontrol edin ve değiştirin.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Azaltılmış Menzil:
  • Pilleri değiştirin.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• LCD Ekran Sorunları:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• Düğmeler Çalışmıyor:
  • Kumandanın temiz olduğundan ve düğmelerin etrafında herhangi bir kir veya toz bulunmadığından emin olun.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Özellikler

8. Garanti Bilgileri

The Viper 479V Responder Remote comes with a 1 Yıllık Üretici GarantisiBu garanti, normal kullanım koşullarındaki malzeme ve işçilik kusurlarını kapsar. Garanti talepleriniz için lütfen satın alma belgenizi saklayın.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Destek

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Viper Resmi Webalan: Visit the official Viper webÜrün güncellemeleri, sıkça sorulan sorular ve ek destek belgeleri için site.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Müşteri Hizmetleri: Refer to your product packaging or the Viper webMüşteri hizmetleri iletişim bilgileri için site.