1. Giriş
The MXR Distortion+ is a classic guitar effects pedal known for its distinctive distortion sounds. This compact unit is designed to deliver a range of tones from subtle overdrive to classic hard rock distortion. Its germanium-powered, soft-clipped distortion circuit has been a staple on countless recordings, offering a unique sonic character.
Temel Özellikler:
- Germanium-powered, soft-clipped distortion
- Classic 70s distortion
- Classic early ’80s hard rock tone
- Kompakt ve dayanıklı tasarım
2. Kurulum
Before connecting your MXR Distortion+ pedal, ensure your amplifier is turned off. This prevents any potential damage to your equipment.
Bağlantılar:
- Gitarınızı ağa bağlayın GİRİŞ Pedalların sağ tarafındaki jakı, standart 1/4 inçlik bir enstrüman kablosu kullanarak bağlayın.
- Bağlan ÇIKTI Pedalın sol tarafındaki jakı sizin amplifier's input using another 1/4-inch instrument cable.
Pedala Güç Verme:
The MXR Distortion+ can be powered by a 9V battery or an optional 9V DC power adapter (center negative).
- Pil Montajı: To install a 9V battery, remove the bottom plate of the pedal by unscrewing the four screws. Connect the battery to the clip and place it inside the enclosure before reattaching the bottom plate.
- Güç Adaptörü: Connect a 9V DC power adapter (not included) to the power jack on the side of the pedal.
Resim: Yan view of the MXR Distortion+ pedal, highlighting the input, output, and 9V power jacks.
Resim: Alt view of the MXR Distortion+ pedal, showing the four screws that secure the battery compartment.
3. Kontroller
The MXR Distortion+ features two primary control knobs and a footswitch for activation.
Resim: Üst view of the MXR Distortion+ pedal, clearly showing the 'Output' and 'Distortion' control knobs.
- ÇIKIŞ: This knob controls the overall output volume of the effect. Turn clockwise to increase volume, counter-clockwise to decrease.
- ÇARPITMA: This knob adjusts the amount of distortion applied to your signal. Turn clockwise for more distortion, counter-clockwise for less.
- AYAK PEDALI: Toggles the effect on/off. The LED illuminates when the effect is active.
4. Çalıştırma
The MXR Distortion+ is straightforward to operate, allowing you to quickly dial in a variety of distorted tones.
- Classic Blues Tones: Set the DISTORTION control low (e.g., 9 o'clock to 12 o'clock) and adjust the OUTPUT knob to drive the front end of your amplifier. This will produce a warm, overdriven blues tone.
- Early '80s Hard Rock: Max out the DISTORTION knob (e.g., 3 o'clock to full clockwise) for a powerful, saturated hard rock tone. Adjust OUTPUT to match your desired volume.
- Subtle Boost/Overdrive: For a cleaner boost with a touch of grit, set DISTORTION very low and OUTPUT to unity gain or slightly above.
Demonstration Videos (for related MXR pedals):
Video: MXR Custom Badass Modified Overdrive, 78 Distortion M77, M78. This video demonstrates the sound of related MXR distortion and overdrive pedals.
Video: MXR Sugar Drive Pedal M294. This video demonstrates the sound of a related MXR overdrive pedal.
5. Özellikler
| Model Numarası | M104 |
| Ürün Ağırlığı | 1 Pound |
| Ürün Boyutları | 5.5"U x 2.5"G x 4.5"Y |
| Gövde Malzemesi | Germanium, Plastic |
| Renk | Sarı |
| Güç Kaynağı | Pil ile çalışır (1 x 9V pil gereklidir) |
| Cilttage | 9.0V |
| Sinyal Biçimi | Analog |
| Bağlayıcı Türü | 1/4 inç ses |
6. Bakım
- Temizlik: Pedalı temizlemek için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Depolamak: Pedalı kuru bir ortamda, aşırı sıcaklıklardan ve doğrudan güneş ışığından uzakta saklayın.
- Pil Ömrü: If using a battery, disconnect the input cable when not in use to conserve battery life. Remove the battery if the pedal will not be used for an extended period.
7. Sorun Giderme
- Ses Yok:
- Tüm kablo bağlantılarını kontrol edin (gitar girişe, çıkış da...) amp).
- Ensure the pedal is receiving power (check battery or power adapter).
- Verify your guitar and ampAmplifikatörler doğru şekilde çalışıyor.
- Weak or Distorted Sound (unexpectedly):
- Replace the 9V battery if it's low.
- Ensure the power adapter meets the 9V DC (center negative) specification.
- Adjust the OUTPUT and DISTORTION knobs to find your desired tone.
8. Garanti ve Destek
This product is covered by the manufacturer's warranty. For detailed warranty information or technical support, please refer to the official MXR webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi garanti talepleriniz için saklayın.
