1. Önemli Güvenlik Bilgileri
Lütfen kurulum işlemine başlamadan önce tüm talimatları okuyun ve anlayın. Aksi takdirde elektrik çarpması, yangın veya ölümcül olabilecek diğer yaralanmalar ya da maddi hasar meydana gelebilir.
- UYARI: Elektrik çarpması riski vardır. Kurulum veya bakım işlemlerinden önce devre kesiciden veya sigorta kutusundan elektriği kesin.
- Tüm elektrik bağlantıları yerel yönetmeliklere, yönetmeliklere veya Ulusal Elektrik Koduna (NEC) uygun olmalıdır. Elektrik tesisatı bağlantıları konusunda bilgi sahibi değilseniz, yetkili bir elektrikçiye danışın.
- Yalnızca UL/cUL onaylı kablo konektörleri kullanın.
- This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning). Wash hands after handling.
2. Ürün Bittiview
The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.

Şekil 2.1: Ön view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.

Şekil 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.
3. Kurulum ve Kurulum
3.1 Paket İçeriği
Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.
3.2 Ön Kurulum
- Ana devre kesiciden veya sigorta kutusundan elektriği kapatın.
- Carefully unpack the fixture and components.
3.3 Armatürün Montajı
This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.
- Verilen vidaları kullanarak montaj braketini bağlantı kutusuna takın.
- Ensure the bracket is level and securely fastened.
3.4 Elektrik Bağlantıları
Connect the fixture wires to the house wires according to the following:
- Aydınlatma armatüründen gelen siyah kabloyu, bağlantı kutusundan gelen siyah (faz) kabloya bağlayın.
- Aydınlatma armatüründen gelen beyaz kabloyu, bağlantı kutusundan gelen beyaz (nötr) kabloya bağlayın.
- Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
- Secure all connections with UL/cUL listed wire connectors.
3.5 Armatürün Sabitlenmesi
- Tüm kabloları dikkatlice bağlantı kutusuna sokun.
- Align the fixture with the mounting bracket and secure it using the provided screws or nuts.
3.6 Ampul Montajı
This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.

Şekil 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.
- Screw the bulb into the socket until snug. Do not overtighten.
- This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.
3.7 Önerilen Yerleştirme
For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.

Şekil 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.

Şekil 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.
4. Operasyon
Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.
5. Bakım
5.1 Temizlik
Aydınlatma armatürünü temizlemek için, elektriği kapatın ve yumuşak bir bezle silin.amp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
5.2 Ampul Değişimi
Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.
6. Sorun Giderme
- Işık açılmıyor:
- Check that the power is turned on at the circuit breaker.
- Ensure the bulb is securely screwed into the socket and is not burnt out.
- Tüm elektrik bağlantılarının güvenli olduğundan emin olun.
- Inspect for any defective electrical components or wiring.
- Fuse blows or circuit breaker trips:
- Check for crossed wires or short circuits.
- Ampulün ne olduğundan emin oluntage does not exceed the fixture's maximum rating (100W).
7. Özellikler

Şekil 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.
| Özellik | Detay |
|---|---|
| Model Numarası | P5607-31 |
| Marka | İlerleme Aydınlatma |
| Boyutlar (U x G x Y) | 4.5" x 4.5" x 8" (4-9/16" W x 8-5/8" H) |
| Ürün Ağırlığı | 1 pound (16 ons) |
| Malzeme | Alüminyum |
| Bitiş Türü | Clear (Glass) |
| Renk | Siyah |
| Stil | Geleneksel |
| Işık Kaynağı Türü | Akkor lamba (LED ile uyumlu) |
| Ampul Tabanı | E26 (Orta Taban) |
| Maksimum Vattage | 100 Watt |
| Cilttage | 120 Volt |
| Parlaklık | 1600 lumen (with 100W incandescent) |
| Su Direnç Seviyesi | Su geçirmez |
| Montaj Tipi | Protruding (Wall Mount) |
| UPC | 785247560738 |
8. Garanti Bilgileri
This Progress Lighting product is covered by a 1 yıllık Sınırlı Garanti. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.
9. Destek
For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official websitede veya ürün ambalajında yer almamaktadır.





