1. Güvenlik Bilgileri
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Read and understand all instructions before operating this machine.
Genel Güvenlik Kuralları
- Uygun kişisel koruyucu ekipman (KKD) giyin: Always wear safety glasses or goggles, hearing protection, and a dust mask. Heavy-duty gloves are recommended.
- Çalışma alanını temiz ve iyi aydınlatılmış tutun: Dağınık veya karanlık alanlar kazalara davetiye çıkarır.
- Patlayıcı ortamlarda çalıştırmayın: Do not use power tools in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Çocukları ve çevredekileri uzak tutun: Dikkat dağıtıcı şeyler kontrolünüzü kaybetmenize neden olabilir.
- İş parçasını güvenli hale getirin: Her zaman clamp the material firmly before cutting.
- Avoid awkward body positions: Her zaman uygun ayak ve dengeyi koruyun.
- Gücü kesin: Always disconnect the machine from the power source before making adjustments, changing accessories, or performing maintenance.
Specific Cut-Off Machine Safety
- Use correct abrasive wheels: Only use 14-inch abrasive cut-off wheels rated for the machine's RPM.
- Inspect wheel before use: Do not use cracked, chipped, or damaged wheels.
- Ensure wheel guard is in place: Never operate the machine without the wheel guard properly installed and functioning.
- Be aware of sparks and debris: Cutting operations produce sparks and hot debris. Clear the area of flammable materials and ensure bystanders are at a safe distance.
- Allow wheel to reach full speed: Before beginning a cut, allow the abrasive wheel to reach its full operating speed.
2. Ürün Bittiview
The Milwaukee 6175-8 is a 14-inch abrasive cut-off machine designed for efficient and portable cutting of various metal materials. It features a powerful 15 amp motor, a durable cast-iron base, and a spindle lock for convenient blade changes. The pivoting wheel guard enhances safety during operation.
Temel Özellikler
- Güçlü 15 amp motor for demanding cutting tasks.
- Robust cast iron base for stability and durability.
- Spindle lock mechanism for quick and easy abrasive wheel changes.
- Pivoting wheel guard for enhanced user protection.
- Integrated one-piece carrying handle for portability.
- Quick-release locking vise for secure material clamping and angle cutting up to 45 degrees.
Image 2.1: The Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine. This image shows the overall design of the machine, including the motor housing, cutting arm, base, and vise assembly.
3. Kurulum
Paket Açma ve Muayene
- Makineyi ve tüm aksesuarlarını ambalajından dikkatlice çıkarın.
- Inspect the machine for any damage that may have occurred during shipping. If any damage is found, do not operate the machine and contact customer service.
- Verify that all components listed in the packing list are present: cut-off machine, vise, abrasive wheel, and hex wrench.
Çalışma Alanı Hazırlığı
- Place the machine on a stable, level surface capable of supporting its weight and the workpiece.
- Makinenin güvenli çalışması ve malzeme taşınması için makinenin etrafında yeterli boşluk olduğundan emin olun.
- Clear the area of any flammable materials due to sparks generated during cutting.
Abrasive Wheel Installation
- Makinenin güç kaynağından çıkarıldığından emin olun.
- Mil kilitleme düğmesini basılı tutun.
- Using the provided hex wrench, loosen and remove the arbor nut and outer flange.
- Place the new 14-inch abrasive wheel onto the arbor, ensuring it is seated correctly against the inner flange.
- Reinstall the outer flange and arbor nut. Tighten the arbor nut securely while holding the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually rotate the wheel to ensure it spins freely and is properly aligned.
Vise Adjustment
- The quick-release vise allows for rapid clampve amcaampiş parçalarının işlenmesi.
- To adjust for different material sizes, loosen the vise handle and slide the movable jaw to the desired position.
- For angle cuts, the vise can be pivoted up to 45 degrees. Loosen the appropriate bolts on the base, adjust the vise to the desired angle using the angle guide, and then securely tighten the bolts.
4. Kullanım Talimatları
Güç Bağlantısı
- Connect the machine to a standard 120 Volts AC power outlet. Ensure the circuit can handle the 15 amp motor load.
Malzeme Clampinmek
- Place the workpiece firmly against the fence and within the vise jaws.
- Tighten the quick-release vise handle to secure the material. Ensure the material is held firmly and will not shift during the cut.
- The machine can cut pipe up to 5" O.D., bar stock up to 3-5/8", and square stock up to 5".
Kesim Yapmak
- İş parçasının güvenli bir şekilde temizlendiğinden emin olunampve alan temizlendi.
- Lower the cutting arm slightly to ensure the abrasive wheel clears the workpiece.
- Press the ON switch to start the motor. Allow the abrasive wheel to reach its full operating speed of 3900 RPM before beginning the cut.
- Slowly and steadily lower the cutting arm, allowing the abrasive wheel to cut through the material. Do not force the cut; let the wheel do the work.
- Once the cut is complete, release the ON switch and allow the wheel to stop rotating before raising the cutting arm.
- amcaamp İş parçasını alın ve makineden çıkarın.
5. Bakım
Regular maintenance ensures the longevity and safe operation of your Milwaukee cut-off machine. Always disconnect the machine from the power source before performing any maintenance.
Temizlik
- After each use, clean the machine to remove metal dust and debris. Use a brush or compressed air.
- Plastik parçalara zarar verebilecek çözücüler veya sert kimyasallar kullanmayın.
- Keep ventilation openings clear to prevent motor overheating.
Abrasive Wheel Replacement
- Replace abrasive wheels when they become worn down, chipped, or damaged. Refer to the "Abrasive Wheel Installation" section for detailed steps.
Genel Muayene
- Periodically inspect the power cord for damage. If damaged, have it replaced by a qualified service technician.
- Tüm somun, cıvata ve vidaların sıkılığını kontrol edin. Gerektiğinde sıkın.
- Ensure the wheel guard operates freely and returns to its protective position.
- Inspect the vise mechanism for smooth operation and secure clampIng.
6. Sorun Giderme
Bu bölümde, kesme makinenizle karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Makine başlamıyor | Güç kaynağı yok Arızalı güç kablosu Motor overload protection tripped | Elektrik prizini ve devre kesiciyi kontrol edin. Kabloda hasar olup olmadığını kontrol edin; gerekirse değiştirin. Allow motor to cool; reduce load |
| Excessive sparks or smoke during cutting | Dull or incorrect abrasive wheel Forcing the cut Improper material clampinmek | Replace with a new, sharp abrasive wheel Reduce feed pressure; allow wheel to cut at its own pace İş parçasının güvenli bir şekilde kapatıldığından emin olun.amped |
| Yanlış kesimler | Loose workpiece Vise not set correctly Worn abrasive wheel | güvenli bir şekilde clamp iş parçası Check vise angle and tightness Replace the abrasive wheel |
| Makine aşırı titriyor | Gevşek bileşenler Damaged or unbalanced abrasive wheel Unstable work surface | Tüm bağlantı elemanlarını kontrol edin ve sıkın. Inspect and replace abrasive wheel if damaged Ensure machine is on a stable, level surface |
7. Özellikler
Technical specifications for the Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine.
| Özellik | Şartname |
|---|---|
| Model Numarası | 6175-8 |
| Motor Ampöfke | 15 Amps |
| Cilttage | 120 Volt AC |
| Yüksüz RPM | 3900 RPM |
| Bıçak Çapı | 14 inç |
| Arbor Boyutu | 1 inç |
| Maksimum Kesme Açısı | 45 Derece |
| Workpiece Capacity (Pipe O.D.) | 5 inç |
| Workpiece Capacity (Bar Stock) | 3-5/8 İnç |
| Workpiece Capacity (Square Stock) | 5 inç |
| Ürün Ağırlığı | 52.5 Pound |
| Güç Kaynağı | Kablolu Elektrik |
| Özel Özellik | Mil Kilidi |
| Uyumluluk | OSHA |
8. Garanti ve Destek
Garanti Bilgileri
This Milwaukee 6175-8 Abrasive Cut-Off Machine is a reconditioned product. Reconditioned Milwaukee Products are covered by a beş yıllık sınırlı garanti through the Milwaukee factory or an authorized service center. This warranty covers defects in material and workmanship. Please retain your proof of purchase for warranty claims.
Müşteri Desteği
For technical assistance, service, or warranty inquiries, please contact Milwaukee customer support or an authorized Milwaukee service center. Contact information can typically be found on the official Milwaukee websitesinde veya satın alma işleminizle birlikte verilen belgelerde.
