DUMBORC X6F/X6FG 2.4G 6CH Radio Control System Receiver User Manual

1. Giriş

This manual provides detailed instructions for the DUMBORC X6F and X6FG 2.4G 6-channel radio control system receivers. These receivers are designed for use with the DUMBORC RC X6 Transmitter and are suitable for various RC models including cars, boats, and tanks. The X6FG model includes an integrated gyroscope for enhanced stability.

2. Ürün Bittiview

The DUMBORC X6F and X6FG receivers are compact and feature 6 channels for connecting various RC components. The X6FG model is distinguished by its integrated gyroscope, which helps maintain model stability and prevent unwanted movements like tail flick and rollover. Both models are functionally identical, with the primary difference being the presence of the gyroscope in the X6FG and potentially randomized casing colors.

Figure 2.1: DUMBORC X6FG receiver, top view, showing 6 channels and power input.

Figure 2.2: DUMBORC X6FG receiver with antenna extended.

Figure 2.3: DUMBORC X6FG receiver, angled view, showing pin headers.

Figure 2.4: Important note regarding receiver color variations.

Figure 2.5: Comparison of X6F receiver versions.

Figure 2.6: Comparison of X6FG receiver versions.

3. Özellikler

Figure 3.1: X6FG Receiver dimensions.

Figure 3.2: X6F Receiver dimensions.

4. Kurulum ve Bağlantı

4.1 Bileşenleri Bağlama

The receiver features 6 channels for connecting various components such as servos, Electronic Speed Controllers (ESCs), and LED lights. Ensure correct polarity when connecting. The receiver supports high-voltage direksiyon sistemi.

Şekil 4.1: Ör.ample wiring diagram for connecting components to the receiver.

4.2 Binding with Transmitter (Matching Code)

To establish a connection between your DUMBORC X6F/X6FG receiver and the DUMBORC X6 Transmitter, follow these steps:

1. Place the transmitter and the receiver in close proximity, ideally within 50 centimeters (approximately 20 inches) of each other.
2. Turn on your DUMBORC X6 Transmitter.
3. Power on the X6F/X6FG receiver.
4. Locate the black binding button on the X6F/X6FG receiver. Press this button twice within two seconds and then release it.
5. The receiver's signal LED will begin to blink. After approximately 8 blinks, the binding process should be successful, and the receiver's signal LED will remain steadily on.

5. Operasyon

Once the receiver is successfully bound to the transmitter and all components are connected, you can begin operating your RC model. The X6FG model, with its integrated gyroscope, offers enhanced stability. The gyroscope sensitivity can be adjusted to suit your model and driving preferences, helping to prevent tail flick and rollover.

6. Bakım

• Alıcıyı temiz tutun ve toz, kir ve nemden uzak tutun.
• Alıcıyı aşırı sıcaklıklara veya uzun süre doğrudan güneş ışığına maruz bırakmaktan kaçının.
• Tüm bağlantıların sağlam ve korozyondan arınmış olduğundan emin olmak için düzenli olarak kontrol edin.
• Ensure the antenna is not damaged and is positioned optimally for best signal reception.
• Kullanılmadığı zamanlarda alıcıyı kuru ve güvenli bir yerde saklayın.

7. Sorun Giderme

• Receiver not binding: Ensure the transmitter and receiver are within 50cm during the binding process. Double-check that the binding button is pressed correctly (twice within two seconds). Verify both devices are powered on.
• Loss of control/intermittent signal: Check the control distance; ensure you are within 400 meters. Inspect the antenna for damage or obstruction. Ensure there are no strong interference sources nearby.
• Gyroscope issues (X6FG): If the model is unstable or exhibiting unexpected behavior, check the gyroscope sensitivity settings on your transmitter. Adjust as needed.

8. Kullanıcı İpuçları

• Bağlama İşlemi: Some users find the binding process straightforward, while others might need to repeat it a few times to ensure a solid connection. Always refer to your transmitter's manual for any specific binding instructions it might have.
• Uyumluluk: This receiver is specifically designed for the DUMBORC X6 Transmitter. Compatibility with other transmitter brands (e.g., Radiolink) is not guaranteed and may not work.
• Başvuru: The receiver is intended for RC cars, boats, and tanks. While it might physically connect to other RC models like aircraft, its functionality and safety for such applications are not specified or guaranteed.

9. Garanti ve Destek

Garanti bilgileri, teknik destek veya servis talepleri için lütfen doğrudan satıcı veya üreticiyle iletişime geçin. Satın alma belgesi olarak satın alma fişinizi saklayın.