1. Giriş
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt SPE ES Series Hybrid Solar Inverter. The Growatt SPE ES series are single-phase hybrid solar inverters designed for residential solar energy systems, offering efficient power conversion and smart energy management. Please read this manual thoroughly before installation and operation.
2. Kurulum
2.1 Kutudan Çıkarma ve İnceleme
Carefully unpack the inverter and all accessories. Inspect the contents for any damage. If any components are missing or damaged, contact your supplier immediately.
2.2 Fiziksel Kurulum
The inverter should be mounted in a well-ventilated area, away from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow. The dimensions of the inverter are approximately 550mm (W) x 465mm (H) x 150mm (D), and it weighs 21.5kg. Use appropriate mounting hardware to secure the inverter to a sturdy wall or frame.
2.3 Elektrik Bağlantıları
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the inverter is switched off before making any connections.
2.3.1 Sistem Mimarisi
The Growatt SPE ES inverter integrates into a comprehensive solar energy system, allowing for spontaneous use of generated power and uploading excess power to the grid. The system typically includes solar panels, the inverter, metering devices, the power grid, and local loads. Monitoring can be done via a Cloud Server, Shine Server, or Shine Phone application.
2.3.2 Bağlantı Noktaları
The inverter features various connection ports for different components of your solar system:
- PV1, PV2: Photovoltaic input terminals for solar panels.
- AC Girişi: Connection for the AC grid supply.
- GEN: Generator input terminal.
- AC Çıkış: Evsel yükler için bağlantı.
- DC Girişi: Akü bağlantı terminalleri.
- CURRENT SHARING: For parallel operation with multiple inverters.
- NC C NO: Harici kontrol için kuru kontak.
- PAR-IN, PAR-OUT: Paralel iletişim portları.
- BMS, RS485: Communication ports for Battery Management System and other devices.
- WiFi/GPRS, USB: Data communication modules for monitoring.
- GİRİŞ KESİCİ: Integrated input breaker for safety.
3. Kullanım Talimatları
3.1 Açma/Kapatma
- Tüm elektrik bağlantılarının sağlam ve doğru olduğundan emin olun.
- Turn on the DC input switch (if present) and then the AC input breaker.
- Locate the 'ON/OFF' switch on the inverter and switch it to 'ON'.
- The inverter display will light up, indicating the startup sequence.
- To power off, reverse the sequence: switch the inverter to 'OFF', then turn off the AC input breaker, and finally the DC input switch.
3.2 Ekran ve Kontroller
The inverter features an LCD display and control buttons for monitoring system status and adjusting settings.
- Görüntülemek: Shows real-time data such as power generation, battery status, and error codes.
- Buttons (ESC, UP, DOWN, ENTER): Menülerde gezinmek ve ekrandaki seçimleri onaylamak için kullanılır.
3.3 İzleme
The Growatt SPE ES inverter supports remote monitoring via WiFi or 4G communication modules. This allows you to track your system's performance using the Shine Phone app or through the Cloud Server/Shine Server platforms.
- Shine Phone App: Download the official Growatt monitoring app to your smartphone for real-time data and alerts.
- Cloud/Shine Server: Access detailed performance reports and historical data through the web portalı.
4. Bakım
4.1 Genel Bakım
- Keep the inverter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ensure that the ventilation openings (fans) are not blocked to prevent overheating.
- Tüm kablo bağlantılarının sıkılığını ve aşınma veya hasar belirtilerini düzenli olarak kontrol edin.
4.2 Çevresel Koşullar
To ensure optimal performance and longevity, the inverter should operate within the specified environmental conditions:
- Çalışma Sıcaklık Aralığı: –10°C ila +50°C
- Bağıl Nem: %5 ila %95 (yoğuşmasız)
- Yükseklik: <2000m
- Koruma Derecesi: IP20 (Indoor use recommended, protect from water and dust ingress)
5. Sorun Giderme
If the inverter is not operating as expected, consider the following basic troubleshooting steps:
- Güç Yok/Ekran Kapalı: Check all AC and DC input connections and ensure the ON/OFF switch is in the 'ON' position. Verify power supply from the grid and solar panels.
- Arıza Göstergesi Açık: Refer to the inverter's display for specific error codes. Consult the full Growatt user manual (if available) for detailed explanations of fault codes.
- Düşük Güç Çıkışı: Check solar panel connections and ensure they are clean and free from shading. Verify battery charge level if operating in backup mode.
- İletişim Sorunları: Ensure WiFi/4G modules are correctly installed and configured. Check network connectivity.
For complex issues or if troubleshooting steps do not resolve the problem, please contact technical support.
6. Özellikler
Below are the detailed specifications for the Growatt SPE ES Series Hybrid Solar Inverters:
| Veri Sayfası | SPE 8000 ES | SPE 10000 ES | SPE 12000 ES |
|---|---|---|---|
| Giriş verileri (DC) | |||
| Maksimum önerilen fotovoltaik güç (modül STC için) | 10000W | 12500W | 15000W |
| Maks. DC sestage | 550V | ||
| Hacmi başlattage | 120V | ||
| MPP cilttage aralığı | 60V-480V | ||
| MPP izleyicilerinin sayısı | 2 | ||
| MPP takip sistemi başına fotovoltaik (PV) dizi sayısı | 1 | ||
| Maks. MPP izleyici başına giriş akımı | 27A | ||
| Çıkış verileri (AC) | |||
| AC nominal güç | 8000W | 10000W | 12000W |
| Maks. AC görünür güç | 8000VA | 10000VA | 12000VA |
| Nominal AC hacmitage | 230V | ||
| AC şebeke frekansı | 50/60Hz | ||
| Çıkış akımı | 34.8A | 43.5A | 52.2A |
| Ayarlanabilir güç faktörü | 0.8 önde…0.8 gecikmeli | ||
| THDi | < %5 | ||
| Maksimum dönüşüm verimliliği (PV/AC) | %96.5 | ||
| Avrupa verimliliği @ vnominal (PV/AC) | %95.5 | ||
| Pil verileri (DC) | |||
| Nominal DC hacmitage | 48V | ||
| Maksimum şarj ve deşarj akımı | 190A/200A | 220A/240A | 250A/280A |
| Pil türü | Lityum/Kurşun asit | ||
| Yedek güç (AC) | |||
| AC nominal çıkış gücü | 8000W | 10000W | 12000W |
| Nominal AC çıkış hacmitage | 230V | ||
| Nominal AC çıkış frekansı | 50/60Hz | ||
| Geçiş zamanı | <20ms@Single <30ms@Paralle |
||
| Yeterlik | |||
| Zirve verimlilik | %96.5 | ||
| Avrupa verimliliği | %95.5 | ||
| Genel veri | |||
| Boyutlar (G / Y / D) | 550/465/150 mm | ||
| Ağırlık | 21.5 kilo | ||
| Çalışma sıcaklığı aralığı | -10°C ... +50°C | ||
| Gürültü emisyonu (tipik) | ＜ 75dB | ||
| Kendi kendine tüketim | < 75H | ||
| Topoloji | Trafosuz | ||
| Soğutma | DC fanı | ||
| Koruma derecesi | IP20 | ||
| Bağıl nem | %5~%95 yoğuşmasız | ||
| Yükseklik | <2000m | ||
| İletişim | Wi-Fi/4G | ||
7. Kullanıcı İpuçları
- Profesyonel Kurulum: Always ensure that the inverter is installed by a certified professional to guarantee safety and compliance with electrical standards.
- Havalandırma Anahtardır: Proper airflow around the inverter is crucial for preventing overheating and ensuring long-term performance. Regularly check that vents are clear.
- Düzenli Olarak İzleyin: Utilize the Growatt monitoring app or web platform to keep track of your system's performance, battery status, and energy production. This helps in early detection of any issues.
- Pil Uyumluluğu: Ensure that any connected batteries (Lithium or Lead-acid) are compatible with the inverter's specifications for optimal charging and discharging.
- Paralel Çalışma: If expanding your system with parallel inverters, ensure correct current sharing and communication connections as per the system architecture.
8. Garanti ve Destek
For technical support, warranty claims, or any inquiries regarding your Growatt SPE ES Hybrid Solar Inverter, please use the contact information below. It is recommended to have your product model and serial number ready when contacting support.
- WhatsApp: +86 18473951878
- E-posta: 17680775530@163.com
