Futaba DLPH-3 10-channel Dual Receiver Connection Power Hub User Manual

1. Giriş

The Futaba DLPH-3 is a compact and robust 10-channel dual receiver connection power hub designed to enhance the reliability and power distribution in RC aircraft, particularly for 50-70cc models. It features a dual Rx link system, allowing for the connection of two receivers and two batteries, providing critical redundancy and safety. The integrated electronic switch utilizes a FET circuit for efficient current control, and a telemetry function provides real-time power supply voltage monitoring. Its design also ensures compatibility with various battery types, incorporating protection mechanisms for safe operation.

2. Paket İçeriği

Paketi açtığınızda lütfen aşağıdaki tüm öğelerin mevcut olduğundan emin olun:

• Futaba DLPH-3 Dual Receiver Connection Power Hub
• Switch/receiver connection cords (x3)
• Gyro connection cords (x3)
• Flange damper
• Gözcükler
• Ahşap vidaları

3. Kurulum ve Bağlantılar

The DLPH-3 is designed for straightforward installation. Refer to the diagram below for port identification and connection points.

3.1 Alıcıların Bağlanması

• Connect your primary receiver to the RX1 liman.
• Connect your secondary receiver to the RX2 liman.
• The DLPH-3 operates as a dual Rx link system, providing redundancy.

3.2 Pillerin Bağlanması

• The DLPH-3 features an XT60 konektörü for battery input.
• It is designed to connect two batteries for enhanced power supply and safety.
• Ensure batteries are compatible and correctly polarized before connection. The system includes protection for connecting different types of batteries, but it is always best practice to use matched batteries where possible.

3.3 Servo and S.BUS2 Connections

• Connect your servos to the designated servo ports (1-10) on the left side of the unit.
• The Bölüm 3 port is available for specific channel output.
• Kullanın S.BUS2 port for S.BUS2 compatible devices, allowing for advanced telemetry and control.

3.4 Montaj

Use the provided flange damper, eyelets, and wood screws to securely mount the DLPH-3 within your aircraft. Ensure it is placed in a location that is protected from vibrations and potential damage, and allows for adequate airflow if needed.

4. Kullanım Talimatları

Once all connections are made and verified, the DLPH-3 operates as an electronic switch, managing power distribution to your receivers and servos.

• Güç Açık: Connect your batteries to the XT60 connector. The internal electronic switch will activate, providing power to the connected components.
• Durum Göstergeleri: Observe the LEDs for RX1 and RX2 (as shown in Figure 2) to confirm proper receiver connection and status.
• Telemetri: The DLPH-3 features a telemetry function that displays the power supply voltage. This information can be accessed via your compatible Futaba S.BUS2 telemetry system, allowing you to monitor battery health during flight.

5. Bakım

To ensure the longevity and reliable performance of your Futaba DLPH-3, follow these general maintenance guidelines:

• Keep the unit clean and free from dust, dirt, and moisture.
• Regularly inspect all connections for signs of wear, corrosion, or looseness.
• Üniteyi uzun süre aşırı sıcaklıklara veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
• C'yi açmaya çalışmayınasing or modify the internal circuitry, as this will void the warranty and may cause damage.

6. Sorun Giderme

If you encounter issues with your DLPH-3, consider the following troubleshooting steps:

• Güç Yok: Check battery connections, ensure batteries are charged, and verify the XT60 connector is fully seated.
• Alıcı yanıt vermiyor: Confirm both receivers are correctly connected to RX1 and RX2 ports and are bound to your transmitter. Check the status LEDs on the DLPH-3 for receiver activity.
• Aralıklı operasyon: Inspect all servo and S.BUS2 connections for secure fit. Ensure no wires are pinched or damaged.
• Telemetry Issues: Verify your S.BUS2 telemetry system is correctly configured and compatible with the DLPH-3.

If problems persist after these checks, contact Futaba customer support or your authorized dealer.

7. Özellikler

8. Garanti ve Destek

For warranty information, technical support, or service inquiries, please contact your authorized Futaba dealer or visit the official Futaba webSite. Satın alma belgenizi herhangi bir garanti talebi için saklayın.