AODELAN E7G Wireless Flash Trigger Transceiver

1. Giriş

The AODELAN E7G is a versatile wireless flash trigger and transceiver designed to provide photographers with efficient and flexible control over their lighting setups. Compatible with Godox and Flashpoint 2.4G wireless systems, it supports single-contact cameras and offers an ultra-long range of up to 650 feet (200 meters). Beyond flash triggering, the E7G can also function as a wired or wireless camera shutter release, enhancing shooting flexibility. Its intuitive design features dedicated buttons for direct control, eliminating the need for complex layered menus.

2. Güvenlik Bilgileri

• Cihazı suya veya aşırı neme maruz bırakmayın.
• Cihazı düşürmekten veya güçlü darbelere maruz bırakmaktan kaçının.
• Çocukların erişemeyeceği yerde saklayınız.
• Cihazı kendiniz sökmeye veya onarmaya çalışmayın. Servis için yetkili personele başvurun.
• Use only specified batteries (AAA 1.5V) or power sources.
• Cihazı uzun süre kullanırken yeterli havalandırmayı sağlayın.

3. Paket İçeriği

• AODELAN E7G Wireless Flash Trigger Transceiver x1
• USB Type-C (A-C) cable x1 (length approx. 0.5m/1.6 ft)
• Flash sync cable (Ø3.5-3.5 mini plug) x1 (length approx. 0.3m/1.0 ft)
• Kayış x1
• Kullanım Kılavuzu x1

4. Ürün Bittiview

The E7G features a clear OLED screen and dedicated buttons for easy operation.

4.1. Buttons and Dial Functions:

• Buzz button: Press to turn on/off the buzz of the flash unit(s) being controlled when it is fully recycled.
• Model button: Press to turn the modeling light of the flash unit(s) on/off.
• Group buttons (A/B/C/D/E): Press to select the group for adjustment.
• TEST düğmesi: Press to manually transmit a sync signal to trigger the flash unit to fire to verify proper communication.
• Aramak: Turn to adjust the flash power for the selected group.
• Orta düğme: Press to enter the menu display of E7G.
• Güç düğmesi: Press and hold to power the E7G on or off.

4.2. Ports and Mount:

• Flaş Yuvası Bağlantısı: For mounting on a camera. Features a dustproof rubber ring.
• IN Connector (Ø3.5 mini jack): For wired camera shutter release.
• OUT Connector (Ø3.5 mini jack): For connecting to older flash units as a receiver.
• USB Type-C Bağlantısı: For external power supply and firmware upgrades.

5. Kurulum

5.1. Cihaza Güç Verme

• Pil Gücü: Insert two AAA (1.5V) batteries into the battery compartment for on-the-go portability.
• Harici güç: Connect the E7G's USB Type-C port to an external power source using the provided USB Type-C cable. This allows for non-stop studio work, even without batteries.

5.2. Kameraya Montaj

Slide the E7G's hot shoe mount onto your camera's hot shoe until it clicks into place. Ensure it is securely fastened. The E7G features a center single-contact hot shoe mount, compatible with most DSLR and mirrorless cameras with a standard ISO hot shoe interface.

Note: A few cameras with standard hot-shoe do not support single-contact triggers, such as Canon EOS Rebel SL3 (EOS 250D / 2000D II / Kiss X10), EOS Rebel T100 (EOS 4000D / 3000D), R50, R50V, V1; Nikon P1000.

5.3. Connecting to Flash Units (Transceiver Function)

The E7G can act as both a transmitter (TX) and a receiver (RX). To use it as a receiver for older flash units without built-in radio systems, connect the E7G's OUT connector to the sync port of the flash unit. This integrates the flash into the Godox/Flashpoint lighting system.

5.4. Camera Shutter Release Setup

• Wired Shutter Release: Set one E7G to Receive mode (RX). Connect the IN port of the E7G (RX) to the shutter remote terminal on the camera using an appropriate shutter cable (sold separately). Press and hold the TEST button on the E7G (RX) to release the camera shutter.
• Kablosuz Deklanşör: Set one E7G to Transmit mode (TX) and another to Receive mode (RX). Set both E7Gs to the same channel. Press and hold the TEST button on the E7G (TX) to wirelessly release the camera shutter. The E7G (RX) can be operated to release the camera shutter by connecting it to the camera shutter remote terminal. It can be operated without being mounted on the camera's hot shoe.

6. Kullanım Talimatları

6.1. Güç Açma/Kapatma

Güç düğmesini basılı tutun () for a few seconds to turn the E7G on or off.

6.2. Flaş Gücünün Ayarlanması

Once a group is selected (A, B, C, D, or E), turn the Dial to adjust the flash power for that specific group. The OLED screen will display the current power value.

6.3. Grup Kontrolü

The E7G supports 5 independent lighting groups (A-E). Press the corresponding Group button (A, B, C, D, or E) to select a group. When using multiple lights, each group's power can be adjusted individually for richer light and shadow layering.

6.4. Kanal ve Kimlik Ayarları

The E7G offers 32 channels and 99 IDs (1-99) for anti-interference. To access these settings, press the Center button to enter the menu. Navigate using the Dial and confirm with the Center button. Ensure your E7G and flash units are set to the same channel and ID to prevent interference, especially in multi-light setups.

Note: It can only be used when the flash units have the wireless ID setting function. If they do not, set the ID to OFF.

6.5. Modeling Light and Beep Control

• Modelleme Işığı: Press the Model button () to turn the modeling light of the flash unit(s) on or off.
• Bip: Press the Buzz button () to turn on/off the beep sound from the flash unit(s) when they are recycled.

6.6. Test Yüklemesi

Press the TEST button to manually trigger the flash unit(s) and verify communication.

6.7. Transmit/Receive Mode Switching and Distance Settings

• TX (Transmitting mode): The E7G acts as a trigger, sending signals to flash units.
• RX (Receiving mode): The E7G acts as a receiver, receiving signals from another E7G or compatible trigger.
• Mesafe Ayarları:
  • 0-1m: Select when the E7G is relatively close to the flash unit (within 1 meter).
  • 1-200m: Select when remotely controlling from a distance (more than 1 meter). This setting optimizes signal transmission for longer ranges, up to 650 feet (200 meters) in open space without interference.

7. Uyumluluk

7.1. Camera Compatibility (Single-Contact Hot Shoe)

The AODELAN E7G is designed with a center single-contact hot shoe mount, making it compatible with most DSLR and Mirrorless cameras featuring a standard ISO hot shoe interface. This includes, but is not limited to, cameras from:

• Kanon
• Nikon
• Sony (excluding Multi Interface Shoe without central contact)
• Minolta
• Olimpos
• Panasonic
• Pentax
• Fujifilm

Note: The E7G does not support TTL or HSS. Some cameras with standard hot-shoe do not support single-contact triggers, such as Canon EOS Rebel SL3 (EOS 250D / 2000D II / Kiss X10), EOS Rebel T100 (EOS 4000D / 3000D), R50, R50V, V1; Nikon P1000.

7.2. Flash Compatibility (Godox & Flashpoint 2.4G Wireless Systems)

The E7G is compatible with Godox 2.4G Wireless X System and Flashpoint 2.4GHz R2 Radio Remote System. Synchronization triggering and manual adjustment are supported; TTL is not supported.

Godox Compatible Flashes:

• Studio Flashes: SK400II/SK300II, SK400IV/SK300IV, SG400II, MS300, MS300V, MS200, MS200V, QTII Series (QT1200II/QT600II/QT400II), QTIII Series (QT400IIIM/QT600IIIM/QT1200IIIM), DPIII Series (DP400II/DP600II/DP800II/DP1000II), QSII Series (QS400II/QS600II/QS800II/QS1200II), GSII Series (GS200II/GS300II/GS400II)
• Outdoor Flashes: AD100Pro, AD200, AD200ProII, AD300Pro, AD360II, AD400ProII, AD400Pro, AD600, AD600B, AD600BMII, AD600Pro, AD1200Pro
• On Camera Flashes: V1, V1Pro, V100, V350, V480, V850III, V860II, V860III, TT350, TT350P, TT600, TT600s, TT685, TT685II

Flashpoint Compatible Flashes:

• Studio Flashes: XPLOR 100 Pro, 300 Pro, XPLOR 400 Pro II, 400 Pro, 400, XPLOR 600 Pro II, 600 Pro, 600, XPLOR Power 1200 Pro, XPLOR Power 2400 Pro, eVOLV 200 Pro II, 200 Pro, 200, Studio Pro 1000 III-V, 800 III-V, 600 III-V, Studio Pro 400 III-V, Studio 400 II-V, 400, Studio 300 II-V, 300, Rapid 400, 400 II, 600, 600 II, 1200, 1200 II, BLAZ 300-V, BLAZ 200-V, Streaklight 360.
• On Camera Flashes: Zoom Li-on, Zoom Li-on Mini, Zoom Li-on Compact, Zoom Li-on X, Zoom Li-on X PRO, Zoom-Mini, Zoom X, Zoom II AA, Zoom Li-on III, Zoom, X100, iT30Pro, iT20, FlashBack Lux Master Retro.

For older flash units (without built-in radio systems) or flash units from other brands, synchronization can be achieved by connecting to the E7G in receiving mode (RX) via the sync port.

8. Özellikler

9. Sorun Giderme

• Flaş ateşlenmiyor:
  • Ensure the E7G is powered on and batteries are charged/external power is connected.
  • Verify the E7G is securely mounted on the camera's hot shoe.
  • Check that the E7G and flash units are set to the same channel and ID.
  • Confirm the flash unit is powered on and in a compatible mode (e.g., manual mode).
  • Press the TEST button on the E7G to manually trigger the flash.
  • Check camera compatibility (refer to Section 7.1).
• Shutter release not working:
  • Ensure the E7G (RX) is connected to the camera's remote terminal with the correct cable.
  • For wireless release, ensure both E7Gs are powered on, set to TX/RX modes respectively, and on the same channel.
  • Press and hold the TEST button on the E7G (TX) or E7G (RX) for wired release.
• Parazit sorunları:
  • Change the channel and/or ID settings on both the E7G and flash units.
  • Ensure the distance setting (Far/Near) is appropriate for your shooting environment.
• Ekran görüntülenmiyor:
  • Check battery level or external power connection.
  • Cihazı kapatıp tekrar açmayı deneyin.

10. Kullanıcı İpuçları

• For optimal range and stability, especially in outdoor environments, ensure the E7G's distance setting is set to '1-200m'.
• When using multiple flash units, utilize the 5 independent groups (A-E) to quickly adjust power levels for different lights without navigating through complex menus.
• If experiencing signal issues in crowded environments, try cycling through the 32 channels and 99 IDs to find a clear frequency.
• Keep the firmware updated via the USB Type-C port to ensure optimal performance and access to new features.

11. Bakım

• Clean the device regularly with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Ensure the hot shoe contacts are clean and free of debris for reliable connection.
• When not in use for extended periods, remove the AAA batteries to prevent leakage.
• Store the E7G in a cool, dry place, away from direct sunlight and extreme temperatures.

12. Destek

For further assistance, technical support, or warranty inquiries, please contact AODELAN customer service through your purchase platform or visit the official AODELAN webalan.