1. Giriş
The AODELAN ZC-5 is a professional wireless remote controller designed for Canon Cinema Cameras and Camcorders. It offers comprehensive control over various camera functions, allowing for greater creative freedom and efficient on-set adjustments. With its reliable spread spectrum communication, it provides a stable connection up to 650ft (200m) wirelessly, or 780ft (240m) with optional wired extension cables.
Video: Bittiview of the AODELAN ZC-5 Wireless Camcorder Remote in various professional settings.
2. Paket İçeriği
Lütfen paketinizde aşağıdaki tüm öğelerin bulunduğundan emin olun:
- 1x Remote Controller (ZC-5)
- 1x Receiver (ZX-5 RX)
- 1x Attachment Plate
- 1x USB Type-C Kablosu
- 1x Extension Cable (33ft/10m)
- 1x Remote Cable (Ø2.5-2.5, stretchable to 3ft/1m)
- 1x Soft Cloth Bag
- 1x Kullanım Kılavuzu
Image: Visual representation of all items included in the AODELAN ZC-5 package.
3. Ürün Bittiview
The AODELAN ZC-5 Remote Controller provides a comprehensive set of controls for your Canon camcorder, designed for intuitive operation and quick adjustments.
3.1 Area Distribution of Controls
Image: Diagram highlighting different control areas on the ZC-5 Remote Controller.
- Connection Indicators and Keys: Camera power key, ON/OFF switch, HOLD key.
- Temel İşlemler: Buttons for common functions.
- Pozlama Kontrolleri: Shutter controls, ISO speed/Gain controls.
- Görüntü İşleme: Knee, black gamma, and sharpness controls.
- Renk Dengesi: White balance and master black controls.
- Assignable Keys (1 to 4): Customizable buttons for frequently used functions.
- Screen and Menu Settings: Keys for navigating the remote's screen and camera menu.
- Advanced Image Controls: Master pedestal, iris, and ND filter controls.
- Recording & Focus: Video recording (REC START/STOP), focus, and zoom controls.
Image: The ZC-5 Remote Controller featuring illuminated buttons for improved visibility in low-light conditions.
4. Kurulum Talimatları
4.1 Connecting the Remote Controller
- Ensure both the camera and the remote controller are powered off.
- Connect the remote cable from the ZC-5 Remote Controller to the camera's REMOTE (or REMOTE A) terminal. Note that REMOTE B is not supported.
- For wireless operation, connect the ZX-5 RX Receiver to the camera's REMOTE terminal.
4.2 Camera Settings Configuration
To enable full functionality of the ZC-5, you must configure your camera's remote settings:
- Turn on your Canon camcorder.
- Navigate to the camera's menu system.
- Locate the 'Remote' or 'Other Functions' setting.
- Change the remote setting from "Standard" to "RC-V100".
- Alternatively, you may need to select: MENU → System Setup → REMOTE Term. → RC-V100 (REMOTE A).
- It is recommended to cancel any automatic adjustment of the camera's shooting state. For example, set the FULL AUTO switch to OFF. If your camera has a ZOOM switch, set it to ROCKER for optimal control via the remote.
Image: Screenshots showing the camera menu navigation to activate 'RC-V100' mode for remote control.
Resim: Ayrıntılı view of camera menu settings for configuring assignable buttons and the zoom switch.
5. Kullanım Talimatları
5.1 Temel Kamera Kontrolü
The ZC-5 precisely supports core shooting operations:
- Record Start/Stop: Use the dedicated REC START/STOP button.
- Yakınlaştır: Control zoom smoothly for near-far switching.
- Odak: Achieve precise focusing for sharp subjects.
- Iris Adjustment: Adjust aperture for light changes.
Image: Close-up of the ZC-5 Remote Controller demonstrating controls for record, zoom, focus, and iris.
5.2 Full Camera Menu Access
Control all camera settings remotely via the ZC-5 without needing to use on-body menus, saving time for quick tweaks on set.
Image: The ZC-5 Remote Controller being used to access and control camera menu settings remotely.
5.3 Precise Exposure Control
Adjust ISO/GAIN and SHUTTER quickly, perfect for changing light conditions (indoor ↔ outdoor shoots). This helps maintain clear footage without over/underexposure.
Image: Close-up of the ZC-5 Remote Controller showing dedicated controls for ISO/Gain and Shutter.
5.4 On-the-Spot White Balance Tuning
Adjust white balance remotely from the ZC-5 to ensure consistent colors and reduce post-production color grading time. Controls include Knee Point, Knee Slope, AWB, Preset, and White Balance knobs.
Image: The ZC-5 Remote Controller displaying its white balance adjustment section.
5.5 Image Tone Management
Control the black level and color cast of blacks by adjusting MASTER PEDESTAL and MASTER BLACK. This helps achieve a balanced look in various environments.
- Master Pedestal: Increases or decreases the black level. Higher settings make dark areas brighter but may decrease contrast.
- Master Black: Corrects color cast in blacks.
Image: The ZC-5 Remote Controller showing controls for Master Pedestal and Master Black for image tone management.
5.6 Custom Buttons
Assign four buttons (1-4) for quick access to frequently used functions such as white balance adjustment, peaking, or waveform monitor (WFM). Setting may need to be made on the camera first: MENU → [Assignable Buttons] → [Link to Camera] → [Enable]. Available functions vary by camera model.
Image: The ZC-5 Remote Controller highlighting its four customizable buttons.
5.7 Control Two Cameras Simultaneously
The ZC-5 allows for simultaneous control of two cameras. Connect one camera to the CAMERA connector of ZC-5 via the remote cable, and wirelessly connect another camera through the Receiver.
Notlar:
- Turn off each camera before connecting and disconnecting the camera.
- When controlling two cameras simultaneously, the time taken for the cameras to respond may not be the same. For example, when the REC START/STOP key is pressed to start recording simultaneously, the actual recording start timing may differ by several frames.
Image: Diagram illustrating the setup for controlling two cameras simultaneously using the ZC-5 Remote Controller.
6. Bakım
- Temizlik: Uzaktan kumandayı ve alıcıyı temizlemek için yumuşak, kuru bir bez kullanın. Sıvı temizleyiciler veya çözücüler kullanmayın.
- Depolamak: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided soft cloth bag for protection.
- Pil Değişimi: Replace AA batteries in the remote controller as needed. Ensure correct polarity.
- Kablo Bakımı: Hasarı önlemek için kabloları aşırı bükmekten veya kıvırmaktan kaçının.
7. Sorun Giderme
7.1 Yaygın Sorunlar ve Çözümler
- Uzaktan kumanda yanıt vermiyor:
- Ensure the remote controller and receiver are powered on.
- Check battery levels in the remote controller and replace if necessary.
- Verify that the remote cable is securely connected to the camera's REMOTE (or REMOTE A) terminal.
- Confirm that the camera's remote setting is correctly configured to "RC-V100" in the menu.
- Ensure the remote is within the specified operating range (650ft/200m wireless, 780ft/240m wired).
- Specific functions (e.g., AUTO aperture, zoom lever) not working:
- If the camera is an interchangeable lens type, certain functions may not work depending on the attached lens.
- Some keys may not function on specific camera models even if the setup is correct. Refer to your camera's manual for compatibility details.
- Ensure the camera's automatic shooting state (e.g., FULL AUTO switch) is set to OFF, and the ZOOM switch is set to ROCKER if applicable.
- Parazit yapmak:
- The ZC-5 uses spread spectrum communication to resist interference. However, in environments with strong electromagnetic interference, try to minimize other wireless devices or move to a different location.
8. Özellikler
8.1 Remote Controller (ZC-5)
| Özellik | Detay |
|---|---|
| Boyutlar (Yaklaşık) | 88 x 236 x 49 mm (3.5 x 9.3 x 1.9 in.) (Excluding attachment plate, remote cable) |
| Ağırlık (Yaklaşık) | 335 g (11.8 oz) (Excluding battery, attachment plate, remote cable) |
| Kullanım Ortamı | Temperature: 0°C to 40°C (32°F to 104°F); Humidity: 80% or lower |
| Bağlayıcı | Ø2.5 stereo mini jack x1 (CAMERA connector); USB Type-C connector x1 |
| Ekran | OLED screen, 1.3" |
| Yakınlaştırma Kolu | Supports pressure-sensitive control |
| Güç Kaynağı | Two AA 1.5V batteries / Supplied by the camera (wired connection) / Supplied by external power supply (USB Type-C) |
Image: Detailed specifications and physical display of the ZC-5 Remote Controller.
8.2 Receiver (ZX-5 RX)
| Özellik | Detay |
|---|---|
| Boyutlar (Yaklaşık) | 52 x 98 x 43 mm (2.0 x 3.9 x 1.7 inç) |
| Ağırlık (Yaklaşık) | 78 gr (2.8 oz) |
| Kullanım Ortamı | Temperature: 0°C to 40°C (32°F to 104°F); Humidity: 80% or lower |
| Bağlayıcı | Ø2.5 stereo mini jack x1 (2.5 connector); Ø3.5 stereo mini jack x1 (3.5 connector); USB Type-C connector x1 |
| Ekran | OLED screen, 1.3" |
| Uzaktan Kumanda Aralığı | Wireless: Up to 650 ft. (200m) (spread spectrum communication) Wired: Up to 780 ft. (240m) (using AODELAN extension cables, sold separately) |
Image: Detailed specifications and physical display of the ZX-5 RX Receiver.
9. Uyumlu Modeller
The AODELAN ZC-5 is designed to replace the Canon RC-V100 and is compatible with a wide range of Canon camcorders and cinema cameras:
- Canon ME Series: ME200S-SH, ME20F-SH
- Canon VIXIA/LEGRIA Series: HF G70, G60, G50, GX10
- Canon XF Series: XF705, XF605, XF405, XF400, XF315, XF310, XF305, XF300, XF205, XF200
- Canon EOS Cinema Series: C80, C700, C70, C500II, C500, C400, C300III, C300II, C300, C200, C100II
- Canon XA Series: XA75, XA70, XA65, XA60, XA55, XA50, XA45, XA40, XA15, XA11
Resim: Eskiamples of compatible Canon VIXIA/LEGRIA and ME series cameras.
Resim: Eskiamples of compatible Canon EOS Cinema, XA, and XF series cameras.
10. Kullanıcı İpuçları
- Camera Remote Setting: Always ensure your camera's remote setting is changed from "Standard" to "RC-V100" in the menu for the ZC-5 to function correctly.
- Disable Auto Modes: For full manual control and to prevent conflicts, it's advisable to disable any automatic shooting modes (e.g., Full Auto) on your camera when using the ZC-5.
- Zoom Switch: If your camera has a physical zoom switch, set it to 'ROCKER' mode to allow the remote's zoom control to operate effectively.
- Objektif Uyumluluğu: Be aware that with interchangeable lens cameras, certain functions like automatic aperture or zoom lever might be affected by the specific lens attached.
- Dual Camera Sync: When controlling two cameras simultaneously, minor delays in recording start times (a few frames) may occur between the two cameras.
11. Garanti ve Destek
AODELAN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official AODELAN webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Satın alma fişinizi, olası garanti talepleri için satın alma belgesi olarak saklayın.
