Kılavuzlar+

LANDTEK ATP-100

LANDTEK ATP-100 Digital ATP Fluorescence Detector ATP Meter

Model: ATP-100 | Brand: LANDTEK

1. Giriş

The LANDTEK ATP-100 Digital ATP Fluorescence Detector is a precision instrument designed for rapid detection of Adenosine Triphosphate (ATP) fluorescence. It is widely used in various fields including food safety, medicine and health, daily chemical production, papermaking, industrial water treatment, national defense, environmental protection, water administration, and customs entry/exit quarantine departments. This manual provides essential information for the proper setup, operation, and maintenance of your ATP-100 meter.

LANDTEK ATP-100 Digital ATP Fluorescence Detector ATP Meter
Figure 1: LANDTEK ATP-100 Digital ATP Fluorescence Detector ATP Meter

2. Kurulum

2.1 Paketin açılması

Carefully unpack the ATP-100 meter and all accessories. Verify that all items listed in the 'Standard Accessories' section of this manual are present and undamaged. The standard accessories include the main unit and a carrying case (B04).

2.2 Pil Kurulumu

The ATP-100 meter is powered by two 1.5V AA (UM-3) batteries. To install the batteries:

  1. Cihazın arkasındaki pil bölmesini bulun.
  2. Pil bölmesi kapağını kaydırarak açın.
  3. İki adet 1.5V AA pili, doğru kutuplara (+/-) dikkat ederek takın.
  4. Pil bölmesi kapağını sıkıca kapatın.
Geri view of LANDTEK ATP-100 meter with battery compartment
Şekil 2: Geri view of the ATP-100 meter showing the battery compartment.

3. Kullanım Talimatları

The ATP-100 features a simple interface for ease of use. The device utilizes bottom detection, which ensures stable and accurate results, unaffected by the instrument's holding or placement angle.

Ön view of LANDTEK ATP-100 meter with display and controls
Şekil 3: Ön view of the ATP-100 meter with display and control buttons.

3.1 Temel İşlemler

  1. Güç Açık: Basın GÜÇ cihazı açmak için düğmesine basın.
  2. Mod seç: Kullanın SEÇME button to switch between RLU (Relative Luminous Unit) or Coliform screening modes.
  3. Parametreleri Ayarlayın: The AYARLAMAK Ve ZAMAN buttons are used to adjust various parameters, such as the testing time (which can be set between 1 and 60 seconds) or to set limit numbers (more than 1000 possible settings).
  4. Testi Gerçekleştir: Insert the test swab into the detection chamber and press the TEST button to initiate a measurement.
  5. View Sonuçlar: The results will be displayed on the screen after the testing time is complete.
  6. Veri Transferi: Test results can be transferred to a PC via the USB port for further analysis and record-keeping.

3.2 Understanding Results

The device displays results in Relative Luminous Units (RLU) or provides a Coliform screening result, depending on the selected mode. A significantly low background value (≤1RLU) ensures accurate detection of trace ATP.

4. Bakım

To ensure the longevity and accuracy of your ATP-100 meter, follow these maintenance guidelines:

  • Cihazı temiz ve kuru tutun. Dış yüzeyini yumuşak bir bezle silin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
  • Ensure the detection chamber is free from dust and debris.
  • Store the meter in its carrying case (B04) when not in use to protect it from physical damage and environmental factors.
  • Replace batteries promptly when the low battery indicator appears to prevent data loss or operational issues.

5. Sorun Giderme

If you encounter any issues with your LANDTEK ATP-100 meter, please refer to the following basic troubleshooting steps:

  • Cihaz açılmıyor: Pillerin montajını kontrol edin ve pillerin bitmediğinden emin olun. Gerekirse değiştirin.
  • Yanlış okumalar: Ensure the test swabs are correctly inserted and not expired. Verify the detection chamber is clean.
  • Veri aktarımı sorunları: Check the USB cable connection and ensure the correct software/drivers are installed on your PC.

Sürekli devam eden sorunlar veya burada ele alınmayan konular için lütfen müşteri desteğiyle iletişime geçin.

6. Özellikler

ParametreDeğer
Kesinlik4X10-18 mol ATP
Tespit Sınırı≤1.0 CFU/ml
Algılama Aralığı0RLU~9999 RLU (Relative Luminous Unit)
Dışkı Koliformu≥1×10-6 KOBİ
Test Zamanı1 second - 60 seconds
Testing Interference±2% or ±2 RLUs
Background Value≤1RLU
Check Out ModeRLU or Coliform screening
Limit Number Can Be Set1000'den fazla
Depolama BoyutuMore than 3000 records
Test Results OutputUSB port for PC transfer
Boyut (G×Y×D)199mm × 76mm × 37mm
Ağırlık (pil dahil)265 gr
Çalışma Sıcaklık Aralığı0℃ ~ 40℃
Bağıl Nem Aralığı%20 - %85
Continuous Degree600
Güç Kaynağı2x 1.5V AA (UM-3) battery
Standart AksesuarlarMain Unit, Carrying Case (B04)
İsteğe bağlı aksesuarlarTest Swabs, RS-232C Data Cable with Software

7. Kullanıcı İpuçları

re tarafından herhangi bir özel kullanıcı ipucu sağlanmamış olsa daviewSoru-cevap bölümü için, en iyi kullanım için bazı genel öneriler şunlardır:

  • Always use fresh, unexpired test swabs for accurate results.
  • Calibrate the device regularly according to manufacturer recommendations, if applicable, to maintain precision.
  • Keep a log of your measurements for trend analysis and quality control.

8. Garanti ve Destek

Specific warranty information for the LANDTEK ATP-100 is not explicitly provided in the product details. For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for any support requests.