Kılavuzlar+

Komshine KPV-53

Komshine KPV-53 Fiber Optic Power Meter & Visual Fault Locator User Manual

Model: KPV-53

Marka: Komshine

1. Giriş

The Komshine KPV-53 is a versatile 2-in-1 device integrating an Optical Power Meter (OPM) and a Visual Fault Locator (VFL). It is designed for efficient and accurate testing of fiber optic networks, allowing measurement of optical power and detection of fiber disconnections. This manual provides detailed instructions for the proper setup, operation, and maintenance of your KPV-53 device.

Komshine KPV-53 2-in-1 Power Meter & Light Source Machine with universal interface and VFL function
The KPV-53 combines an Optical Power Meter and a Visual Fault Locator, featuring a 2.5mm universal interface, support for 7 wavelengths, and built-in VFL. It is designed to be dust resistant.

2. Temel Özellikler

  • 2'si 1 arada İşlevsellik: Integrates Optical Power Meter (OPM) and Visual Fault Locator (VFL).
  • Wavelength Support: Measures optical power across 7 calibrated wavelengths: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm.
  • Evrensel Arayüz: Equipped with a 2.5mm universal interface, compatible with SC, FC, ST, and LC connectors (with optional adapters).
  • Built-in VFL: Features a 10mW Visual Fault Locator for quick and convenient detection of fiber disconnections.
  • Dayanıklı Tasarım: Includes a dust-resistant rubber cap, robust rubber armor, and an anti-wrestling silicone jacket for enhanced protection against drops and dust.
  • LED arka ışığı: Ensures clear display readability in various lighting conditions.
  • Kullanıcı Dostu Kullanım: Simple one-key start and automatic shutdown function to conserve battery life.
  • Uzun Pil Ömrü: Provides approximately 50 hours of operation in continuous mode.
  • Ergonomik Tasarım: Features a scaffold design for comfortable and convenient handling during use.
Komshine KPV-53 functional designs including dust resistance, rubber armor, anti-wrestling jacket, LED backlight, and scaffold design
Üzerindeview of the KPV-53's five functional designs, highlighting its durability and user-centric features.

3. Paket İçeriği

Lütfen tüm öğelerin mevcut ve hasarsız olduğundan emin olmak için paketi dikkatlice kontrol edin:

  • Komshine KPV-53 Fiber Optic Power Meter & VFL
  • Hızlı rehber
  • Garanti Kartı
  • (Piller genellikle dahil değildir ve ayrıca satın alınmalıdır.)
Komshine KPV-53 product list including device, quick guide, and guarantee card
The product package includes the KPV-53 device, a quick guide, and a guarantee card.

4. Özellikler

Komshine KPV-53 Technical Specifications
ParametreBirimTipikNot
Optik Güç Ölçer (OPM)
Kalibrasyon dalga boyunm850/980/1300/1310/1490/1550/1625
Dedektör TipiInGaA'lar
Kalibrasyon doğruluğudB±0.02@ -3dBm
Güç aralığıdBm−70~+6 / −50~+26
Ekran ünitesidB, dBm, uW
Optical adaptor type2.5mm universal + SC
Boyutmm88.5(G)x57(Y)x19.5(D)
Veri depolamaHiçbiri
Veri iletimiHiçbiri
Otomatik kapalıDakika5
Görsel Arıza Tespit Cihazı (VFL)
Merkezi Dalga Boyunm650Class 3b laser
Fiber uyumluluğuSingle & Multi mode fiber
Çıkış gücümW10
Algılama MesafesiKM10'den itibaren
Optical adaptor typeFor SC,FC,ST
Elektrik ve Çevre
GüçVAlkaline Battery (3AA 1.5V batteries)
Pil ömrüsaatler50 (Tipik)Typical in continuous mode
GörüntülemekLCD with back lights
Çalışma sıcaklığı°C20-75
Depolama sıcaklığı°C−40~85
Bağıl nem95% RH from 0~40°CNot

5. Kurulum Talimatları

5.1. Pil Kurulumu

  1. Locate the battery compartment on the back of the KPV-53 device.
  2. Pil bölmesinin kapağını açın.
  3. Insert three (3) AAA 1.5V alkaline batteries, ensuring correct polarity.
  4. Pil bölmesi kapağını sıkıca kapatın.

5.2. Connecting Fiber Optic Cables

The KPV-53 features a 2.5mm universal interface for the Optical Power Meter and a dedicated port for the Visual Fault Locator. Ensure to use the correct adapter for your fiber type.

  1. Remove the dust cap from the desired port (OPM or VFL).
  2. Clean the fiber optic connector end-face thoroughly using appropriate fiber cleaning tools.
  3. Insert the cleaned fiber optic connector into the device port. For OPM, the standard connector is SC UPC, but adapters for FC, ST, and LC are available (optional).
  4. Güvenli bir bağlantı sağlayın.
KPV-53 showing 2.5mm universal interface and various fiber connector types (FC, ST, SC, LC)
The device features a 2.5mm universal interface. Ensure to use the correct adapter for your fiber type (SC, FC, ST, LC).

6. Kullanım Talimatları

6.1. Güç Açma/Kapatma

  • Cihazı açmak için, tuşuna basın ve basılı tutun Güç düğme (Güç düğmesi simgesi) ekran aydınlanıncaya kadar.
  • Kapatmak için tuşunu basılı tutun. Güç button again. The device also features an automatic shutdown function after 5 minutes of inactivity.

6.2. Optical Power Meter (OPM) Function

  1. Connect the fiber optic cable to the OPM port as described in Section 5.2.
  2. Basın Dalga boyu (λ) button to cycle through the available calibrated wavelengths (850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm) until the desired wavelength is displayed.
  3. The current optical power measurement will be shown on the LCD in dBm, dB, or uW.
  4. Setting Reference (REF) and Unit (dB/dBm): Basın KAYNAK/dB button to switch between absolute (dBm) and relative (dB) measurements. To set a reference value for relative measurements, press and hold the KAYNAK/dB düğme.
  5. Kalibrasyon: For calibration, connect the KPV-53 to a light source of the same wavelength. Simultaneously press the KAYNAK/dB Ve VFL keys to enter the adjustment interface. Use the Dalga boyu (λ) key for downward adjustment and the KAYNAK/dB key for upward adjustment. Once the desired calibration is achieved, press the VFL key to save the parameters.
KPV-53 in use, connected to a fiber optic panel, demonstrating power meter and light source functions
The KPV-53 in action, measuring connection loss and evaluating transmission quality in an optical fiber link.

6.3. Visual Fault Locator (VFL) Function

  1. Connect the fiber optic cable to the VFL port as described in Section 5.2.
  2. Basın VFL button to activate the red laser.
  3. Observe the fiber for any light leakage, which indicates a break or fault. The VFL operates in both Continuous Wave (CW) and Modulation modes.
  4. Basın VFL button again to turn off the laser.
KPV-53 VFL function showing red laser output for fiber disconnection testing
The built-in VFL function emits a red laser to quickly and conveniently test for fiber disconnections.

6.4. Video Gösterimi

Watch this video for a demonstration of the Komshine KPV-53's calibration process and general usage.

7. Bakım

7.1. Temizlik

  • Always clean fiber optic connector end-faces before connecting them to the KPV-53 to prevent contamination and ensure accurate measurements. Use lint-free wipes and fiber optic cleaning solutions.
  • Keep the device's optical ports covered with dust caps when not in use to prevent dust and debris from entering.
  • Cihazın dış yüzeyini yumuşak, kuru bir bezle temizleyin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.

7.2. Depolama

  • When not in use, store the KPV-53 in its protective packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Uzun süre saklanacaksa, sızıntıyı önlemek için pilleri çıkarın.

8. Sorun Giderme

Cihaz açılmıyor:
Pillerin doğru şekilde takılıp takılmadığını ve yeterli şarja sahip olup olmadığını kontrol edin. Gerekirse pilleri değiştirin.
OPM ölçümlerinde hatalar:
Ensure the fiber optic connectors are clean. Verify that the correct wavelength is selected on the OPM. If readings are consistently off, consider recalibrating the device as per Section 6.2.
VFL laser is not visible:
Confirm that the fiber optic cable is properly connected to the VFL port. Ensure the VFL function is activated by pressing the VFL button. Check for any obstructions in the VFL output port.

9. Kullanıcı İpuçları

  • Always clean fiber optic connectors before use to ensure accurate measurements and prevent damage to the device's optical ports.
  • Utilize the appropriate fiber adapter for your specific connector type (SC, FC, ST, LC) to ensure a proper and secure connection.
  • Regularly check the battery levels, especially before critical testing, to avoid interruptions during operation.
  • When using the VFL, be mindful of the Class 3b laser and avoid direct eye exposure.

10. Garanti ve Destek

The Komshine KPV-53 comes with a 3-year warranty, providing assurance for your investment. For technical support, service inquiries, or to claim warranty, please refer to the contact information provided with your purchase or visit the official Komshine webyardım için site.