70mai Jump Starter Max Midrive PS06 Kullanım Kılavuzu

1. Giriş

The 70mai Jump Starter Max Midrive PS06 is a powerful and portable emergency device designed to jump start vehicles with dead batteries and serve as a power bank for electronic devices. With a peak current of 1000A and a battery capacity of 18000mAh, it is suitable for a wide range of vehicles and provides reliable power when you need it most.

2. Paket İçeriği

Lütfen aşağıdaki öğelerin kutucuğunu işaretleyin:

• 70mai Jump Starter Max Unit (x1)
• Smart Battery Clip (x1)
• DC to Cigarette Lighter Adapter (x1)
• Şarj Kablosu (x1)
• Saklama Çantası (x1)

3. Ürün Bittiview

The 70mai Jump Starter Max features a compact design with essential ports and indicators for ease of use.

4. Özellikler

5. Kurulum

5.1 İlk Şarj

1. Before first use, fully charge the 70mai Jump Starter Max.
2. Connect the provided charging cable to the input port on the jump starter.
3. Connect the other end of the charging cable to a suitable 5V 2A USB power adapter (not included).
4. The indicator lights will show the charging status. All lights will be solid when fully charged.

5.2 Pil Seviyesini Kontrol Etme

Press the power button briefly to check the current battery level. The indicator lights will illuminate to show the remaining charge.

6. Kullanım Talimatları

6.1 Aracın Takviyeyle Çalıştırılması

Güvenlik Önlemleri: Ensure the vehicle is in Park (P) or Neutral (N) and the parking brake is engaged. Turn off all vehicle accessories. Wear appropriate eye protection.

1. Atlama marşının yeterli şarja sahip olduğundan emin olun (en az %50 önerilir).
2. Connect the smart battery clip to the 70mai Jump Starter Max unit.
3. Kırmızı (+) cl'yi bağlayınamp of the smart battery clip to the positive (+) terminal of the vehicle's battery.
4. Siyah (-) cl'yi bağlayınamp of the smart battery clip to the negative (-) terminal of the vehicle's battery.
5. Ensure the smart battery clip indicator light is green, indicating a correct connection. If it's red or flashing, check the connections.
6. Aracın motorunu çalıştırın.
7. Once the engine starts, immediately remove the smart battery clip from the jump starter unit.
8. Ardından, siyah (-) kabloyu ayırın.amp araç aküsünden, ardından kırmızı (+) clamp.

6.2 Taşınabilir Şarj Cihazı Olarak Kullanımı

The 70mai Jump Starter Max can also charge your electronic devices.

1. Connect your device's USB charging cable to the USB output port (5.0V 2.4A) on the jump starter.
2. Atlama marşı cihazınızı otomatik olarak şarj etmeye başlayacaktır.

7. Bakım

7.1 Şarj Etme

• Recharge the jump starter after each use.
• En iyi pil ömrü için, kullanılmasa bile cihazı 3-6 ayda bir şarj edin.

7.2 Depolama

• Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Çocukların erişemeyeceği yerde saklayınız.
• Use the provided storage bag to protect the unit and accessories.

7.3 Temizlik

• Cihazı yumuşak, kuru bir bezle silin.
• Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.

8. Sorun Giderme

8.1 Vehicle Does Not Start

• Bağlantıları kontrol edin: Ensure the smart battery clips are securely connected to the correct terminals of the vehicle battery and the jump starter. The smart clip indicator should be green.
• Jump starter battery level: Make sure the jump starter has sufficient charge. Recharge if necessary.
• Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, multiple attempts or a longer connection might be needed. If the vehicle still doesn't start after a few attempts, there might be another issue with the vehicle.

8.2 Jump Starter Not Charging

• Check charging cable: Ensure the charging cable is properly connected to both the jump starter and the power adapter.
• Güç adaptörü: Verify that the USB power adapter is functional and provides 5V 2A output.

8.3 Smart Battery Clip Indicator Issues

• Red light/Flashing: Indicates incorrect connection (reversed polarity), short circuit, or other safety issue. Disconnect immediately and re-check connections.
• Işık yok: Ensure the clip is fully inserted into the jump starter port and the jump starter has power.

9. Kullanıcı İpuçları

• Özellikle uzun yolculuklardan önce veya soğuk havalarda akü takviye cihazının her zaman şarjlı olduğundan emin olun.
• Store the unit in your vehicle for easy access during emergencies.
• Familiarize yourself with the smart battery clip's indicator lights to quickly identify connection issues.

10. Garanti ve Destek

For warranty information and customer support, please refer to your purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.