MaXpeedingrods Suspension Rear Adjustable Control Arms

1. Giriş

Thank you for choosing MaXpeedingrods Suspension Rear Adjustable Control Arms. This product is designed to enhance the performance and adjustability of your Jeep Wrangler JK (2007-2018) when equipped with a 0-4 inch lift kit. These control arms help maintain proper suspension geometry, correct pinion angles, and improve off-road capability. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Özellikler

Image: MaXpeedingrods Rear Adjustable Control Arms, showcasing adjustable length from 430-520mm.

3. Uyumluluk

These control arms are compatible with the following Jeep Wrangler JK models:

Not: This product is not suitable for 2-door truck models. It is specifically designed for vehicles installed with a 4-inch lift kit.

Image: Compatibility table for Jeep Wrangler JK models.

4. Paket İçeriği

Paket şunları içerir:

• 2 x Rear Upper Control Arms

Image: Two rear upper control arms as packaged.

5. Özellikler

• OEM-Style Rubber Bushing: Located on the axle side for optimal vibration dampening and ride comfort.
• Flex Joint Design: Features a grease fitting on the frame side, allowing for greater articulation and durability, especially in off-road conditions.
• Ayarlanabilir Uzunluk: Designed for precise pinion angle adjustment, crucial for maintaining driveline angles after a lift.
• Toz Boyalı Kaplama: Provides excellent protection against corrosion, rust, and debris, extending the lifespan of the control arms.
• Tubular Design: Engineered for increased strength and rigidity, ensuring reliable performance under demanding conditions.

Resim: Ayrıntılı view of the control arm features, including rubber bushing, flex joint, tubular design, and powder coating.

6. Kurulum ve Kurulum

WARNING: Installation of suspension components requires specialized tools and knowledge. Improper installation can lead to serious injury or vehicle damage. Professional installation by a certified mechanic is highly recommended.

Before beginning installation, ensure your vehicle is on a level surface and properly supported with jack stands. Disconnect the battery and follow all safety precautions.

1. Araç Hazırlığı: Safely lift the rear of the vehicle and support it with jack stands. Remove the rear wheels.
2. Remove Old Control Arms: Carefully unbolt and remove the factory rear upper control arms. Note the orientation of the original components.
3. Install New Control Arms: Install the MaXpeedingrods adjustable control arms in the same locations. Ensure the OEM-style rubber bushing is on the axle side and the flex joint is on the frame side. Do not fully tighten bolts at this stage.
4. Uzunluğu Ayarla: With the vehicle at ride height (or simulating ride height), adjust the length of the control arms to achieve the correct pinion angle. This is critical for preventing driveline vibrations in lifted vehicles. Consult a service manual or a professional for specific pinion angle requirements for your lift height. The adjustable range is 430-520mm.
5. Donanımı Sıkın: Once the desired length and pinion angle are set, fully tighten all mounting hardware to the manufacturer's torque specifications.
6. Son Kontroller: Reinstall wheels, lower the vehicle, and perform a thorough inspection of all installed components. Check for any clearances issues or loose hardware.
7. Hizalama: A professional alignment is highly recommended after installing new suspension components to ensure proper handling and tire wear.

7. Kullanım Talimatları

Once installed, the adjustable control arms work to maintain the correct geometry of your vehicle's rear suspension, especially after a lift. They allow for precise adjustment of the pinion angle, which is essential for preventing driveline vibrations and premature wear on universal joints in lifted applications. The robust construction and flex joints improve articulation and durability, enhancing your Jeep's off-road performance and handling.

8. Bakım

• Düzenli Muayene: Periodically inspect the control arms, bushings, and flex joints for any signs of wear, damage, or corrosion. Check for loose bolts and re-torque as necessary.
• Yağlama: The flex joints on the frame side are equipped with grease fittings. Lubricate these joints regularly (e.g., every 3,000-5,000 miles or after off-road excursions) using a high-quality chassis grease to ensure smooth operation and longevity.
• Temizlik: Keep the control arms clean from excessive dirt, mud, and road salt to prevent corrosion, especially on the powder-coated surfaces.
• Hizalama Kontrolleri: If you notice any changes in handling, steering, or tire wear, have your vehicle's alignment checked by a professional.

9. Sorun Giderme

• Titreşimler: If you experience driveline vibrations after installation, the pinion angle may be incorrect. Re-adjust the control arm length to fine-tune the pinion angle. Professional assistance is recommended.
• Alışılmadık Sesler: Clunking or squeaking noises can indicate loose hardware, worn bushings, or lack of lubrication in the flex joints. Inspect all mounting points, re-torque bolts, and lubricate flex joints.
• Erken Aşınma: Excessive wear on tires or suspension components can be a sign of improper alignment or incorrect control arm adjustment. Have the vehicle inspected by a professional.

10. Kullanıcı İpuçları

• Profesyonel Kurulum: For best results and safety, consider having these control arms installed by a qualified mechanic, especially if you are unfamiliar with suspension work.
• Check Packaging: Upon receipt, inspect the package for any damage. Customers have noted that products are typically well-packaged and arrive undamaged.
• Özelleştirme: While the product is adjustable, if you have specific customization needs beyond the standard adjustments, please contact customer support for advice.
• Düzenli Kontroller: After initial installation and after any significant off-road use, perform a visual inspection and re-torque all fasteners to ensure everything remains secure.

11. Garanti ve Destek

Bu ürün bir 2 yıllık garanti against manufacturing defects. If you encounter any issues or have questions regarding the product, installation, or performance, please contact our support team:

• WhatsApp: +86 18374703022
• E-posta: 951804521@qq.com

12. Uyumluluk Bilgileri

⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Uyarılar.ca.gov.